Strymon Volante Magnetic Echo Machine Uputstvo za upotrebu

1. Uvod

The Strymon Volante is a magnetic echo machine designed to deliver a wide range of vintage delay effects. It features three distinct echo engines: Drum echo, Tape echo, and Reel-to-Reel studio echo, along with a Sound on Sound looper mode and an onboard spring reverb. This pedal is suitable for electric and acoustic guitars, synthesizers, vocals, and keyboards, offering extensive control over delay parameters and sonic characteristics.

2. Sigurnosne informacije

• Napajanje: Use only the specified 9V DC power supply with the correct polarity. Using an incorrect power supply can damage the unit and void the warranty.
• Voda i vlaga: Ne izlažite uređaj vodi ili prekomjernoj vlazi. To može uzrokovati strujni udar ili požar.
• ventilacija: Osigurajte odgovarajuću ventilaciju oko uređaja. Ne blokirajte ventilacijske otvore.
• čišćenje: Čistite uređaj mekom, suhom krpom. Ne koristite tekuća sredstva za čišćenje ili aerosole.
• servisiranje: Ne pokušavajte sami servisirati uređaj. Za sve servisne radove obratite se kvalifikovanom servisnom osoblju.

3. Sadržaj paketa

Upon opening the box, verify that the following items are included:

• Strymon Volante Magnetic Echo Machine pedal
• 9V DC Power Supply (specific to region)
• USB kabel
• Vodič za brzi početak (ovaj priručnik pruža detaljne upute)

4. Proizvod je gotovview i kontrole

The Volante pedal features a comprehensive set of controls for shaping your echo sounds. Familiarize yourself with the layout below.

Slika 4.1: Top view of the Strymon Volante pedal, showing all knobs, switches, and footswitches.

Kontrole gornje ploče:

• REC LEVEL: Adjusts the input gain for the echo signal. Higher settings introduce more saturation.
• LOW CUT: Filters out low frequencies from the echo repeats.
• MECHANICS: Controls the mechanical integrity of the virtual echo machine, affecting wow, flutter, and other imperfections.
• NOSITE: Simulates the degradation of the magnetic medium, adding warmth and character to the repeats.
• TYPE prekidač: Selects between Drum, Tape, and Studio echo engines.
• SPEED Switch: Adjusts the playback speed of the echo, affecting delay time (Half, Normal, Double).
• PONAVLJANJA: Controls the number of echo repeats.
• NIVO ECHO: Adjusts the overall volume of the echo repeats.
• PROLJEĆE: Controls the level of the onboard spring reverb.
• TIME Playback/Feedback LEDs (1-4): Indicate active playback and feedback heads.
• SPACING Switch: Adjusts the spacing between the virtual playback heads (Even, Triplet, Golden, Silver).

nožni prekidači:

• ON (Left Footswitch): Toggles the effect on/off. Hold for Reverse.
• FAVORITE (Middle Footswitch): Recalls a saved preset. Hold for Pause (in Sound on Sound mode).
• TAP (Right Footswitch): Taps in the delay tempo. Hold for Splice (in Sound on Sound mode).

Slika 4.2: Rear panel connections of the Strymon Volante, including audio inputs/outputs, expression pedal, USB, MIDI, and power input.

Priključci na stražnjoj ploči:

• INST/LINE Switch: Selects input level for instrument or line level signals.
• LEFT IN / RIGHT IN: Mono or stereo audio inputs.
• LEFT OUT / RIGHT OUT: Stereo audio outputs.
• EXP: Expression pedal input for real-time control of parameters.
• USB: USB connection for firmware updates and MIDI control.
• MIDI IN / MIDI OUT: Standard MIDI connections for advanced control and synchronization.
• 9VDC: Power input for the included 9V DC power supply.

5. Podešavanje

5.1 Priključak za napajanje

1. Ensure the Volante is switched off (if applicable) and all audio connections are made before connecting power.
2. Connect the included 9V DC power supply to the 9VDC input on the rear panel.
3. Plug the power supply into a suitable wall outlet.

5.2 Audio veze

The Volante supports both mono and stereo operation.

• Mono Setup: Povežite svoj instrument na LEFT IN jack. Connect the IZOSTAVLJEN utikač za tvoj ampgasni regulator ili sljedeća pedala.
• Stereo podešavanje: Connect your stereo source (e.g., another stereo pedal, synth) to the LEFT IN i PRAVO IN jacks. Connect the IZOSTAVLJEN i RIGHT OUT jacks to your stereo amplifier setup or audio interface.
• Ulazni nivo: Koristite INST/LINE switch to match your input signal level. Set to INST for guitar/bass, and LINE for synthesizers or effects loops.

5.3 MIDI and USB Connections (Optional)

• MIDI: Connect MIDI cables from your MIDI controller or interface to the MIDI IN i MIDI OUT jacks for advanced control, preset changes, and synchronization.
• USB: Connect a USB cable from the Volante to your computer for firmware updates and MIDI over USB functionality.

6. Uputstvo za upotrebu

6.1 Osnovni rad

1. Engage the Effect: Pritisnite ON footswitch to activate the delay effect. The LED above the footswitch will illuminate.
2. Select Echo Type: Koristite TYPE switch to choose between Drum, Tape, or Studio echo.
3. Adjust Delay Time: The delay time is primarily controlled by the TAP footswitch. Tap it two or more times to set the tempo. The BRZINA switch (Half, Normal, Double) further divides or multiplies the tapped tempo.
4. Control Repeats: Okrenite REPEATS knob to increase or decrease the number of echo repetitions.
5. Set Echo Level: Koristite ECHO LEVEL knob to blend the wet (effected) signal with your dry signal.
6. Add Spring Reverb: Podesite PROLJEĆE knob to introduce the onboard spring reverb.

6.2 Shaping the Echo Tone

• REC LEVEL: For clean echoes, keep this knob lower. Increase it to introduce natural saturation and soft clipping characteristic of magnetic media.
• LOW CUT: Use this to remove muddy low frequencies from your repeats, making them clearer and less intrusive.
• MECHANICS & WEAR: These knobs allow you to dial in the imperfections and character of vintage echo machines. Experiment with them to achieve desired vintage textures.
• PROSTOR: The PROSTOR switch alters the rhythmic relationship between the four virtual playback heads.
  • čak: Heads are equally spaced.
  • Triplet: Creates triplet-based rhythms.
  • Golden: Asymmetrical spacing for unique rhythmic patterns.
  • Srebro: Another asymmetrical spacing option.

6.3 Sound on Sound Looper Mode

The Volante features a mono Sound on Sound looper mode, inspired by classic tape looping techniques.

1. Engage Looper: Držite TAP footswitch for approximately 1 second until the LED above it flashes. This enters Sound on Sound mode.
2. Zapis: The looper automatically starts recording when engaged. Play your phrase.
3. Overdub: After the initial loop is recorded, the looper automatically enters overdub mode. Play additional layers.
4. Zaustavi/Obriši: Pritisnite ON footswitch to stop playback. Hold the ON footswitch to clear the loop.
5. pauza: In Sound on Sound mode, hold the FAVORITE footswitch to pause the loop.
6. spajanje: In Sound on Sound mode, hold the TAP footswitch to splice the loop, creating a new loop point.
7. Revers: While the loop is playing, hold the ON footswitch to reverse the loop playback.

6.4 Unaprijed zadane postavke

The Volante allows you to save and recall your favorite settings.

• Čuvanje unaprijed postavljene postavke: Once you have dialed in your desired sound, press and hold the FAVORITE footswitch until its LED flashes, then release. Your current settings are now saved to the Favorite preset.
• Pozivanje preseta: Pritisnite FAVORITE footswitch to instantly recall your saved preset.
• Napomena: The Volante supports up to 300 presets via MIDI, but only one "Favorite" preset is directly accessible via the footswitch.

7. Napredne funkcije

7.1 Expression Pedal Control

Connect a standard expression pedal to the EXP jack to control various parameters in real-time. The specific parameter controlled can be configured via secondary functions or MIDI.

7.2 MIDI Implementation

The Volante offers extensive MIDI control for integration into complex setups.

• MIDI Control Change (CC): Most knobs and switches can be controlled via MIDI CC messages.
• Promjena programa (PC): Access up to 300 presets using MIDI Program Change messages.
• MIDI Clock Sync: Synchronize the delay tempo with external MIDI clock sources.
• Refer to the full MIDI Implementation Chart available on the Strymon websajt za detaljnije informacije.

8. Održavanje

• čišćenje: Wipe the pedal with a soft, dry cloth to remove dust and grime. Avoid abrasive cleaners or solvents.
• Skladištenje: Čuvajte pedalu na hladnom i suhom mjestu, dalje od direktne sunčeve svjetlosti i ekstremnih temperatura kada se ne koristi.
• Ažuriranja firmvera: Periodically check the Strymon website for firmware updates. Updates can introduce new features or improve performance. Use the USB connection and the Strymon Updater software to perform updates.

9. Otkrivanje problema

10. Specifikacije

11. Garancija i podrška

11.1 Informacije o garanciji

Strymon products are designed and built to high standards. For detailed warranty information, including coverage period and terms, please refer to the official Strymon webweb-mjesto ili kontaktirajte njihovu korisničku podršku. Sačuvajte dokaz o kupovini za slučaj reklamacije.

11.2 Korisnička podrška

If you encounter any issues not covered in this manual or require further assistance, please visit the official Strymon support page or contact their customer service team. You can typically find contact information and FAQs on the Strymon website.

Strymon Webstranica: www.strymon.net