Korisnički priručnik za Cisco ASR1002-X ruter za usluge agregacije

1. Uvod i krajview

This manual provides essential information for the installation, operation, and maintenance of the Cisco ASR1002-X Aggregation Services Router. The ASR1002-X is designed for enterprise and service provider edge deployments, offering high performance, reliability, and advanced services for network aggregation.

This document is intended for network administrators, IT professionals, and anyone responsible for deploying or managing the Cisco ASR1002-X router.

2. Sigurnosne informacije

Pridržavajte se sljedećih sigurnosnih mjera opreza kako biste spriječili ozljede i oštećenje opreme:

• Snaga: Ensure the router is connected to a properly grounded power source. Use only the power cords supplied or approved by Cisco.
• ventilacija: Maintain adequate airflow around the router. Do not block ventilation openings.
• Rukovanje: The router is heavy (approximately 39.3 pounds). Use proper lifting techniques or assistance when moving or installing the unit.
• Okruženje: Operate the router within the specified temperature and humidity ranges (e.g., upper temperature rating of 40 degrees Celsius).
• Elektrostatičko pražnjenje (ESD): Always use an ESD-preventive wrist strap when handling internal components to prevent damage.

3. Komponente i karakteristike proizvoda

The Cisco ASR1002-X is a compact, rack-mountable router designed for high-performance networking. Key features include multiple Gigabit Ethernet ports, a dedicated management port, and expansion slots for network interface modules.

Slika 1: Pozadi view of the Cisco ASR1002-X Aggregation Services Router. This image displays the rear panel of the Cisco ASR1002-X router. Visible components include multiple RJ45 Ethernet ports, SFP/SFP+ slots, a console port, and two large module bays for network interface modules or other expansion cards. The design emphasizes ventilation for optimal performance.

3.1 Indikatori na prednjoj ploči

The front panel typically includes LED indicators for system status, power, and port activity. Refer to the detailed product documentation for specific LED behavior and meanings.

3.2 Rear Panel Ports and Slots

The rear panel provides connectivity options:

• Ethernet portovi: Multiple RJ45 Gigabit Ethernet ports for data connectivity.
• Port za upravljanje: A dedicated RJ45 port for out-of-band management.
• Konzolni port: For initial configuration and direct access to the command-line interface (CLI).
• USB portovi: For software upgrades or configuration backup.
• Slotovi za module: Bays for installing Network Interface Modules (NIMs) or other expansion cards to customize connectivity and services.

4. Postavljanje i instalacija

4.1 Raspakivanje i pregled

1. Carefully unpack the router and its accessories from the shipping carton.
2. Inspect all components for any signs of physical damage. Report any damage to your supplier immediately.
3. Provjerite da li su prisutni svi artikli navedeni na listi za pakovanje.

4.2 Montaža u stalak

The ASR1002-X is a 2U rack-mountable device. Follow these general steps for rack installation:

1. Attach the provided rack-mount brackets to the sides of the router using the supplied screws.
2. Align the router with the desired rack unit spaces in a standard 19-inch equipment rack.
3. Secure the router to the rack using appropriate rack screws. Ensure it is firmly seated and level.

4.3 Priključak za napajanje

1. Connect the power cord(s) to the power supply module(s) at the rear of the router.
2. Plug the other end of the power cord(s) into a grounded AC power outlet. The router supports 240 Volts AC input.
3. Ensure the power switch (if present) is in the 'ON' position. The power LED on the front panel should illuminate.

4.4 Initial Network Connections

1. Konzola konekcija: For initial configuration, connect a console cable from your management workstation to the router's console port. Use a terminal emulation program (e.g., PuTTY, Tera Term) with appropriate settings (typically 9600 baud, 8 data bits, no parity, 1 stop bit, no flow control).
2. Port za upravljanje: Connect an Ethernet cable from the dedicated management port to your management network for out-of-band access.
3. Portovi za podatke: Connect network cables to the Gigabit Ethernet data ports as required by your network topology.

5. Uputstvo za upotrebu

The Cisco ASR1002-X router operates on Cisco IOS XE software. Configuration and management are primarily performed via the Command-Line Interface (CLI) accessed through the console port or SSH/Telnet via the management or data ports.

5.1 Osnovna konfiguracija

Upon initial boot, the router may enter a setup dialog. It is generally recommended to decline the initial setup dialog and configure the router manually via the CLI for precise control.

• Ime hosta: Configure a unique hostname for the router.
• IP adrese: Assign IP addresses to interfaces as per your network design.
• Korisnički nalozi: Create local user accounts with appropriate privilege levels.
• Protokoli rutiranja: Configure necessary routing protocols (e.g., OSPF, EIGRP, BGP) to enable network communication.
• sigurnost: Implement security measures such as access control lists (ACLs), SSH for secure remote access, and disable unnecessary services.

For detailed configuration procedures, refer to the official Cisco IOS XE documentation specific to the ASR1000 series.

5.2 Monitoring Router Status

Use various CLI commands to monitor the router's operational status:

• show version: Displays software version and hardware information.
• show interface: Shows status and statistics for all interfaces.
• show ip route: Displays the routing table.
• show processes cpu: Monitors CPU utilization.
• show environment: Provides information on power supplies, fans, and temperature.

6. Održavanje

Regular maintenance ensures the longevity and optimal performance of your Cisco ASR1002-X router.

• Kontrola okoline: Osigurajte da radno okruženje ostane unutar specificiranih granica temperature i vlažnosti.
• čišćenje: Periodically clean the exterior of the router and ventilation openings with a soft, dry cloth to prevent dust buildup. Do not use liquid cleaners directly on the device.
• Ažuriranja softvera: Keep the Cisco IOS XE software updated to the latest stable release to benefit from new features, security patches, and bug fixes. Refer to Cisco's official webstranica za postupke ažuriranja.
• Sigurnosna kopija konfiguracije: Regularly back up your router's configuration to an external server or USB device.
• Inspekcija hardvera: Periodically inspect cables and connections for wear or damage.

7. Otkrivanje problema

Ovaj odjeljak pruža osnovne korake za rješavanje uobičajenih problema.

7.1 Problemi s napajanjem

• Nema napajanja: Verify power cord connections, check the power outlet, and ensure the power switch is on. Check the power supply LEDs.
• System LED Error: Consult the Cisco documentation for the specific meaning of error codes or LED patterns.

7.2 Problemi s povezivanjem

• Interface Down: Check cable connections, verify interface configuration (no shutdown command), and check link status LEDs.
• No IP Connectivity: Verify IP address configuration, subnet mask, default gateway, and routing table entries. Use ping i traceroute commands for diagnostics.
• Console Access Failure: Ensure correct console cable connection and terminal emulation settings.

For advanced troubleshooting, refer to Cisco's official support resources and documentation.

8. Specifikacije

The following table details the technical specifications for the Cisco ASR1002-X Aggregation Services Router:

9. Garancija i podrška

This Cisco ASR1002-X router is a renewed product. Renewed products are typically inspected and tested to work and look like new by Amazon-qualified suppliers. If not satisfied with the purchase, renewed products are generally eligible for replacement or refund under the Amazon Renewed Guarantee.

For specific warranty details and return policies, please refer to the terms and conditions provided by the reseller (e.g., Network Hardware Depot) or the Amazon Renewed program at the time of purchase.

For technical support, configuration assistance, or advanced troubleshooting, it is recommended to consult Cisco's official documentation and support resources, or contact your certified Cisco partner or reseller.