1. Uvod
This manual provides essential instructions for the safe and efficient use of your Herdio 4 Inch 200 Watt Outdoor Indoor Bluetooth Speakers, Model HOS-401WBT. Please read this manual thoroughly before installation and operation to ensure optimal performance and longevity of your speakers.
2. Sadržaj paketa
Provjerite da li se u vašem paketu nalaze sve dolje navedene stavke:
- 2 x Herdio 4 Inch Speakers (1 Active, 1 Passive)
- 1 x 12V Power Adapter and Supply
- 1 x 16FT/5M Speaker Cable
- 1 x Uputstvo za upotrebu
- Montažni nosači i vijci
3. Specifikacije
| Feature | Detalj |
|---|---|
| Naziv modela | HOS-401WBT |
| Vrsta zvučnika | Vanjski / Indoor |
| Izlazna snaga | 200 Watts (100W per speaker) |
| Woofer Diameter | 4 inča |
| Prečnik visokotonca | 1 inča |
| Povezivanje | Bluetooth, Wired (Passive speaker connection) |
| Bluetooth domet | Do 20.12 metara (66 stope) |
| Nivo vodootpornosti | IP66 (Vodootporan) |
| Materijal | akrilonitril butadien stiren (ABS) |
| Dimenzije proizvoda (D x Š x V) | 8.62" x 5.67" x 6.62" (219 mm x 144 mm x 159 mm) |
| Ulazni voltage | 12 Volts |
| Način audio izlaza | Stereo |
4. Podešavanje
4.1 Montiranje zvučnika
The Herdio speakers come with versatile swivel brackets for flexible placement. These brackets allow for a 90-120 degree range of motion, enabling you to direct sound as desired.
- Uklonite zagrade: Unscrew the knobs on the sides of the speakers to detach the mounting brackets.
- Postavljanje oznake: Choose your desired location (e.g., patio, garage, living room wall). Use the detached bracket to mark the drill points for the screws.
- Ugradnja nosača: Securely attach the brackets to the wall or ceiling using appropriate screws (provided).
- Priključite zvučnike: Slide the speakers onto the installed brackets. Adjust the speaker angle and tighten the knobs to secure them in place.
4.2 Ožičenje zvučnika
The Herdio speaker system consists of one active speaker and one passive speaker. The active speaker contains the amplifier and Bluetooth module, while the passive speaker connects to the active one via the provided speaker cable.
- Connect Passive to Active: Locate the red (+) and black (-) terminals on the back of both speakers. Connect the red wire of the speaker cable to the red terminal on both speakers, and the black wire to the black terminal on both speakers. Ensure a secure connection by turning the terminal clockwise to tighten.
- Priključak za napajanje: Plug the 12V power adapter into the DC 12V input port on the active speaker. Then, plug the power adapter into a suitable electrical outlet.
5. Operacija
5.1 Bluetooth uparivanje
Once powered on, the active speaker will automatically enter Bluetooth pairing mode. The Bluetooth indicator light will flash, indicating it's ready to connect.
- Aktivirajte Bluetooth: Na pametnom telefonu ili tabletu omogućite Bluetooth.
- Traži uređaj: Look for "HOS-401WBT" in the list of available Bluetooth devices.
- Povežite se: Select "HOS-401WBT" to pair. A confirmation tone will sound from the speakers once successfully connected.
5.2 Audio reprodukcija
After successful pairing, you can play audio from your connected device. The speakers will output stereo sound.
- Kontrola jačine zvuka: Podesite jačinu zvuka direktno sa povezanog uređaja.
- Kvalitet zvuka: The speakers are designed to deliver full-range sound with deep bass and clear highs.
6. Održavanje
- čišćenje: Use a soft, dry cloth to clean the speaker surfaces. Avoid abrasive cleaners or solvents.
- Zaštita od vremenskih prilika: Although IP66 rated, it is recommended to protect the power adapter from direct exposure to rain or extreme weather conditions.
- Skladištenje: Ako zvučnike skladištite duži period, isključite ih iz napajanja i čuvajte ih na hladnom i suhom mjestu.
7. Otkrivanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Nema struje | Adapter za napajanje nije priključen ili je utičnica neispravna. | Ensure the power adapter is securely plugged into the active speaker and a working electrical outlet. |
| Nema zvuka | Speakers not paired, volume too low, or incorrect wiring. | Verify Bluetooth connection, increase device volume, and check speaker cable connections between active and passive speakers. |
| Bluetooth prekid veze | Device out of range or interference. | Ensure the paired device is within 20 meters (66 feet) of the active speaker. Minimize obstacles and interference. |
| Izobličen zvuk | Volume too high or poor audio source. | Reduce the volume on your device. Try a different audio source or file. |
8. Garancija i podrška
All Herdio speaker products come with a 1-godišnja ograničena garancija against defects in materials and workmanship. Proof of purchase is required for all claims.
During the warranty period, Herdio will replace any defective part and correct any defect in workmanship without charge for either parts or labor.
The Technical Support Center at HERDIO is available from Monday to Friday, excluding holidays.
Za pitanja ili podršku, molimo kontaktirajte nas na: support@herdiotech.com
