Sharkoon SilentStorm Cool Zero 750W ATX napajanje - uputstvo za upotrebu

1. Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of your Sharkoon SilentStorm Cool Zero 750W ATX Power Supply. Please read this manual thoroughly before using the product to ensure proper functionality and safety.

2. Sigurnosna uputstva

• Uvijek isključite napajanje iz AC utičnice prije instalacije ili održavanja.
• Ne otvarajte napajanje casing. Visoka zapreminatagUnutra su prisutni elementi koji mogu uzrokovati strujni udar.
• Osigurajte pravilno uzemljenje vašeg računarskog sistema.
• Instalirajte napajanje u dobro prozračenom prostoru.
• Izbjegavajte izlaganje napajanja vlazi ili ekstremnim temperaturama.
• Koristite samo modularne kablove koji su isporučeni s ovim napajanjem. Korištenje nekompatibilnih kablova može oštetiti uređaj ili povezane komponente.

3. Sadržaj paketa

Provjerite da li se sve stavke nalaze u vašem paketu:

• Sharkoon SilentStorm Cool Zero 750W ATX Power Supply Unit
• Modular Cable Set (including motherboard, CPU, PCIe, SATA, and IDE cables)
• AC strujni kabl
• Torba za pohranu kablova
• Montažni vijci
• Korisnički priručnik (ovaj dokument)

Figure 3.1: Power Supply Unit with Modular Cables and Storage Bag

4. Proizvod je gotovview

The Sharkoon SilentStorm Cool Zero 750W is an 80 PLUS Gold certified ATX power supply designed for reliable and efficient performance. It features a fully modular design, allowing for cleaner cable management and improved airflow within your PC case. High-quality 105°C Japanese capacitors and a 135mm hydrodynamic bearing fan ensure quiet and stable operation.

4.1 Ključne karakteristike

• 80 PLUS zlatni certifikat: Achieves at least 90% efficiency at 50% load and 87% efficiency at 20% and 100% load.
• Fully Modular Cable Management: Connect only the cables you need, reducing clutter.
• Komponente visokog kvaliteta: Utilizes 105°C Japanese capacitors for enhanced durability and stability.
• 135mm Hydrodynamic Bearing Fan: Provides quiet and efficient cooling with an extended lifespan.
• Prilagodljivo hlađenje: Features Zero RPM Fan Mode and Fan Delay Mode for optimized thermal management.

Slika 4.1: Prednja i bočna strana View of the Power Supply

Slika 4.2: Vrh View with Modular Ports

Figure 4.3: Rear Panel with Switches

Figure 4.4: Detail of Fan Control Switches

5. Postavljanje i instalacija

Slijedite ove korake za instalaciju napajanja:

1. Pripremite svoj sistem: Ensure your computer is powered off and disconnected from the AC outlet. Open your PC case.
2. Uklonite stari PSU (ako je primjenjivo): Disconnect all cables from your old power supply and remove its mounting screws. Carefully take out the old unit.
3. Montiranje novog napajanja: Insert the Sharkoon SilentStorm Cool Zero 750W into the power supply bay of your PC case. Secure it with the provided mounting screws.
4. Spojite osnovne kablove:
   • Connect the 24-pin ATX motherboard cable to the corresponding port on your motherboard.
   • Spojite 4+4-pinski ili 8-pinski kabel za napajanje procesora na priključak za napajanje procesora na matičnoj ploči.
5. Spajanje perifernih kablova: Connect any necessary PCIe (for graphics cards), SATA (for storage drives), and IDE (for older peripherals) cables to the modular ports on the power supply and then to your components. Only connect the cables you need to minimize clutter.
6. Upravljanje kablovima: Uredno provucite kablove kako biste poboljšali protok zraka i estetiku.
7. Zatvorite kućište i priključite AC napajanje: Close your PC case. Connect the AC power cord to the power supply and then to a wall outlet.

6. Uputstvo za upotrebu

After installation, ensure the main power switch on the rear of the PSU is in the 'ON' position. You can then power on your computer.

6.1 Fan Control Modes

The SilentStorm Cool Zero 750W features two customizable fan modes, controlled by switches on the rear panel:

• Način rada ventilatora s nultim brojem okretaja: When this mode is active (switch set to 'ON'), the power supply fan will remain off at low to medium loads, providing silent operation. The fan will automatically activate when the load increases to maintain optimal temperatures. If the switch is set to 'OFF', the fan will always spin.
• Način rada odgode ventilatora: If enabled (switch set to 'ON'), the power supply fan will continue to run for approximately 60 seconds after the system is shut down. This helps to dissipate residual heat and ensures complete cooling of the system components. If the switch is set to 'OFF', the fan will stop immediately upon system shutdown.

7. Održavanje

Redovno održavanje pomaže u osiguravanju dugotrajnosti i optimalnih performansi vašeg napajanja.

• Čišćenje prašine: Periodically clean the fan grille and interior of your PC case to prevent dust buildup. Dust can impede airflow and reduce cooling efficiency. Use compressed air to gently remove dust from the power supply's fan and vents.
• inspekcija: Occasionally inspect cables for any signs of wear or damage. Ensure all connections are secure.
• sigurnost: Always disconnect the power supply from the AC outlet before performing any cleaning or inspection.

8. Otkrivanje problema

Ako imate problema s napajanjem, pogledajte sljedeće uobičajene probleme i rješenja:

• Nema napajanja:
  • Provjerite je li kabel za napajanje naizmjeničnom strujom sigurno spojen i na izvor napajanja i na zidnu utičnicu.
  • Check that the main power switch on the rear of the PSU is in the 'ON' position.
  • Provjerite da li je zidna utičnica funkcionalna.
  • Confirm all modular cables are correctly seated in both the PSU and the components.
• Nestabilnost/Padovi sistema:
  • Osigurajte da je vaše napajanje ispravnotage je dovoljno za sve vaše komponente.
  • Provjerite ima li labavih kablovskih veza.
  • If overclocking, return to default settings to rule out power delivery issues.
• Prekomjerna buka ventilatora:
  • Check if Zero RPM Fan Mode is enabled. If so, the fan will only spin under higher loads.
  • Očistite svu nakupljenu prašinu s ventilatora i ventilacijskih otvora.
  • Osigurajte da je napajanje sigurno montirano kako biste spriječili vibracije.

If problems persist after attempting these solutions, contact Sharkoon customer support or a qualified technician.

9. Specifikacije

10. Garancija i podrška

Za informacije o garanciji i tehničkoj podršci, molimo vas da se obratite službenom Sharkoon servisu. webweb-mjesto ili kontaktirajte lokalnog prodavača. Sačuvajte dokaz o kupovini za slučaj reklamacije.