Orbit 24620 Uputstvo za upotrebu tajmera za slavinu sa 1 izlazom

Uvod

Thank you for choosing the Orbit 24620 1-Outlet Hose Faucet Timer. This device is designed to automate your watering schedule, providing convenience and efficiency for your lawn and garden. With its user-friendly interface and robust construction, you can easily program precise watering times, helping to conserve water and maintain healthy plants. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance of your timer.

Važne informacije o sigurnosti

• Read all instructions carefully before operating the timer.
• Do not immerse the timer in water. It is water-resistant, not waterproof.
• Use only fresh alkaline batteries of the specified type (e.g., AA or AAA). Do not mix old and new batteries or different battery types.
• Remove batteries if the timer will not be used for an extended period to prevent corrosion.
• Do not expose the timer to extreme temperatures (below freezing or above 120°F / 49°C).
• Uvjerite se da su svi spojevi čvrsti kako biste spriječili curenje.
• Čuvati van domašaja djece.

Komponente proizvoda

Familiarize yourself with the main parts of your Orbit 1-Outlet Hose Faucet Timer:

• Ulazni priključak: Connects to your outdoor faucet.
• Izlazni priključak: Connects to your garden hose.
• Digitalni prikaz: Shows time, program settings, and status.
• Control Dial: Used to navigate through programming options.
• Dugmad: For setting specific values (e.g., "SET CLOCK", "START TIME", "HOW LONG", "HOW OFTEN", "AUTO/MANUAL", "OFF").
• Pretinac za baterije: Located on the back or side, for battery installation.

Slika 1: Front view of the Orbit 1-Outlet Hose Faucet Timer, showing the digital display and control dial. The inlet is at the top, and the outlet is at the bottom.

Postavljanje i instalacija

1. Instalacija baterije

1. Locate the battery compartment on the back or side of the timer.
2. Remove the battery tray or cover.
3. Umetnite dvije (2) nove AA alkalne baterije, pazeći na ispravan polaritet (+/-).
4. Replace the battery tray or cover securely. The display should light up.

2. Attaching the Timer to the Faucet

1. Provjerite je li vanjska slavina zatvorena.
2. Thread the timer's inlet connection (top) onto your outdoor faucet.
3. Hand-tighten until snug. Do not overtighten.
4. Turn on your faucet fully. The timer is designed to operate under full water pressure.

3. Attaching the Hose

1. Thread your garden hose onto the timer's outlet connection (bottom).
2. Zategnite rukom dok ne pričvrstite.

Slika 2: Side view of the Orbit 1-Outlet Hose Faucet Timer, showing the robust construction and connections.

Uputstvo za upotrebu

The Orbit timer features a large digital display and a simple dial for programming. Rotate the dial to select a setting, then use the buttons to adjust values.

1. Postavite sat

1. Okrenite točkić na SET CLOCK.
2. Sat će treptati. Koristite + i - buttons to set the current hour (AM/PM).
3. Pritisnite NEXT dugme za prelazak na minute.
4. Koristi + i - to set the current minutes.
5. Pritisnite NEXT za potvrdu.

2. Vrijeme početka

1. Okrenite točkić na VRIJEME POČETKA.
2. Set the desired time for watering to begin using the + i - buttons for hour and minutes.
3. Pritisnite NEXT za potvrdu.

3. How Long (Watering Duration)

1. Okrenite točkić na KOLIKO DUGO.
2. Set the duration for each watering cycle from 1 to 360 minutes using the + i - dugmad.
3. Pritisnite NEXT za potvrdu.

4. How Often (Watering Frequency)

1. Okrenite točkić na KOLIKO ČESTO.
2. Postavite frekvenciju:
   • Every hour (for short, frequent watering)
   • Every 6, 12 hours
   • Every 1, 2, 3... up to 7 days
3. Koristite + i - buttons to select the desired interval.
4. Pritisnite NEXT za potvrdu.

5. Auto/Manual Operation & Rain Delay

• AUTOMATSKI: Okrenite točkić na AUTO/MANUALNOTajmer će sada raditi prema vašem programiranom rasporedu.
• PRIRUČNIK: To manually water, turn the dial to AUTO/MANUALNO, zatim pritisnite MANUAL dugme. Koristi + i - to set a manual watering duration, then press ENTER to start. The timer will revert to AUTO after the manual cycle.
• ODLOŽAVANJE KIŠE: If rain is expected, you can pause your watering schedule. Turn the dial to AUTO/MANUALNO, zatim pritisnite i držite RAIN DELAY dugme. Koristi + i - to select a delay of 1 to 7 days. The timer will resume its schedule after the delay.

6. ISKLJUČENO

Okrenite točkić na OFF to stop all automatic and manual watering. The timer will remain off until the dial is moved to another setting.

Održavanje

Zamjena baterije

When the battery indicator on the display shows low power, or if the display becomes dim, it's time to replace the batteries. Follow the battery installation steps in the "Setup and Installation" section. Replacing batteries typically retains your programmed settings for a short period, but it's good practice to verify them after replacement.

Čišćenje

Obrišite tajmer s oglasomamp cloth to remove dirt or debris. Do not use abrasive cleaners or solvents. Ensure the battery compartment remains dry.

Zimovanje

Before the first frost, remove the timer from the faucet. Drain any water from the timer and store it indoors in a dry, protected location where temperatures will not drop below freezing. Remove batteries before storage.

Rješavanje problema

Specifikacije

Slika 3: Dimensions of the Orbit 1-Outlet Hose Faucet Timer: 7.62cm depth, 18.11cm height, 22.56cm width.

Informacije o garanciji

Orbit products are manufactured with quality materials and workmanship. For specific warranty details, please refer to the warranty card included with your product or visit the official Orbit webSačuvajte račun kao dokaz o kupovini.

Korisnička podrška

If you have any questions, require technical assistance, or need to troubleshoot issues not covered in this manual, please contact Orbit customer support.

• Webstranica: www.orbitonline.com
• Telefon: Refer to the Orbit webstranica za regionalne kontakt brojeve.