Oasser T1

Oasser T1 Digital LCD Breathalyzer Alcohol Tester User Manual

Model: T1

Uvod

This manual provides detailed instructions for the safe and effective use of your Oasser T1 Digital LCD Breathalyzer Alcohol Tester. Please read this manual thoroughly before operating the device and retain it for future reference. This device is designed to estimate blood alcohol content (BAC) for personal reference only and should not be used to determine whether it is safe to operate a vehicle or machinery.

Sigurnosne informacije

  • Do not operate the device immediately after consuming alcohol. Wait at least 20 minutes after drinking, eating, or smoking to ensure accurate readings. Residual alcohol in the mouth can lead to inaccurate results.
  • This device provides an estimate of BAC for personal reference only. It is not a legal instrument and should not be relied upon to determine fitness to drive or perform tasks requiring sobriety.
  • Držite uređaj van domašaja djece.
  • Avoid using the device in strong winds, smoke, or highly polluted environments, as this may affect accuracy.
  • Do not attempt to disassemble or repair the device yourself. Contact customer support if the device malfunctions.
  • Use only specified batteries (3 AAA). Ensure correct polarity when inserting batteries.

Sadržaj paketa

Provjerite da li se sve stavke nalaze u vašem paketu:

  • Oasser T1 Digital LCD Breathalyzer
  • 4 x Mouthpieces
  • 3 x AAA baterije
  • Uputstvo za upotrebu
Oasser T1 Breathalyzer package contents including device, manual, mouthpieces, and box.

Image: Contents of the Oasser T1 Breathalyzer package, showing the device, user manual, four mouthpieces, and the product box.

Product Overview

The Oasser T1 Breathalyzer features a compact design with an easy-to-read digital LCD display and a semi-conductor sensor for alcohol detection.

Front view of the Oasser T1 Breathalyzer with digital LCD display showing 0.00 %BAC and four mouthpieces.

Slika: Front view of the Oasser T1 Breathalyzer, displaying "0.00 %BAC" on its digital LCD screen, alongside four transparent mouthpieces.

Komponente:

  • Priključak za usnik: Where the disposable mouthpiece is inserted.
  • LCD ekran: Shows BAC readings, battery status, and operational prompts.
  • Dugme za napajanje: Used to turn the device on/off and initiate testing.
  • Pretinac za baterije: Located on the back, holds 3 AAA batteries.

Setup

  1. Instalirajte baterije: Open the battery compartment cover on the back of the device. Insert 3 AAA batteries, ensuring correct polarity (+/-). Close the cover securely.
  2. Attach Mouthpiece: Select one of the provided mouthpieces. Insert it firmly into the mouthpiece port located on the top edge of the breathalyzer.
Hand holding the Oasser T1 Breathalyzer with a mouthpiece attached, and three additional mouthpieces.

Image: A hand holding the Oasser T1 Breathalyzer with a mouthpiece already inserted, demonstrating how to attach it. Three spare mouthpieces are visible next to the device.

Uputstvo za upotrebu

Follow these steps for an accurate breath alcohol test:

  1. Uključeno: Press and hold the power button for approximately 1 second. The device will emit a beep, and the LCD display will light up.
  2. zagrijavanje: The device will display "WARM UP" and count down from 10 to 0. This indicates the sensor is preparing for testing.
  3. Započni test: Once the warm-up is complete, the device will display "BLOW" and count down from 10 to 0. During this time, take a deep breath.
  4. Blow into Mouthpiece: Place your lips around the mouthpiece and blow steadily and continuously for about 5 seconds until you hear a beep. Ensure no air escapes from the sides of your mouth.
  5. View Rezultati: After blowing, the device will process the sample and display your estimated BAC on the LCD screen. The result will be shown for approximately 10 seconds.
  6. Iskljuciti: The device will automatically power off after displaying the result for a few seconds, or you can press and hold the power button to turn it off manually.
Man using the Oasser T1 Breathalyzer in a car, blowing into the mouthpiece.

Image: A man demonstrating the use of the Oasser T1 Breathalyzer while seated in a car, blowing into the attached mouthpiece.

Understanding Results

The Oasser T1 Breathalyzer displays results in %BAC (Blood Alcohol Content). The interpretation of these results is for informational purposes only.

  • 0.00% BAC: Indicates no alcohol detected.
  • Low BAC Readings: Small amounts of alcohol detected.
  • Higher BAC Readings: Indicates increased alcohol presence.

Important: Legal limits for driving vary by region. A low reading does not guarantee that you are fit to drive or that you are below the legal limit. Always exercise caution and responsible judgment.

Održavanje

  • čišćenje: Obrišite spoljašnjost uređaja mekom krpom, damp tkanina. Nemojte koristiti abrazivna sredstva za čišćenje niti uranjati uređaj u vodu.
  • Usnici: The provided mouthpieces are reusable after cleaning. Wash them with warm water and mild soap, then rinse thoroughly and allow them to air dry completely before reuse. Replace mouthpieces if they show signs of wear or damage.
  • Skladištenje: Store the breathalyzer in a cool, dry place, away from direct sunlight and extreme temperatures. Remove batteries if the device will not be used for an extended period to prevent leakage.

Rješavanje problema

ProblemMogući uzrokRješenje
Uređaj se ne uključuje.Prazne ili nepravilno umetnute baterije.Zamijenite baterije novim AAA baterijama, pazeći na ispravan polaritet.
Netačna ili nedosljedna očitanja.
  • Tested too soon after drinking/eating/smoking.
  • Nedovoljan dah sample.
  • Usnik nije pravilno pričvršćen.
  • Smetnje u okolini.
  • Wait at least 20 minutes before testing.
  • Ensure a steady, continuous blow for 5 seconds.
  • Re-attach mouthpiece firmly.
  • Test in a clean, calm environment.
"Err" ili neka druga poruka o grešci na ekranu.Sensor malfunction or improper operation.Isključite uređaj, pričekajte nekoliko minuta i pokušajte ponovo. Ako greška i dalje postoji, obratite se korisničkoj podršci.

Specifikacije

FeatureDetalj
Tip senzoraSemi-conductor alcohol sensor
DisplayDigitalni LCD sa pozadinskim osvetljenjem
Measurement Range0.00 - 0.19% BAC (or equivalent)
Power Input3 x AAA 1.5V alkalne baterije
Radna temperatura10°C - 50°C (50°F - 122°F)
Temperatura skladištenja0°C - 40°C (32°F - 104°F)
DimenzijeApproximately 110mm x 60mm x 20mm (4.33in x 2.36in x 0.79in)
TežinaApproximately 6.08 ounces (with batteries)
Oasser T1 Breathalyzer next to a smartphone, showing dimensions: 110mm/4.33in length, 60mm/2.36in width, 20mm/0.79in thickness.

Image: The Oasser T1 Breathalyzer positioned next to a smartphone, illustrating its compact size and providing specific dimensions for length, width, and thickness.

Garancija i podrška

Oasser products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official Oasser website.

Molimo sačuvajte svoj dokaz o kupovini za zahtjeve u vezi s garancijom.

Povezani dokumenti - T1

Preview Oasser Mini pumpa za gume TZ101 - uputstvo za upotrebu
Uputstvo za upotrebu za Oasser Mini pumpu za gume TZ101. Saznajte više o njenim karakteristikama, specifikacijama, dodatnoj opremi, uputstvima za upotrebu i sigurnosnim mjerama predostrožnosti za efikasno napuhavanje guma.
Preview Vodič za sigurnost i upotrebu Oasser električnog zračnog kompresora
Pročitajte osnovne sigurnosne upute i savjete za korištenje vašeg Oasser električnog kompresora zraka kako biste osigurali pravilan rad, održavanje baterije i dugotrajnost. Uključuje kontakt informacije za podršku.
Preview Oasser AK1 airbrush set - uputstvo za upotrebu
Uputstvo za upotrebu za Oasser AK1 set airbrush-a, koje detaljno opisuje njegove karakteristike, rad, održavanje i sigurnosne mjere. Uključuje informacije o airbrush-u, kompresoru i dodatnoj opremi.
Preview Uputstvo za upotrebu Oasser P2S 20V vazdušnog kompresora
Sveobuhvatno uputstvo za upotrebu prenosnog vazdušnog kompresora Oasser P2S 20V, koje obuhvata instalaciju, tehničke specifikacije, korake rukovanja i rešavanje problema.
Preview Uputstvo za upotrebu prenosnog električnog vazdušnog kompresora Oasser FC810
Sveobuhvatni priručnik za upotrebu Oasser prijenosnog električnog kompresora zraka, model FC810. Uključuje postavljanje, sigurnosne smjernice, tehničke specifikacije i rješavanje problema.
Preview Oasser MS22C-203B PIC Uputstvo za upotrebu električnog pumpača za gume
Sveobuhvatno korisničko uputstvo za Oasser MS22C-203B PIC električni pumpa za gume, koje obuhvata karakteristike, uputstva, sigurnosne mjere predostrožnosti i održavanje. Naučite kako efikasno i sigurno koristiti pumpu za gume.