Stelpro pulsair RWF0502W Uputstvo za upotrebu zidnog grijača s ventilatorom

Važna sigurnosna uputstva

Read all instructions before installing or using this heater. Failure to follow these instructions may result in fire, electric shock, serious injury, or death.

• Električni priključak: This heater operates on 240 Volts. All wiring must be performed by a qualified electrician and comply with national and local electrical codes.
• uzemljenje: Ovaj grijač mora biti uzemljen.
• Lokacija: Do not install the heater near flammable materials, in areas where gasoline, paint, or other flammable liquids are stored, or where explosive dust is present. Maintain minimum clearances from walls and other objects as specified in the installation section.
• Nadzor: Neophodan je pažljiv nadzor kada bilo koji grijač koriste djeca ili invalidi ili u njihovoj blizini, te kad god se grijač ostavi uključen i bez nadzora.
• pregrijavanje: To avoid overheating, do not cover the heater. Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
• Održavanje: Isključite napajanje na glavnoj servisnoj ploči prije bilo kakvog održavanja ili čišćenja.
• Termostat: A separate thermostat is required for operation and is sold separately. Ensure the thermostat is compatible with a fan-forced heater.

Product Overview

The Stelpro pulsair RWF0502W is a 240V wall-mounted fan heater designed for supplemental heating in various rooms such as bedrooms, home offices, and living rooms. It utilizes both convection and forced air heating methods to efficiently distribute warmth.

Front view of the Stelpro pulsair RWF0502W wall fan heater, showing the fan grille and lower air outlet.

Diagram showing the dimensions of the Stelpro pulsair RWF0502W wall fan heater: 17 1/8 inches (435 mm) height, 8 11/16 inches (220 mm) width, and 3 3/16 inches (80 mm) depth.

Instalacija

Kontrolna lista prije instalacije:

• Provjerite je li napajanje isključeno na glavnom prekidaču.
• Proverite da li je zaliha voltage matches the heater's rating (240V).
• Confirm you have a compatible wall thermostat (sold separately).
• Gather necessary tools: screwdriver, wire strippers, drill, level, measuring tape.

Opcije montaže:

The RWF0502W heater can be either surface-mounted directly to the wall or recessed into the wall for a flush finish. Ensure adequate clearance from floors, ceilings, and adjacent walls as per local codes and manufacturer recommendations.

The Stelpro pulsair RWF0502W wall fan heater installed in a modern entryway, positioned below a plant and mirror.

The Stelpro pulsair RWF0502W wall fan heater installed on a blue wall in an entryway, with coats and shoes nearby.

Električni priključak:

This heater requires a 240V hardwired connection. Follow the wiring diagram provided and ensure all connections are secure and properly insulated. Connect the heater to a dedicated circuit protected by the appropriate circuit breaker.

Diagram illustrating the 240V hardwired connection for the Stelpro pulsair RWF0502W wall fan heater, showing wires connecting within a junction box.

1. Turn off power at the main electrical panel.
2. Remove the front grille of the heater to access the wiring compartment.
3. Connect the supply wires to the heater's terminals according to the wiring diagram. Ensure proper grounding.
4. Secure all connections with wire nuts and ensure no bare wires are exposed.
5. Reattach the front grille.
6. Install the external wall thermostat according to its manufacturer's instructions.

Operacija

The Stelpro pulsair RWF0502W heater is controlled by an external wall thermostat (not included). Once installed and wired correctly, follow these steps:

1. Uključeno: Restore power to the heater circuit at the main electrical panel.
2. Postavka termostata: Adjust the external thermostat to your desired temperature. The heater will activate when the room temperature falls below the set point.
3. Početna operacija: During the first few minutes of operation, the heater may emit a slight odor due to the burning off of manufacturing residues. This is normal and will dissipate quickly.
4. Raspon temperature: The heater is designed to operate within a temperature range of 5°C (41°F) to 30°C (86°F).

For optimal performance, avoid placing furniture or other obstructions directly in front of the heater's air outlets.

Održavanje

Regular maintenance ensures efficient and safe operation of your Stelpro pulsair heater. Always disconnect power at the main circuit breaker before performing any maintenance.

• čišćenje:
  • Obrišite vanjski dio grijača mekom,amp tkanina. Nemojte koristiti abrazivna sredstva za čišćenje ili rastvarače.
  • Povremeno usisavajte rešetke za usis i izlaz zraka kako biste uklonili prašinu i nakupine dlačica.
• inspekcija: Annually inspect the heater for any signs of damage, loose connections, or unusual wear. If any issues are found, contact a qualified electrician for repair.
• Bez podmazivanja: Motor je trajno podmazan i ne zahtijeva dodatno podmazivanje.

Rješavanje problema

If your Stelpro pulsair heater is not operating correctly, consult the following table before contacting customer support.

Specifikacije

Garancija

Stelpro products are manufactured to high standards and are covered by a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Stelpro webSačuvajte dokaz o kupovini za slučaj reklamacije.

Korisnička podrška

For technical assistance, replacement parts, or further inquiries, please contact Stelpro customer service. Contact information can typically be found on the product packaging, the official Stelpro website, or by referring to the documentation included with your purchase.

Note: Always provide your product model number (RWF0502W) when contacting support.