Intermatic ET2815C Astro 365/7-Day Electronic Timer Instruction Manual

1. Uvod

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Intermatic ET2815C Astro 365/7-Day Electronic Timer. Please read this manual thoroughly before installation and use to ensure proper function and safety. This electronic timer is designed for precise control of electrical loads, offering advanced scheduling capabilities for various applications.

2. Sigurnosne informacije

UPOZORENJE: Opasnost od požara ili električnog udara

• Disconnect power at the circuit breaker(s) or disconnect switch(es) before installing or servicing this device.
• Možda će biti potrebno više od jednog prekidača ili prekidača za isključenje da bi se oprema isključila prije servisiranja.
• Instalacija i/ili ožičenje moraju biti u skladu sa nacionalnim i lokalnim zahtjevima električnih propisa.
• Koristite SAMO BAKARNE provodnike.
• Do NOT remove the insulator covering the terminals.

Upute za ožičenje: To wire, lift the terminal cover, remove the screw, and swing it aside. Replace the screw and the plastic insulator covering the terminal before powering on the device.

Ova slika prikazuje prednji dio view of the Intermatic ET2815C electronic timer. Visible elements include the digital display, control buttons such as MODE, DAY, ENTER/NEXT, ON/OFF, CLEAR MEM, and the CLEAR ENTRY buttons with plus and minus symbols. Below the main controls, safety warnings in English, French, and Spanish regarding electrical shock and fire hazards are printed, along with instructions for wiring and not removing the insulator. The model name 'Astro 365/7-Day' is prominently displayed at the top.

3. Proizvod je gotovview

The Intermatic ET2815C is an advanced electronic timer designed for precise control over electrical circuits. It features a user-friendly interface and robust capabilities suitable for a wide range of applications.

Ključne karakteristike:

• Astro 365/7-Day Operation: Provides flexible scheduling options for every day of the week, year-round.
• 96 Set Points/Events: Allows for up to 96 distinct ON/OFF programming events.
• 50 Holiday Blocks: Independent scheduling for up to 50 holiday periods.
• 100-Hour Supercapacitor: Eliminates the need for batteries by providing backup power for settings during outages.
• 2-Hour Override Mode: An additional mode of operation that turns the ON/OFF buttons into a 2-hour override function.
• Voltage: Operates on 120 to 277Vac.
• Amperage: Ocenjeno za 20 Amps.

Kontrolna dugmad:

Refer to the product image in Section 2 for the location of these buttons:

• UPUTE: Cycles through different programming modes.
• DAN: Used to set the day of the week or select specific days for programming.
• ENTER/NEXT: Confirms selections and moves to the next programming step.
• UKLJUČENO/ISKLJUČENO: Manually controls the load or activates override mode.
• CLEAR MEM: Clears all programmed events.
• CLEAR ENTRY: Clears the current entry during programming.
• + / - Dugmad: Adjust values (time, day, program number).

4. Instalacija

VAŽNO: Before proceeding with installation, ensure all safety warnings in Section 2 are understood and followed. Disconnect all power to the circuit at the breaker or disconnect switch before beginning any wiring.

Montaža:

1. Select a suitable location for mounting the timer, ensuring it is protected from moisture and extreme temperatures.
2. Mount the timer securely using appropriate fasteners.

Ožičenje:

All wiring must comply with national and local electrical codes. Use COPPER conductors ONLY.

1. Access the wiring terminals by lifting the terminal cover, removing the screw, and swinging it aside as indicated on the device.
2. Connect the incoming power supply wires (Line) and the load wires (to the device being controlled) to the appropriate terminals.
3. Uvjerite se da su svi spojevi čvrsti i sigurni.
4. Replace the screw and the plastic insulator covering the terminals before restoring power.
5. Restore power to the circuit at the breaker or disconnect switch.

5. Podešavanje

Initial Power-Up and Time Setting:

1. Upon initial power-up, the display may show a default time or be blank.
2. Pritisnite MODE button until the time setting mode is displayed.
3. Koristite + i - dugmad za podešavanje sata i minuta.
4. Pritisnite ENTER/NEXT da potvrdite vrijeme.
5. Koristite DAN dugme i + / - buttons to set the current day of the week.
6. Pritisnite ENTER/NEXT to confirm the day.
7. The timer is now set to the current time and day.

6. Uputstvo za upotrebu

Programming ON/OFF Events:

The ET2815C allows for up to 96 ON/OFF events.

1. Pritisnite MODE button until 'PROG' or 'PROGRAM' appears on the display.
2. The display will show 'P1 ON' (Program 1 ON). Use + / - da biste podesili željeno vrijeme uključivanja.
3. Pritisnite ENTER/NEXT.
4. Koristite DAN button to select the days of the week for this ON event (e.g., Mon-Fri, Daily, or specific days).
5. Pritisnite ENTER/NEXT.
6. The display will show 'P1 OFF'. Use + / - da biste podesili željeno vrijeme ISKLJUČIVANJA.
7. Pritisnite ENTER/NEXT.
8. Koristite DAN button to select the days of the week for this OFF event.
9. Pritisnite ENTER/NEXT to save Program 1 and move to 'P2 ON'.
10. Repeat steps for additional programs. To exit programming, press MODE dok se ne prikaže trenutno vrijeme.

Holiday Block Programming:

The timer supports up to 50 holiday blocks with independent scheduling.

1. Consult the full product manual for detailed steps on setting holiday blocks, as this feature involves specific date ranges.

Manual Override and 2-Hour Override Mode:

• Ručno uključivanje/isključivanje: Pritisnite ON/OFF button to manually switch the load ON or OFF, overriding the current program until the next scheduled event.
• 2-Hour Override: In a specific operating mode (refer to the full manual for activation), pressing the ON/OFF button will activate a 2-hour override, after which the timer will revert to its programmed schedule.

Programi za čišćenje:

• CLEAR ENTRY: During programming, press CLEAR ENTRY to clear the current value or selection.
• CLEAR MEM: To clear all programmed events, press and hold the CLEAR MEM button for a few seconds until the display confirms the memory has been cleared.

7. Održavanje

The Intermatic ET2815C timer is designed for minimal maintenance.

• čišćenje: Periodically wipe the exterior of the timer with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Rezervna kopija baterije: The timer utilizes a 100-hour supercapacitor for backup power, eliminating the need for battery replacement. This supercapacitor recharges automatically when power is supplied to the unit.

8. Otkrivanje problema

If you encounter issues with your Intermatic ET2815C timer, consider the following common troubleshooting steps:

• Prikaz tajmera je prazan: Check the power supply to the timer. Ensure the circuit breaker is ON and wiring connections are secure.
• Load Not Turning ON/OFF as Programmed:
  • Provjerite da li su trenutno vrijeme i dan ispravno postavljeni.
  • Review your programmed ON/OFF events for accuracy, including the selected days of the week.
  • Check if a manual override is active.
  • Ensure the load itself is functioning correctly.
• Težina programiranja: Refer back to Section 6 and follow the programming steps carefully. Use the CLEAR ENTRY button to correct mistakes during input.
• Tajmer ne reaguje: Disconnect power to the timer for a few minutes at the circuit breaker, then restore power. This may reset the unit.

If problems persist after attempting these steps, contact Intermatic customer support for further assistance.

9. Specifikacije

10. Garancija i podrška

This Intermatic product is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Intermatic website.

Za tehničku podršku, upite o proizvodu ili da biste pronašli ovlaštene servisne centre, posjetite Intermatic website ili direktno kontaktirajte njihovu službu za korisnike.