HyperGear Wave prijenosni bežični Bluetooth zvučnik 14704 Korisnički priručnik

Uvod

The HyperGear Wave Portable Wireless Bluetooth Speaker (Model 14704) is designed to deliver high-definition stereo sound in various environments. Its IPX4 waterproof rating makes it suitable for use near water, while the built-in microphone allows for hands-free calls. This manual provides essential information for the proper setup, operation, and maintenance of your speaker.

Image: HyperGear Wave speaker, showcasing its waterproof design with water splashes.

Sadržaj paketa

Provjerite da li su sve stavke prisutne u paketu:

• HyperGear Wave Speaker
• 3.5mm Stereo Auxiliary Cable
• Micro USB kabl za punjenje
• Korisnički priručnik (ovaj dokument)

Image: The HyperGear Wave speaker alongside its included 3.5mm auxiliary cable and Micro USB charging cable.

Setup

1. Punjenje zvučnika

Before initial use, fully charge the speaker. Connect the Micro USB Charging Cable to the speaker's charging port and the other end to a USB power source (e.g., wall adapter, computer USB port). The charging indicator light will illuminate during charging and turn off or change color when fully charged.

2. Uključivanje / isključivanje napajanja

Press and hold the Power button (usually marked with a power icon) for approximately 3 seconds to turn the speaker on or off. A sound prompt or LED indicator will confirm the status change.

Uputstvo za upotrebu

1. Bluetooth uparivanje

1. Provjerite je li zvučnik uključen i nalazi se unutar 10 metara od vašeg Bluetooth uređaja.
2. The speaker will automatically enter pairing mode, indicated by a flashing LED light (refer to your speaker's specific LED behavior).
3. On your device, navigate to the Bluetooth settings and search for available devices.
4. Select "HyperGear Wave" (or similar name) from the list.
5. Once paired, the speaker will emit a confirmation sound, and the LED light will become solid.

Zvučnik će automatski pokušati ponovo da se poveže sa poslednjim uparenim uređajem kada se uključi.

Image: The HyperGear Wave speaker positioned on sand, demonstrating its wireless capability for outdoor use.

2. Osnovne kontrole

• Pusti/pauza: Pritisnite dugme za reprodukciju/pauzu jednom.
• Povećavanje glasnoće: Pritisnite dugme '+'.
• Smanjivanje jačine zvuka: Pritisnite dugme '-'.
• Sljedeća pjesma: Pritisnite i držite dugme '+'.
• Prethodni zapis: Pritisnite i držite dugme '-'.
• Odgovori/Završi poziv: Pritisnite dugme Reprodukuj/Pauziraj jednom tokom dolaznog poziva.
• odbiti poziv: Pritisnite i držite dugme Reprodukuj/Pauziraj tokom dolaznog poziva.

3. Režimi audio ulaza

The HyperGear Wave speaker supports multiple audio input options:

• Bluetooth način rada: Zadana bežična veza.
• Auxiliary (AUX) Mode: Connect an audio device using the included 3.5mm Stereo Auxiliary Cable. The speaker will automatically switch to AUX mode when the cable is inserted.
• Način rada mikro SD kartice: Umetnite Micro SD karticu (nije uključena) sa zvukom fileu predviđeni utor. Zvučnik će automatski detektovati i reprodukovati muziku sa kartice.

Slika: Krupni plan view of the speaker highlighting its compatibility with Bluetooth, Auxiliary input, and Micro SD cards.

Održavanje

• čišćenje: Koristite meku, damp cloth to clean the speaker's exterior. Avoid harsh chemicals or abrasive cleaners.
• Izloženost vodi: While IPX4 waterproof, avoid submerging the speaker. Ensure all port covers are securely closed before exposure to water.
• Skladištenje: Čuvajte zvučnik na hladnom i suhom mjestu, dalje od ekstremnih temperatura i direktne sunčeve svjetlosti.
• Održavanje baterije: Da biste produžili vijek trajanja baterije, izbjegavajte često potpuno pražnjenje zvučnika. Redovno ga punite, čak i ako se ne koristi duži period.

Image: The HyperGear Wave speaker attached to a kayak, illustrating its suitability for splash-prone environments.

Rješavanje problema

• Zvučnik se ne uključuje: Provjerite je li baterija napunjena. Spojite kabel za punjenje i pokušajte ponovo.
• Nije moguće uparivanje sa Bluetooth uređajem:
  • Provjerite je li zvučnik u načinu uparivanja (trepćuća LED lampica).
  • Provjerite je li Bluetooth omogućen na vašem uređaju.
  • Približite zvučnik uređaju (unutar 33 metara).
  • Isključite i uključite i zvučnik i Bluetooth na uređaju.
  • Forget the speaker from your device's Bluetooth list and attempt to re-pair.
• Nema zvuka ili je jačina zvuka niska:
  • Podesite jačinu zvuka i na zvučniku i na povezanom uređaju.
  • Ensure the speaker is properly paired or the AUX cable/Micro SD card is correctly inserted.
  • Provjerite reproducira li se izvor zvuka.
• Loš kvalitet zvuka:
  • Približite zvučnik Bluetooth uređaju kako biste izbjegli smetnje.
  • Provjerite da nema prepreka između zvučnika i vašeg uređaja.
  • If using AUX, check the cable for damage and ensure it's fully inserted.

Specifikacije

Garancija i podrška

Informacije o garanciji

This HyperGear product comes with a Limited Warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included in your product packaging or visit the official HyperGear website.

Korisnička podrška

If you encounter any issues or have questions not covered in this manual, please contact HyperGear customer support. Contact information can typically be found on the product packaging or the official HyperGear webstranica: www.hypergear.com.