Uvod
The Darkglass Alpha Omega Ultra is a versatile bass preamplifier and overdrive pedal designed for modern bass players. It integrates two distinct distortion circuits, Alpha and Omega, which can be blended in parallel to achieve a wide range of responsive distorted tones. This unit offers an extremely high dynamic range and a comprehensive six-band active graphic equalizer for precise tone shaping. Essential features include a dedicated headphone output and a balanced direct output with switchable digital impulse-response cabinet emulation, making it a complete tool for various musical applications.
Ključne karakteristike
- Six-band graphic equalizer with high and low shelf controls for detailed tone sculpting.
- XLR output with switchable cabinet simulation for direct connection to mixing consoles or audio interfaces.
- Headphone output with integrated IR cabinet simulation for silent practice and monitoring.
- Dedicated footswitch to independently engage or bypass the distortion engine.
- Master volume control to adjust the overall output level of the unit.
Setup
Proper setup ensures optimal performance and sound quality from your Alpha Omega Ultra pedal. Follow these steps to connect your unit:
- Priključak za napajanje: Connect a 9V DC power supply (center negative) to the 9VDC input jack on the rear of the pedal. Ensure the power supply meets the pedal's requirements to prevent damage.
- Instrument ulaz: Spojite svoju bas gitaru na INPUT priključak pomoću standardnog instrumentalnog kabela od 1/4 inča.
- AmpLifier Izlaz: Povežite IZLAZ priključak za tvoj bas amplifier's input using a standard 1/4-inch instrument cable.
- Pomoćni ulaz: For practicing with backing tracks, connect an audio source (e.g., smartphone, MP3 player) to the AUX IN jack using a 1/8-inch stereo cable.
- Izlaz za slušalice: Za tihu vježbu, spojite slušalice na HEADPHONE output jack using a 1/8-inch stereo cable.
- Direct Output (XLR): For connecting to a mixing console, audio interface, or PA system, use an XLR cable from the DIREKTNI IZLAZ. This output includes switchable cabinet simulation.
- Prizemni lift: If you experience hum or ground loop noise when using the XLR output, press the GROUND LIFT button located near the USB port to isolate the ground connection.
- USB veza: The USB port is used for connecting the pedal to a computer to load Impulse Responses (IRs) for cabinet simulation and for firmware updates.

Image: Rear panel connections of the Alpha Omega Ultra pedal.
Uputstvo za upotrebu
The Alpha Omega Ultra offers extensive control over your bass tone. Familiarize yourself with the controls to achieve your desired sound.

Slika: Vrh view of the Alpha Omega Ultra pedal, highlighting the control layout.
Kontrole:
- Mješavina: Mixes the clean input signal with the overdriven signal. The clean signal remains at unity gain while the overdriven signal's volume is controlled by the Level knob, allowing for fine blending.
- Nivo: Sets the overall output volume of the overdriven signal.
- voziti: Controls the amount of gain in the overdriven signal.
- Mod: Selects between the Alpha (tighter, more defined) and Omega (rawer, more aggressive) distortion circuits. The knob blends between these two distinct voicings.
- Growl (Toggle Switch): Engages a bass boost before the distortion stage, adding thickness and low-end saturation.
- Bite (Toggle Switch): Engages a high-mid boost (2.8kHz) before the distortion stage, enhancing presence and attack.
- majstor: Controls the overall volume of the pedal, affecting both clean and distorted signals, as well as the headphone and XLR outputs.
Grafički ekvilajzer:
The Alpha Omega Ultra features a six-band graphic equalizer for precise tonal adjustments. Each slider controls a specific frequency band:
- bas: Low shelf control.
- 250 Hz: Mid-range frequency control.
- 500 Hz: Mid-range frequency control.
- 1.5 kHz: High-mid frequency control.
- 3 kHz: High-mid frequency control.
- Visoki tonovi: High shelf control.
nožni prekidači:
- Distortion Footswitch: Activates or bypasses the distortion engine. When engaged, the LED illuminates.
- Zaobilazni nožni prekidač: Activates or bypasses the entire pedal. When engaged, the LED illuminates.
Simulacija kabineta:
The Alpha Omega Ultra includes digital impulse-response (IR) cabinet simulation. This feature is active on the XLR Direct Output and the Headphone Output. You can load custom IRs via the USB port and Darkglass Suite software to tailor your cabinet sound.
Video: Prekorview of the Darkglass Alpha Omega pedal's features and sound capabilities. This video demonstrates the pedal in use with a bass guitar, showcasing its various controls and the resulting tonal variations.
Održavanje
To ensure the longevity and optimal performance of your Darkglass Alpha Omega Ultra, follow these maintenance guidelines:
- čišćenje: Use a soft, dry cloth to clean the pedal's exterior. Avoid abrasive cleaners, solvents, or excessive moisture, which can damage the finish and internal components.
- Skladištenje: Čuvajte pedalu na hladnom i suhom mjestu, dalje od direktne sunčeve svjetlosti, ekstremnih temperatura i visoke vlažnosti. Kada se ne koristi duži period, isključite napajanje.
- Napajanje: Always use a regulated 9V DC (center negative) power supply with sufficient current capacity (typically 200mA or more). Using an incorrect power supply can damage the unit and void the warranty.
- Veze: Povremeno provjeravajte sve kablovske spojeve na istrošenost i oštećenja. Osigurajte da su utičnice bez prašine i ostataka.
- Ažuriranja firmvera: Check the Darkglass Electronics website regularly for firmware updates. Updates can improve performance, add features, or fix bugs. Use the Darkglass Suite software and a USB cable for updates.
Rješavanje problema
If you encounter issues with your Alpha Omega Ultra, refer to the following common problems and solutions:
- Nema zvuka:
- Provjerite je li napajanje ispravno spojeno i da funkcionira.
- Provjerite sve kablove instrumenta da li su ispravno spojeni i da li su ispravno spojeni.
- Verify that both the Distortion and Bypass footswitches are engaged (LEDs illuminated) or bypassed as intended.
- Check the Master volume and Level knobs are not set to minimum.
- Neželjena buka/zujanje:
- If using the XLR output, press the GROUND LIFT button to eliminate ground loop hum.
- Ensure you are using a high-quality, regulated power supply. Unregulated power supplies can introduce noise.
- Provjerite ima li neispravnih kablova ili smetnji od drugih elektroničkih uređaja.
- Distortion Not Engaging:
- Ensure the Distortion footswitch is pressed and its LED is illuminated.
- Check the Drive knob is turned up sufficiently.
- Adjust the Blend knob to ensure the distorted signal is audible.
- EQ ne reaguje:
- Ensure the pedal is powered on and active.
- Move the EQ sliders to their extreme positions to confirm functionality.
If these steps do not resolve your issue, please contact Darkglass Electronics customer support.
Specifikacije
| Specifikacija | Vrijednost |
|---|---|
| Broj modela | ALPHA OMEGA ULTRA v2 |
| Težina artikla | 1 funta (otprilike 0.45 kg) |
| Dimenzije proizvoda | 72 x 52 x 0.01 inča (približno 183 x 132 x 0.025 cm) |
| Izvor napajanja | Corded Electric (9V DC, Center Negative) |
| Voltage | 9 Volts |
| Hardversko sučelje | USB |
| Format signala | Analog |
| Boja | Plava |
| Datum prve dostupnosti | 12. aprila 2020 |

Image: Bottom panel of the Alpha Omega Ultra pedal.
Garancija i podrška
For detailed warranty information and customer support, please refer to the official Darkglass Electronics webweb-mjesto ili direktno kontaktirajte njihov tim za podršku. Sačuvajte račun kao dokaz o kupovini za reklamacije u slučaju garancije.
Više informacija i resursa za podršku možete pronaći na Darkglass Electronics Store.





