ONETWOFIT Dual Bike Floor Stand

Uvod

Thank you for choosing the ONETWOFIT Dual Bike Floor Stand. This manual provides essential information for the safe assembly, operation, and maintenance of your new bike stand. Please read these instructions carefully before use and retain them for future reference.

This durable steel bike stand is designed to securely hold two bicycles, offering a convenient and space-saving storage solution for your home, garage, or apartment. It features a powder-coated finish for rust resistance and non-slip sleeves for floor protection.

Slika 1: Karakteristike proizvoda - Highlighting the anti-corrosion paint, non-slip bottom sleeves, and heavy-duty tubular steel construction.

Sigurnosne informacije

• Ensure all bolts are securely tightened before placing bicycles in the stand.
• Ne prekoračujte maksimalnu nosivost stalka.
• Postavite postolje na ravnu, stabilnu površinu kako biste spriječili prevrtanje.
• Keep children and pets away from the stand during assembly and when bikes are stored.
• Redovno provjeravajte postolje na znakove habanja ili oštećenja. Ne koristite ga ako je oštećeno.

Sadržaj paketa

Provjerite da li se u vašem paketu nalaze sve dolje navedene komponente. Ako bilo koji dijelovi nedostaju ili su oštećeni, obratite se korisničkoj podršci.

Slika 2: Sadržaj paketa - This image displays all parts included: (1) Square Tube, (2) Tubular Legs, (3) Wheel Support, (4) Upright Tubes, (5) Cross-piece, (6) Hex Head Bolts, (7) Curved Washers, and (8) Long Metal Screws.

1. Square Tube (1 komad)
2. Tubular Legs (2 komada)
3. Podrška na točkovima (1 komad)
4. Uspravne cijevi (4 komada)
5. Poprečni komad (1 komad)
6. Vijci sa šesterokutnom glavom (Quantity as needed for assembly)
7. Curved Washers (Quantity as needed for assembly)
8. Long Metal Screws (Quantity as needed for assembly)

Note: Tools required for assembly (not included): 10mm wrench or socket, 4.5mm Allen wrench.

Uputstva za sastavljanje

Follow these steps to assemble your ONETWOFIT Dual Bike Floor Stand. Refer to Figure 3 for visual guidance.

Slika 3: Koraci instalacije - Visual guide for assembling the bike stand.

1. Korak 1: Sastavite bazu
   Attach the Square Tube (1) to the two Tubular Legs (2). Secure them using the Hex Head Bolts (6) and Curved Washers (7). Ensure the non-slip sleeves on the Tubular Legs are facing downwards.
2. Step 2: Attach Wheel Supports and Upright Tubes
   Insert the Wheel Support (3) and the four Upright Tubes (4) into the designated slots on the assembled base. The Wheel Support should be positioned in the center, and the Upright Tubes on either side. Secure these components using the Long Metal Screws (8).
3. Step 3: Install the Cross-piece
   Attach the Cross-piece (5) between the two central Upright Tubes. This piece provides additional stability. Secure it with the remaining Long Metal Screws (8).
4. Korak 4: Završno zatezanje
   Once all components are in place, carefully tighten all bolts and screws. Do not overtighten, as this may warp the metal frame. Ensure the stand is stable and does not wobble.

Tip: If screw holes do not align perfectly, slightly loosen adjacent bolts, adjust the components, and then re-tighten.

Uputstvo za upotrebu

The ONETWOFIT Dual Bike Floor Stand is designed for easy and convenient bicycle storage.

Storing Bicycles

1. Position the bike stand on a flat, stable surface in your desired storage location (e.g., garage, living room, bedroom).
2. Roll your bicycle into one of the designated slots. The stand is designed to hold the bike upright by its wheel.
3. For a second bicycle, roll it into the adjacent slot. You can store bikes facing the same direction or opposite directions, depending on your space and preference.

Figure 4: Secure Bike Storage - A bicycle stored upright in the stand.

Slika 5: Opcije dvostrukog skladištenja - Bicycles can be stored in the same or opposite directions.

Figure 6: Versatile Storage Locations - The stand is suitable for various indoor environments.

Figure 7: Ease of Use - The stand is designed for easy use by both children and adults.

Kompatibilnost

The stand is suitable for most bicycle tires, with a maximum tire size of 26 inches and a width of 2.5 inches. It may not be suitable for commuter bikes or bikes with larger or wider tires.

Održavanje

To ensure the longevity and optimal performance of your bike stand, follow these simple maintenance guidelines:

• Redovno čišćenje: Obrišite štand oglasomamp krpom za uklanjanje prašine i prljavštine. Izbjegavajte abrazivna sredstva za čišćenje koja bi mogla oštetiti praškasto premazani premaz.
• Pregledajte ima li oštećenja: Periodically check all components for any signs of wear, rust, or damage. Pay close attention to welds and connection points.
• Zategnite pričvršćivače: Re-tighten all bolts and screws periodically to ensure the stand remains stable and secure.
• Zaštita poda: Ensure the non-slip bottom sleeves are intact to protect your flooring. Replace if worn or damaged.

Rješavanje problema

Specifikacije

Slika 8: Dimenzije proizvoda - Key measurements of the ONETWOFIT Dual Bike Floor Stand.

• Model: OT064101
• Materijal: legirani čelik
• Boja: Crna
• Dimenzije proizvoda (D x Š x V): 21.3" x 23.6" x 22.4" (54 cm x 60 cm x 57 cm)
• Težina artikla: 9.46 lbs (4.3 kg)
• Kapacitet: 2 bicikla
• Max Tire Diameter: 26 inča
• Maksimalna širina gume: 2.5 inča
• Potrebna montaža: Da
• Vrsta montaže: Podni nosač
• Posebna karakteristika: Portable, Powder Coated, Anti-corrosion

Garancija i podrška

ONETWOFIT products are designed for quality and durability. For specific warranty information, please refer to the documentation included with your purchase or visit the official ONETWOFIT website. If you encounter any issues or have questions regarding your Dual Bike Floor Stand, please contact ONETWOFIT customer support.

Kontakt informacije:

• Prodavnica robne marke: Visit the ONETWOFIT Store on Amazon
• Online podrška: Refer to the ONETWOFIT official webweb mjesto za kontakt detalje.