1. Uvod i pregled proizvodaview
Thank you for choosing the Stayer Professional Telescopic Miter Saw SCR 315 W. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new tool. Please read this manual thoroughly before initial use and keep it for future reference.
This powerful 1800W miter saw is designed for precision cutting with a large capacity, capable of cutting materials up to 370 mm in length and 120 mm in height. Its belt-driven transmission significantly reduces noise and improves work quality. The robust yet lightweight aluminum base ensures stability and durability.
Slika 1.1: Gotovoview of the Stayer Professional Telescopic Miter Saw SCR 315 W.
2. Sigurnosna uputstva
Uvijek se pridržavajte osnovnih sigurnosnih mjera opreza kako biste smanjili rizik od požara, strujnog udara i tjelesnih ozljeda. Držite ovaj priručnik pri ruci za brzo korištenje.
Opća sigurnosna pravila:
- Uvijek nosite odgovarajuću ličnu zaštitnu opremu (LZO), uključujući zaštitne naočale, zaštitu za sluh i masku za prašinu.
- Osigurajte da je radni prostor čist, dobro osvijetljen i bez prepreka.
- Držite podalje djecu i osobe u blizini dok radite s testerom.
- Nemojte koristiti električne alate u eksplozivnoj atmosferi, kao što je prisustvo zapaljivih tečnosti, gasova ili prašine.
- Secure the workpiece firmly before cutting. Never hold small pieces by hand.
- Ensure the blade guard is always in place and functioning correctly.
- Isključite pilu iz izvora napajanja prije bilo kakvih podešavanja, promjene pribora ili održavanja.
- Use only sharp, clean blades of the correct size and type for the material being cut.
- Avoid awkward hand positions. Always maintain proper footing and balance.
3. Components and Key Features
Familiarize yourself with the various parts of your miter saw to ensure safe and effective operation.
Image 3.1: Labeled diagram of the miter saw components.
- Transportna ručka: For safe and easy carrying of the saw.
- Belt Motor: 1800W motor with belt transmission for quiet and efficient operation.
- Telescopic Rail: Allows for extended cutting capacity up to 370mm.
- Vertical Clamp: Secures the workpiece for stable cutting.
- Tilting Head: Adjustable from -45° to +45° for bevel cuts in both directions.
- Extendable Support: Provides additional support for longer workpieces.
- Adjustable Rotary Table: Allows for precise miter angle adjustments (0°/22.5°/45°).
- gumene noge: Ensures stability and reduces vibration during operation.
- Laserski vodič: Provides a precise cutting line for improved accuracy.
Image 3.2: Additional features and technical data overview.
4. Podešavanje
Although the saw comes largely pre-assembled, some setup is required before first use.
Raspakivanje i postavljanje:
- Pažljivo izvadite pilu i sav pribor iz ambalaže.
- Inspect the saw for any shipping damage. Do not operate if damaged.
- Place the saw on a stable, level workbench or stand that can support its weight (approx. 19 kg) and the workpiece. Ensure sufficient space around the saw for safe operation and material handling.
- Ensure the rubber feet are securely positioned to prevent movement.
Početne prilagodbe:
- Verify that all locking mechanisms for the miter table, bevel head, and telescopic rail are functioning correctly.
- Check the alignment of the blade with the miter scale and laser guide. Adjust if necessary according to the calibration section (if applicable in a detailed manual).
- Connect the saw to a suitable power outlet (220V AC).
Slika 4.1: View of the miter table and fence, ready for setup.
5. Uputstvo za upotrebu
Slijedite ove korake za siguran i efikasan rad vaše ugaone pile.
Basic Cutting Procedure:
- Pripremite radni komad: Označite željenu liniju rezanja na materijalu.
- Prilagodite postavke: Set the desired miter angle on the rotary table and the bevel angle on the tilting head. Secure all locking levers.
- Položaj obratka: Place the workpiece firmly against the fence and the saw table. Use the vertical clamp to secure it. Ensure the material is fully supported, using the extendable supports if needed.
- Align Cut: Lower the saw head slightly (without starting the motor) to align the blade with your marked cut line. Use the laser guide for precise alignment.
- Početak pile: Ensure your hands are clear of the blade path. Press the power switch to start the motor. Allow the blade to reach full speed before beginning the cut.
- Make Cut: Slowly and steadily lower the saw head through the workpiece. For telescopic cuts, push the saw head forward along the rail as you cut.
- Potpuni rez: Nakon što je rez završen, otpustite prekidač za napajanje i pričekajte da se list pile potpuno zaustavi prije nego što podignete glavu pile.
- Uklonite radni komad: Carefully remove the cut material and any off-cuts.
Image 5.1: The miter saw in action, demonstrating a cut.
Slika 5.2: Krupni plan view of the cutting process, showing the laser guide.
6. Održavanje
Redovno održavanje osigurava dugotrajnost i optimalne performanse vaše ugaone pile.
čišćenje:
- After each use, disconnect the saw from power and clean off sawdust and debris using a brush or vacuum cleaner.
- Pay special attention to the blade guard, miter scale, and telescopic rails to ensure smooth operation.
- The dust collection system is designed to minimize sawdust, but regular cleaning of the dust bag/port is essential.
Održavanje i zamjena oštrica:
- Regularly inspect the saw blade for sharpness, cracks, or missing teeth. A dull blade can cause kickback and poor cut quality.
- When replacing the blade, ensure the saw is unplugged. Follow the instructions in your saw's specific blade replacement guide. Use only blades with a 315mm diameter and appropriate arbor size.
Pregled remena:
- Periodically inspect the drive belt for wear, cracks, or slippage. A worn belt can affect performance and increase noise.
- Refer to the service manual for instructions on belt replacement if necessary.
Image 6.1: Close-up of the blade and guard, important for maintenance checks.
7. Otkrivanje problema
Ovaj odjeljak se bavi uobičajenim problemima s kojima se možete susresti pri korištenju ugaone pile.
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Testera se ne pokreće | No power, faulty switch, motor issue | Check power connection, circuit breaker. If problem persists, contact service. |
| Loš kvalitet reza (grub, cijepanje) | Dull blade, incorrect blade for material, improper feed rate, workpiece not secure | Replace or sharpen blade. Use appropriate blade. Adjust feed rate. Secure workpiece firmly. |
| Prekomjerne vibracije ili buka | Loose blade, worn belt, damaged bearings, unstable setup | Check blade tightness. Inspect belt for wear. Ensure saw is on a stable surface. If severe, seek professional service. |
| Laser guide not accurate | Misalignment, dirty laser lens | Clean laser lens. Refer to specific instructions for laser calibration (if available). |
| Uklanjanje prašine je neefikasno | Dust bag full, clogged port, improper connection | Empty dust bag. Clear any clogs in the dust port. Ensure connections are secure. |
| Play/wobble in saw head or table | Loose components, manufacturing defect | Check for any accessible tightening points. If significant play affects accuracy or safety, contact customer support. |
If you encounter problems not listed here or if solutions do not resolve the issue, please contact Stayer customer support.
8. Tehničke specifikacije
Detailed specifications for the Stayer Professional Telescopic Miter Saw SCR 315 W.
| Specifikacija | Vrijednost |
|---|---|
| Broj modela | 1.1933 |
| Proizvođač | STAYER |
| Izvor napajanja | Corded Electric |
| Voltage | 220 volti (AC) |
| Snaga | 1800 Watts |
| Brzina | 3500 RPM |
| Materijal oštrice | Aluminum Oxide (typical for general purpose blades) |
| Posebna karakteristika | Silent (Belt Drive) |
| Težina artikla | 19 kilograma |
| Dimenzije paketa | 95 x 55 x 55 cm |
| Cutting Capacity (Length) | Do 370 mm |
| Kapacitet rezanja (visina) | Do 120 mm |
9. Garancija i podrška
For warranty information, please refer to the warranty card or documentation included with your purchase. Warranty terms and conditions may vary by region and retailer.
If you require technical assistance, spare parts, or have questions regarding the operation or maintenance of your Stayer Professional Telescopic Miter Saw, please contact Stayer customer support or your authorized dealer. Have your model number (1.1933) and purchase details ready when contacting support.
