Okin Okin Refined 2 Button Round Hand Control Handset

Okin Refined okrugli ručni upravljač s 2 tipke - uputstvo za upotrebu

Model: Okin Refined 2 Button Round Hand Control Handset

Marka: Okin

1. Uvod

This manual provides comprehensive instructions for the Okin Refined 2 Button Round Hand Control Handset, designed for use with power recliners and lift chairs. This original Okin power recliner switch plugs directly into the actuator motor, offering reliable control for your furniture.

Ključne karakteristike uključuju:

Okin 2 Button Round Hand Control Handset

Figure 1.1: The Okin Refined 2 Button Round Hand Control Handset, showing its compact design and integrated cable.

2. Postavljanje i instalacija

Before installation, ensure your existing control uses a 5-pin round plug for compatibility. This control is designed for straightforward replacement.

2.1 Identifikacija konektora

The Okin Refined Hand Control features a distinct 5-pin 90-degree connector. Verify that your recliner or lift chair's motor connection port matches this configuration.

Close-up of 5-pin 90-degree connector

Slika 2.1: Detaljno view of the 5-pin 90-degree connector, crucial for compatibility verification.

2.2 Koraci instalacije

  1. Isključite napajanje: Before beginning, always unplug your recliner or lift chair from the wall outlet to prevent electrical hazards.
  2. Locate Existing Control: Identify where the current hand control is connected to the chair's motor or power supply. This is typically a cable running from the control to a port on the motor.
  3. Remove Old Control: Carefully disconnect the existing 5-pin plug from the motor. If the control is mounted in the arm, gently remove it from its housing.
  4. Connect New Control: Plug the 5-pin 90-degree connector of the new Okin hand control into the corresponding port on the chair's motor. Ensure the connection is firm and secure.
  5. Mount New Control: Insert the new round hand control into the designated opening in the arm of your recliner or lift chair. Ensure it sits flush and is stable.
  6. Vrati snagu: Once the new control is securely installed, plug your recliner or lift chair back into the wall outlet.

Video 2.1: Overview demonstrating the Okin 2 Button Round Hand Control Handset, including its features and connection type, which can assist with installation.

3. Uputstvo za upotrebu

The Okin Refined Hand Control is designed for simple and intuitive operation.

3.1 Basic Recliner Operation

Close-up of the two-button control

Figure 3.1: Close-up of the two-button control, showing the distinct "Up" and "Down" sections.

3.2 USB Charging Functionality

This control features an integrated USB port, allowing you to charge compatible electronic devices such as smartphones and tablets while using your recliner. Simply connect your device's USB charging cable to the port on the hand control.

Napomena: Charging speed may vary depending on the device and the power supply of your recliner. The USB port is for charging only and does not provide data transfer capabilities.

4. Održavanje

Proper maintenance ensures the longevity and optimal performance of your Okin Refined Hand Control.

5. Otkrivanje problema

If you encounter issues with your Okin Refined Hand Control, refer to the following common troubleshooting steps:

ProblemMogući uzrokRješenje
Control is unresponsive or intermittent.Loose connection, power supply issue, damaged cable.
  • Ensure the 5-pin connector is fully and securely plugged into the motor.
  • Check that the recliner's power cord is securely plugged into a working wall outlet.
  • Inspect the entire length of the control cable for any visible damage (cuts, kinks, fraying). If damaged, replacement may be necessary.
  • Verify the chair's main power supply (transformer) is functioning correctly.
USB port ne puni uređaje.Device incompatibility, cable issue, power supply.
  • Ensure your device and charging cable are functioning correctly by testing them with another power source.
  • Verify the recliner is powered on and fully connected.
  • Some devices may require more power than the USB port can provide.
Chair moves slowly or with difficulty.Motor issue, obstruction, low power.
  • Check for any obstructions preventing the chair's mechanism from moving freely.
  • Ensure the power supply is adequate and stable.
  • If the issue persists, the motor itself may require professional inspection.

Ako ovi koraci ne riješe problem, obratite se korisničkoj podršci ili kvalificiranom tehničaru.

6. Specifikacije

AtributDetalj
BrandOkin
BojaCrna
Težina artikla3.52 unce
Dimenzije paketa4.61 x 3.7 x 1.89 inča
ProizvođačOkin Refined
Form FactorRecliner (Control)
Tip konektora5-pin Round, 90-degree
Uključene komponenteUSB Cable (integrated into control)
KompatibilnostOkin, Flexsteel, Dewert, Limoss motors
Preporučena upotrebaPower Recliners, Lift Chairs, Home Theater Seating

7. Sigurnosne informacije

For safe use of your recliner or lift chair with this control, please observe the following safety guidelines:

Refer to the product's original packaging or documentation for any additional safety information specific to your recliner or lift chair.

8. Garancija i podrška

For information regarding warranty coverage for your Okin Refined 2 Button Round Hand Control Handset, please refer to the documentation provided with your original purchase or contact the seller directly.

If you require technical assistance, have questions about compatibility, or need to report a defect, please reach out to Okin customer support or the retailer from whom you purchased the product. Provide your product model number and purchase date when contacting support to facilitate a quicker resolution.

Povezani dokumenti - Okin Refined 2 Button Round Hand Control Handset

Preview Upute za sastavljanje YB2213 Power Lift Recliner stolice
Detaljan vodič za sastavljanje YB2213 fotelje s električnim podizanjem, uključujući sadržaj paketa, korake spajanja i upute za ožičenje napajanja i daljinskih upravljača. Ima funkcije grijanja i masaže.
Preview OKIN HSW306 Vodič za zamjenu daljinskog upravljača sa 5-pinskog na 7-pinski konektor
Detaljne upute za zamjenu OKIN HSW306 daljinskog upravljača za naslonjač s 5 pinova s ​​7-pinskim modelom, uključujući premosnicu ožičenja, korake instalacije i preporučenu dodatnu opremu.
Preview Vodič za rješavanje problema s Okin Systemsima: Popravak i održavanje lift stolice
Sveobuhvatni vodič za rješavanje problema za Okin sisteme koji se koriste u podiznim stolicama. Naučite dijagnosticirati i rješavati uobičajene probleme s ručnim komandama, transformatorima, motorima i maticama vretena. Uključuje savjete za instalaciju.
Preview OKIN Refined Electric Technology Uputstvo za upotrebu sistema daljinskog upravljanja
Ovaj priručnik pruža detaljna uputstva za upotrebu sistema daljinskog upravljanja OKIN Refined Electric Technology, obuhvatajući opise dugmadi, postavke posebnih položaja i postupke bežičnog uparivanja.
Preview OKIN RF.31.24.01 Uputstvo za upotrebu sistema daljinskog upravljanja
Sveobuhvatno korisničko uputstvo za OKIN RF.31.24.01 sistem daljinskog upravljanja sa 22 tastera, koje detaljno opisuje funkcije tastera, postupke podešavanja položaja i komponente sistema za podesive krevete.
Preview OKIN Sistemi za sjedenje: Komponente za pokretni namještaj
Sveobuhvatan katalog OKIN-ovih sistema za sjedenje, uključujući ručne i električne mehanizme za naginjanje, mehatroniku, podizne stolice, stolice za opuštanje, naslone za glavu, lumbalne oslonce, aktuatore, ručice, prekidače i pribor za pokretni namještaj.