SINOTIMER MC901-611 Universal Intelligent Temperature Control Meter User Manual

Brand: SINOTIMER

Model: MC901-611

1. Uvod

The SINOTIMER MC901-611 is a universal intelligent temperature control meter designed for precise temperature regulation in various industrial and laboratory applications. This device features a clear LCD display, multiple input types, and reliable output options, making it suitable for a wide range of temperature control needs. This manual provides essential information for the safe and effective operation, installation, and maintenance of your MC901-611 temperature controller.

2. Sigurnosne informacije

Please read this manual thoroughly before operating the device to ensure safe and correct usage. Keep this manual for future reference.

Opće sigurnosne mjere:

Osigurajte napajanje voltage matches the specifications of the device (100-240V AC, 50/60Hz).
Do not operate the device in environments with excessive dust, humidity, corrosive gases, or strong vibrations.
Disconnect power before performing any wiring, maintenance, or inspection.
Samo kvalifikovano osoblje treba da obavlja instalaciju i ožičenje.
Avoid touching internal components when the device is powered on.
Osigurajte ispravno uzemljenje kako biste spriječili strujni udar.
Ne rastavljajte niti modificirajte uređaj. Neovlaštene modifikacije mogu poništiti garanciju i predstavljati sigurnosni rizik.

3. Proizvod je gotovview

The MC901-611 temperature controller features a compact design with a clear digital display and intuitive control buttons.

Front view of the SINOTIMER MC901-611 temperature controller showing the PV and SV displays, indicator lights, and control buttons.

Slika 3.1: Prednja ploča
This image displays the front panel of the MC901-611. It features two digital displays: PV (Process Value) in red, showing the current temperature, and SV (Set Value) in green, showing the target temperature. Below the displays are indicator lights for OUT (Output), AT (Auto-tuning), ALM1 (Alarm 1), and ALM2 (Alarm 2). The control buttons include SET, R/S (Run/Stop), Down arrow, and Up arrow.

Ključne komponente:

PV ekran: Shows the current measured temperature (Process Value).
SV ekran: Shows the set target temperature (Set Value).
Indikatorska svjetla: OUT (Output status), AT (Auto-tuning status), ALM1 (Alarm 1 status), ALM2 (Alarm 2 status).
Kontrolna dugmad: SET (Enter/Confirm settings), R/S (Run/Stop), Up/Down arrows (Adjust values).
Terminalni blok: Located at the rear for electrical connections.
Montažni nosači: For secure panel installation.

Side view of the SINOTIMER MC901-611 temperature controller showing the product label with specifications.

Figure 3.2: Side Panel with Specifications Label
This image shows the side of the MC901-611, highlighting the product label. The label provides crucial information such as Model (MC901-611), Input type (K, default setting), Temperature Range (0-1300°C), Temperature Unit (Celsius/Fahrenheit), Output type (Relay/SSR), Alarm (ALM1), Accuracy Class (0.5), and Power Supply (100-240V AC, 50/60Hz).

Pozadi view of the SINOTIMER MC901-611 temperature controller showing the wiring terminal block.

Figure 3.3: Rear Panel with Terminal Block
This image displays the rear of the MC901-611, featuring the terminal block for electrical connections. The terminals are clearly numbered, indicating where to connect power, sensor inputs, and control outputs. Proper wiring according to the provided diagram is essential for safe and correct operation.

4. Postavljanje i instalacija

4.1 Panel Mounting:

The MC901-611 is designed for panel mounting. Ensure the cutout dimensions in your panel match the device's specifications.

Cut an opening in your panel according to the specified dimensions (refer to specifications section for exact size).
Insert the MC901-611 into the panel cutout from the front.
Attach the provided mounting brackets to the sides of the controller from the rear of the panel.
Tighten the screws on the mounting brackets to secure the controller firmly in place. Do not overtighten.

Two black mounting brackets with screws for securing the temperature controller to a panel.

Slika 4.1: Montažni nosači
This image shows the two mounting brackets included with the MC901-611. These brackets are used to secure the temperature controller firmly within a panel cutout, ensuring stable installation.

4.2 Dijagram ožičenja:

Refer to the wiring diagram on the side of the unit or in the detailed manual for correct connections. Ensure all connections are secure and insulated.

Napajanje: Connect the main power supply (100-240V AC, 50/60Hz) to the designated terminals.
Ulaz senzora: Connect your temperature sensor (e.g., K-type thermocouple) to the sensor input terminals. Ensure correct polarity for thermocouples.
Kontrolni izlaz: Connect your heating/cooling element or SSR to the control output terminals.
Izlaz alarma (opciono): If using alarm functions, connect external alarm devices to the alarm output terminals.

Note: A detailed wiring diagram is typically provided on the physical unit or in a separate wiring guide. Always consult the specific diagram for your model.

5. Uputstvo za upotrebu

5.1 Uključivanje:

Once wired correctly, apply power to the unit. The PV display will show the current temperature, and the SV display will show the last set temperature.

5.2 Setting the Target Temperature (SV):

Pritisnite SET dugme jednom. SV displej će početi treptati.
Koristite Up (▲) i Dole (▼) arrow buttons to adjust the target temperature.
Pritisnite SET button again to confirm the new SV and exit the setting mode. The SV display will stop flashing.

5.3 Postavke parametara:

To access advanced parameter settings (e.g., input type, control mode, alarm settings):

Pritisnite i držite SET button for approximately 3-5 seconds until the first parameter code appears on the PV display.
Koristite Up (▲) i Dole (▼) arrow buttons to navigate through different parameter codes.
Pritisnite SET to view the value of the currently displayed parameter.
Koristite Up (▲) i Dole (▼) arrow buttons to change the parameter value.
Pritisnite SET to confirm the new value and return to the parameter code display.
To exit parameter setting mode, press and hold the SET ponovo pritisnite dugme 3-5 sekundi ili pričekajte da se uređaj automatski isključi nakon perioda neaktivnosti.

Consult the full product manual for a complete list of parameter codes and their functions.

5.4 Auto-tuning (AT):

Auto-tuning helps the controller optimize its PID parameters for stable and accurate temperature control. This process is recommended after initial setup or if control performance is unsatisfactory.

Set the desired target temperature (SV).
Pritisnite i držite R/S button for approximately 3-5 seconds. The AT indicator light will illuminate, and the controller will begin the auto-tuning process.
Allow the auto-tuning process to complete. This may take some time as the controller cycles the output to learn the system's characteristics. The AT light will turn off once tuning is complete.
Do not interrupt the auto-tuning process.

6. Održavanje

Regular maintenance ensures the longevity and optimal performance of your MC901-611 temperature controller.

čišćenje: Disconnect power before cleaning. Use a soft, dry cloth to wipe the surface of the unit. Do not use abrasive cleaners, solvents, or water, as these can damage the display or internal components.
inspekcija: Periodically check all wiring connections for looseness or damage. Ensure the terminal screws are tight.
Okruženje: Osigurajte da radno okruženje ostane unutar specificiranih raspona temperature i vlažnosti kako biste spriječili oštećenja.
Provjera senzora: If temperature readings appear inaccurate, check the sensor and its wiring for damage or corrosion.

7. Otkrivanje problema

This section addresses common issues you might encounter with your MC901-611 temperature controller.

Problem	Mogući uzrok	Rješenje
Nema prikaza/Isključeno	Nema napajanja; Labavo ožičenje; Pregoreli osigurač.	Check power connection; Verify wiring; Replace fuse if necessary (by qualified personnel).
PV display shows "HHHH" or "LLLL"	Sensor open circuit (HHHH); Sensor short circuit or reverse connection (LLLL); Sensor type mismatch.	Check sensor wiring and connections; Ensure correct sensor type is selected in parameters.
Temperature not controlled accurately	Incorrect PID parameters; Sensor not properly installed; Load capacity mismatch.	Perform auto-tuning; Ensure sensor is in good thermal contact with the process; Verify output capacity matches load.
Output indicator (OUT) not lighting up	SV is equal to PV (no control action needed); Output wiring issue; Internal fault.	Check SV and PV values; Inspect output wiring; If problem persists, contact support.

Ako problem i dalje postoji nakon isprobavanja ovih rješenja, obratite se korisničkoj podršci.

8. Specifikacije

Technical specifications for the SINOTIMER MC901-611 Universal Intelligent Temperature Control Meter.

Feature	Specifikacija
Model	MC901-611
Tip unosa	K (default setting), Universal Input
Temperaturni opseg	0-1300°C (depending on sensor type)
Temperaturna jedinica	Celsius/Fahrenheit selectable
Output Type	Relej/SSR
Alarm	ALM1
Klasa tačnosti	0.5
Napajanje	100-240V AC, 50/60Hz
Display Type	LCD
Težina artikla	8.8 unce
Dimenzije paketa	4.3 x 4.3 x 3.6 inča

9. Garancija i podrška

Informacije o garanciji:

SINOTIMER products are typically covered by a limited warranty against defects in materials and workmanship. Please refer to the warranty card included with your product or contact SINOTIMER customer service for specific warranty terms and conditions.

Korisnička podrška:

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact SINOTIMER customer support. Have your product model number (MC901-611) and purchase information ready when contacting support.

Contact information for SINOTIMER can usually be found on their official webweb-mjestu ili na ambalaži proizvoda.

	SINOTIMER DDS6619 Serija Prekidač za Doziranje Vodilice Uputstvo za Uputstvo Uputstvo za upotrebu za mjerne prekidače sa vodilicom serije SINOTIMER DDS6619. Detaljne tehničke specifikacije, ožičenje, upravljanje aplikacijom putem Smart Life/Tuya, uputstva za upotrebu i sigurnosne mjere za pametno praćenje energije.
	Korisnički priručnik za inteligentni regulator temperature serije MC-101 Korisnički priručnik za inteligentni regulator temperature serije MC-101, u kojem su detaljno opisane njegove karakteristike, rad i postavke za preciznu kontrolu temperature.
	SINOTIMER SVP719 Korisnički priručnik: Svezaktage Zaštitnik, mjerač energije i monitor potrošnje energije Sveobuhvatno korisničko uputstvo za SINOTIMER SVP719, koje detaljno opisuje njegove karakteristike kao što je podesivi regulator jačine zvuka (preko/premore jačine zvuka).tagzaštita od prenapona, relej za ograničenje prekomjerne struje i mjerač energije u vatima/kWh za praćenje potrošnje energije.
	Sinotimer MT-S PID regulator temperature: Karakteristike, specifikacije i vodič za podešavanje Detaljne informacije o Sinotimer MT-S inteligentnom PID releju za regulaciju temperature, uključujući karakteristike, tehničke specifikacije, dijagrame ožičenja i upute za podešavanje PID i On-Off načina regulacije.
	SINOTIMER WiFi pametni prekidač - uputstvo za upotrebu Sveobuhvatno uputstvo za upotrebu SINOTIMER WiFi pametnog prekidača, koje detaljno opisuje podešavanje mreže putem Graffiti Smart aplikacije, postupke odvajanja i resetovanja uređaja, status indikatorske lampice, prikaz potrošnje električne energije i konfiguraciju prenapona.tage, undervoltage, i postavke zaštite od prekomjerne struje.
	SINOTIMER STC-916W WIFI Smart Temperature Controller Instruction Manual Instruction manual for the SINOTIMER STC-916W WIFI Smart Temperature Controller Socket, detailing its features, operation, specifications, and app connectivity for temperature control.