Seiko QGP216W

Seiko QGP216W Space Link Wall Clock

Uputstvo za upotrebu

Uvod

Thank you for choosing the Seiko QGP216W Space Link Wall Clock. This manual provides essential information for the proper setup, operation, and maintenance of your new clock. Please read these instructions carefully before use and retain them for future reference.

Sigurnosne informacije

  • Držite sat dalje od direktne sunčeve svjetlosti, ekstremnih temperatura i visoke vlažnosti.
  • Avoid placing the clock near strong magnetic fields, which can affect timekeeping accuracy.
  • Ne pokušavajte sami rastavljati ili popravljati sat. Za sve servisne radove obratite se kvalifikovanom osoblju.
  • Istrošene baterije odlažite odgovorno u skladu sa lokalnim propisima.
  • Držite baterije van domašaja dece. Ako se proguta, odmah potražite medicinsku pomoć.

Sadržaj paketa

Provjerite da li su sve stavke prisutne u paketu:

  • Seiko QGP216W Space Link Wall Clock
  • Uputstvo za upotrebu (ovaj dokument)

Napomena: Baterije obično nisu uključene i moraju se kupiti zasebno.

Setup

1. Raspakivanje

Carefully remove the clock from its packaging. Inspect for any signs of damage. Retain packaging materials for future transport or storage if needed.

2. Instalacija baterije

The Seiko QGP216W Wall Clock requires one (1) AA battery (not included).

  1. Pronađite odeljak za baterije na poleđini sata.
  2. Otvorite poklopac odeljka za baterije.
  3. Insert one (1) fresh AA battery, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
  4. Čvrsto zatvorite poklopac odeljka za baterije.
Seiko QGP216W Space Link Wall Clock front view, illustrating the product for context of battery compartment location on the back.

Image: The Seiko QGP216W Space Link Wall Clock. The battery compartment and time setting knob are located on the back of the clock.

3. Postavljanje vremena

  1. Locate the time setting knob on the back of the clock, usually near the battery compartment.
  2. Gently turn the knob in either direction to move the clock hands to the correct time.
  3. Ensure the hands are not obstructed and move freely.

4. Montaža sata

The clock is designed for indoor wall mounting.

  1. Choose a suitable location on a wall, ensuring it is sturdy enough to support the clock's weight (approximately 1.62 kg).
  2. Use an appropriate wall anchor and screw (not included) for secure mounting.
  3. Hang the clock using the keyhole slot located on the back.
Seiko QGP216W Space Link Wall Clock front view mounted on a wall

Image: The Seiko QGP216W Space Link Wall Clock displayed on a wall, illustrating its appearance in a typical setting.

Operating

Once the battery is installed and the time is set, the Seiko QGP216W Wall Clock will begin operating automatically. Its silent movement ensures a quiet environment.

  • Merenje vremena: The clock continuously displays the current time using its analog hands.
  • Tihi rad: This clock features a silent sweep movement, eliminating ticking sounds.

Održavanje

Čišćenje

Za čišćenje sata, nježno obrišite površinu mekom, suhom krpom. Nemojte koristiti abrazivna sredstva za čišćenje, rastvarače ili hemijske sprejeve, jer oni mogu oštetiti završnu obradu.

Zamjena baterije

When the clock hands begin to slow down or stop, it is time to replace the battery. Follow the "Battery Installation" steps in the Setup section to replace the AA battery.

Skladištenje

If the clock will not be used for an extended period, remove the battery to prevent leakage and potential damage to the movement.

Rješavanje problema

ProblemMogući uzrokRješenje
Kazaljke sata se ne pomjeraju.Prazna ili nepravilno instalirana baterija.Replace the battery with a fresh AA battery, ensuring correct polarity (+/-).
Clock runs slow or fast.Weak battery; clock exposed to extreme temperatures or strong magnetic fields.Replace the battery. Relocate the clock away from heat sources, cold drafts, or electronic devices.
Hands are stuck or obstructed.Fizička prepreka ili oštećenje.Gently check if anything is blocking the hands. If damage is apparent, contact customer support.

Specifikacije

  • Model: QGP216W
  • Brand: Seiko
  • Vrsta prikaza: Analog
  • Kretanje: Silent Sweep
  • Izvor napajanja: 1 x AA baterije (nisu uključene)
  • Materijal: Plastika
  • Dimenzije (D x Š x V): 33.5 x 4.7 x 4.7 cm (13.2 x 1.85 x 1.85 inča)
  • Težina: 1.62 kilograma (3.57 lbs)
  • Namjena: Indoor
  • Oblik: Okrugli

Garancija i podrška

For warranty information or technical support, please refer to the warranty card included with your purchase or visit the official Seiko webstranica. Također se možete obratiti svom prodavaču za pomoć.

Povezani dokumenti - QGP216W

Preview Seiko QHL095-W Uputstvo za upotrebu sata - Uputstvo za podešavanje i upotrebu
Sveobuhvatni vodič za Seiko QHL095-W sat, koji obuhvata podešavanje vremena i alarma, rad, održavanje i rješavanje problema. Osigurajte optimalne performanse vašeg Seiko sata.
Preview Ograničeni jednogodišnji garancijski certifikat za Seiko satove
Ovaj dokument opisuje uslove i odredbe za ograničenu jednogodišnju garanciju za Seiko satove, uključujući pokrivenost, ograničenja i postupke za dobijanje garantne usluge.
Preview Seiko digitalni sat - uputstvo za upotrebu
Sveobuhvatno uputstvo za upotrebu Seiko digitalnog sata, koje obuhvata podešavanje vremena, funkcije alarma, prikaz temperature i ljetno računanje vremena (DST).
Preview Seiko R-Wave XR131-1 Radio-Controlled Clock Instructions
Official instructions for the Seiko R-Wave XR131-1 radio-controlled clock. Learn how it works, setup, time zone settings, automatic and manual time setting, DST, and specifications.
Preview Uputstvo za upotrebu Seiko Melody sata
Uputstvo za upotrebu za Seiko Melody Clock, detaljno podešavanje, podešavanje vremena i jačine zvuka, odabir melodije, demonstracioni način rada, funkcionalnost senzora svjetla i informacije o trajanju baterije.
Preview SEIKO Cal. 7T04 Analog Quartz Watch Instructions
Detailed instructions for the SEIKO Cal. 7T04 Analog Quartz Watch, covering time setting, stopwatch operation, date setting, battery replacement, tachymeter, telemeter, and specifications.