Antec Dark Avenger DA601 E-ATX Mid Tower kućište - uputstvo za upotrebu

1. Uvod

1.1 About Your Antec DA601 Case

The Antec Dark Avenger DA601 is an E-ATX mid-tower PC case designed for high-performance gaming systems. It features an ARGB front panel with integrated LED strips, a tempered glass side panel for showcasing internal components, and includes a Prizm 120 ARGB fan for enhanced cooling and aesthetics. This manual provides comprehensive instructions for the assembly, operation, and maintenance of your DA601 case, ensuring optimal performance and longevity.

2. Proizvod je gotovview

2.1 Ključne karakteristike

• ARGB Front Panel: Features 4 LED strips on the front panel, easily controlled by a single button or motherboard synchronization.
• Pre-Installed ARGB Fan: Includes one Prizm 120 ARGB fan for improved thermal performance and customizable lighting.
• Cijeli ekran View: A crystal-clear tempered glass side panel allows for a complete view of your internal PC components.
• High Water-Cooling Capability: Dizajniran sa ample space to support both All-In-One (AIO) and custom liquid cooling configurations.
• Inbuilt LED Controller: Connects to a 3-pin header on the motherboard for 16.8 million custom color options and synchronization.

2.2 Component Layout and Compatibility

Familiarize yourself with the internal layout and component compatibility of the Antec DA601 case before beginning assembly.

Slika 2.1: Naprijed lijevo view of the Antec Dark Avenger DA601 E-ATX Mid Tower Case, showcasing the ARGB front panel and tempered glass side panel.

Slika 2.2: Gornji prednji dio view of the Antec Dark Avenger DA601 E-ATX Mid Tower Case, highlighting the top ventilation and front panel I/O ports.

Figure 2.3: Diagram illustrating the internal component layout and compatibility of the Antec DA601 case, including motherboard, GPU, CPU cooler, PSU, and storage drive locations.

3. Upute za postavljanje

Follow these steps to assemble your PC components within the Antec DA601 case.

3.1 Priprema slučaja

1. Postavite kućište na stabilnu, ravnu površinu.
2. Carefully remove the tempered glass side panel by unscrewing the thumb screws and gently pulling it away. Set it aside on a soft, protected surface.
3. Uklonite suprotnu metalnu bočnu ploču kako biste pristupili području za upravljanje kablovima.

3.2 Instalacija matične ploče

1. Install the necessary motherboard standoffs into the motherboard tray according to your motherboard's form factor (E-ATX, ATX, Micro-ATX, ITX).
2. Postavite I/O štit u zadnji otvor kućišta.
3. Pažljivo poravnajte matičnu ploču s odstojnicima i I/O štitnikom, a zatim je pričvrstite vijcima.

3.3 Instalacija jedinice za napajanje (PSU).

1. Mount your PSU into the designated bay at the bottom rear of the case.
2. Pričvrstite napajanje vijcima sa stražnje strane kućišta.

3.4 Instalacija diska za pohranu podataka

• 2.5" SSD diskovi: Mount SSDs onto the dedicated SSD trays located behind the motherboard tray. Secure them with screws.
• 3.5" tvrdi diskovi: Install HDDs into the removable drive cages located in the PSU shroud area. Slide them into place and secure with screws or tool-less mechanisms if available.

3.5 Instalacija grafičke kartice i kartice za proširenje

1. Uklonite potrebne poklopce PCIe utora sa stražnje strane kućišta.
2. Umetnite grafičku karticu ili druge kartice za proširenje u odgovarajuće PCIe utore na matičnoj ploči.
3. Pričvrstite kartice vijcima.

3.6 Upravljanje kablovima

Utilize the cable routing grommets and tie-down points behind the motherboard tray to organize and secure cables. This improves airflow and aesthetics.

3.7 Povezivanje I/O prednje ploče

Connect the front panel cables (USB, audio, power switch, reset switch, power LED, HDD LED, ARGB headers) to their corresponding pins on your motherboard. Refer to your motherboard manual for exact pin locations.

4. Uputstvo za upotrebu

4.1 Uključivanje

After all components are installed and cables are connected, ensure the PSU switch is in the 'ON' position. Press the power button on the top panel of the case to start your system.

4.2 ARGB kontrola osvjetljenja

The Antec DA601 features addressable RGB (ARGB) lighting on the front panel and includes an ARGB fan. You can control these lights in two ways:

• Dugme na prednjoj ploči: Press the dedicated LED control button on the top panel of the case to cycle through various lighting modes and colors.
• Sinhronizacija matične ploče: If your motherboard supports ARGB (5V 3-pin header), connect the case's ARGB cable to the motherboard. You can then control the lighting effects using your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync).

5. Održavanje

Redovno održavanje pomaže u osiguravanju optimalnih performansi i produžava vijek trajanja komponenti vašeg računara.

5.1 Čišćenje

• Filteri za prašinu: Periodically remove and clean the magnetic dust filters located on the top, front, and bottom of the case. Use compressed air or a soft brush to remove accumulated dust.
• unutrašnjost: With the system powered off and unplugged, use compressed air to gently remove dust from internal components such as fans, heatsinks, and circuit boards.
• Eksterijer: Obrišite vanjske površine mekom krpom, damp krpom. Izbjegavajte abrazivna sredstva za čišćenje ili rastvarače.

5.2 Airflow Optimization

Ensure that the case's ventilation areas are not obstructed. Proper cable management contributes to better airflow, preventing heat buildup inside the case.

6. Otkrivanje problema

Ovaj odjeljak se bavi uobičajenim problemima s kojima se možete susresti.

6.1 Nema napajanja

• Verify that the power cable is securely connected to both the PSU and the wall outlet.
• Ensure the PSU's power switch is in the 'ON' position.
• Check that the front panel power switch cable is correctly connected to the motherboard's power header.

6.2 Fans Not Spinning

• Confirm that all fan power cables are securely connected to the motherboard or a fan controller.
• Check BIOS/UEFI settings to ensure fan control is enabled and configured correctly.

6.3 ARGB Lights Not Working

• Ensure the ARGB cables from the front panel and fan are correctly connected to the case's inbuilt LED controller or directly to a 5V 3-pin ARGB header on your motherboard.
• If using motherboard sync, verify that your motherboard's RGB software is installed and configured correctly.
• Try cycling through modes using the front panel LED button to rule out software issues.

6.4 Problemi s pregrijavanjem

• Ensure all case fans are spinning and oriented correctly for optimal airflow (intake/exhaust).
• Očistite filtere za prašinu i unutrašnje komponente kako je opisano u odjeljku Održavanje.
• Provjerite da li ventilatori za CPU i GPU ispravno funkcionišu.

7. Specifikacije

8. Informacije o garanciji

Antec provides a limited warranty for the Dark Avenger DA601 E-ATX Mid Tower Case. The specific terms and duration of the warranty may vary by region and retailer. Please retain your proof of purchase (receipt or invoice) as it will be required for any warranty claims. For detailed warranty information, including coverage, limitations, and the claims process, please visit the official Antec website or contact your local Antec distributor.

9. Podrška

Should you require technical assistance, have questions about your product, or need customer service, please utilize the following resources:

• Zvanični Antec Webstranica: Posjetite www.antec.com for product information, FAQs, and support contact details.
• Služba za korisnike: Refer to the 'Contact Us' section on the Antec website for regional customer support phone numbers or email addresses.