Truper 13499 PRES-1/3T Uputstvo za upotrebu pumpe za povećanje pritiska

1. Uvod

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Truper 13499 PRES-1/3T 1/3 HP Pressure Booster Pump. Please read these instructions carefully before installation and use to ensure proper function and to prevent damage or injury. Keep this manual for future reference.

2. Sigurnosne informacije

Uvijek poštujte sljedeće sigurnosne mjere:

• Osigurajte da napajanje odgovara snazi ​​pumpe.tage and frequency (127 V - 60 Hz).
• Isključite napajanje prije izvođenja bilo kakvog održavanja ili instalacije.
• Do not operate the pump with flammable liquids.
• Zaštitite pumpu od temperatura smrzavanja.
• Instalaciju treba izvršiti kvalificirani stručnjak ako niste sigurni.
• Držite djecu i neovlaštene osobe dalje od pumpe koja radi.

3. Komponente proizvoda

The Truper 13499 PRES-1/3T Pressure Booster Pump includes the main pump unit, an integrated pressure switch, and power cord with an on/off switch. Refer to the image below for a visual representation of the pump and its key components.

Slika 1: Truper 13499 PRES-1/3T Pressure Booster Pump. This image shows the complete pump assembly, including the orange motor housing, the dark gray pump body, brass fittings for water inlet and outlet, and the integrated flow switch with an arrow indicating water flow direction. The power cord with an inline on/off switch is also visible.

Ključne komponente:

• Tijelo pumpe: Dark gray cast iron housing for the impeller and water channels.
• Kućište motora: Orange casing protecting the electric motor.
• Inlet/Outlet Fittings: Brass threaded connections for plumbing.
• Prekidač protoka: Orange component with an arrow, detecting water flow to activate the pump.
• Kabl za napajanje: Electrical connection with an integrated on/off switch.

4. Postavljanje i instalacija

Pravilna instalacija je ključna za performanse i dugotrajnost pumpe.

1. Lokacija:
   • Instalirajte pumpu na suhom, dobro prozračenom mjestu, zaštićenom od direktne sunčeve svjetlosti, kiše i temperatura smrzavanja.
   • Ensure the pump is placed on a stable, level surface to minimize vibration.
   • Allow adequate space around the pump for ventilation and maintenance access.
2. Vodovodni priključci:
   • Connect the pump to the water supply line using appropriate plumbing fittings. Ensure all connections are watertight.
   • Observe the flow direction indicated by the arrow on the flow switch (Figure 1). The pump must be installed in line with the water flow.
   • Use flexible connectors to reduce vibration transmission to the plumbing system.
   • Install shut-off valves on both the inlet and outlet sides of the pump for easier maintenance.
3. Električni priključak:
   • Ensure the power outlet is properly grounded and matches the pump's electrical requirements (127 V - 60 Hz).
   • Plug the pump's power cord into the grounded outlet.
   • Do not use extension cords unless absolutely necessary, and ensure they are rated for the pump's power requirements.
4. Punjenje pumpe:
   • Before initial operation, ensure the pump is filled with water to prevent dry running. Open a faucet downstream to allow air to escape.
   • Once water flows steadily from the faucet, close it. The pump is now primed.

5. Uputstvo za upotrebu

The Truper 13499 PRES-1/3T pump operates automatically based on water flow.

1. Prvo pokretanje:
   • After installation and priming, ensure the inline switch on the power cord is in the "OFF" position.
   • Uključite pumpu u odgovarajuću električnu utičnicu.
   • Switch the inline power switch to the "ON" position. The pump will remain off until water flow is detected.
2. Automatski rad:
   • When a water outlet (e.g., faucet, shower) is opened, the flow switch detects water movement.
   • The pump automatically starts, boosting water pressure.
   • When the water outlet is closed, the flow stops, and the pump automatically shuts off after a short delay.
3. Radni ciklus:
   • The pump is designed for intermittent use: 50 minutes of work followed by 20 minutes of rest.
   • The daily maximum operating time is 6 hours. Adhering to this duty cycle will prolong the pump's lifespan.

6. Održavanje

Redovno održavanje osigurava optimalne performanse i produžava vijek trajanja vaše pumpe.

• čišćenje: Periodically clean the exterior of the pump to prevent dust and debris buildup. Do not use harsh chemicals.
• Veze: Regularly check all plumbing and electrical connections for leaks or loose fittings. Tighten as necessary.
• Zimljenje: If the pump is installed in an area subject to freezing temperatures, it must be drained and disconnected during winter months to prevent damage.
• inspekcija: Pregledajte kabel za napajanje da li ima znakova oštećenja ili istrošenosti. Zamijenite ako je potrebno.

Warning: Always disconnect the pump from the power supply before performing any maintenance.

7. Otkrivanje problema

This section addresses common issues you might encounter with your pressure booster pump.

8. Tehničke specifikacije

9. Garancija i podrška

For warranty information or technical support, please refer to the documentation included with your purchase or contact Truper customer service. Keep your purchase receipt as proof of purchase.

For further assistance, visit the official Truper webstranicu ili kontaktirajte njihove ovlaštene servisne centre.