ECCO ED0016R Directional LED Magnetic Mount Light User Manual

1. Uvod

1.1 Proizvod završenview

The ECCO ED0016R is a directional LED light designed for various warning and safety applications. It features 18 red LEDs, a magnetic mounting base for easy attachment to ferrous surfaces, and is powered by four AA batteries. Its compact and durable design makes it suitable for temporary or portable use.

Image of the ECCO ED0016R Directional LED Magnetic Mount Light, showcasing its red LEDs and magnetic base.

1.2 Namenska upotreba

This device is intended for use as a temporary warning or directional light in industrial, commercial, or personal safety environments. It is designed to provide high visibility to alert others to potential hazards or direct traffic flow. It is not intended for permanent installation or as a primary safety device without additional safety measures.

1.3 Sadržaj paketa

• 1 x ECCO ED0016R Directional LED Magnetic Mount Light

Napomena: Za rad su potrebne 4 AA baterije i nisu uključene u pakovanje.

2. Važne informacije o sigurnosti

Please read and understand all safety instructions before operating this product. Failure to follow these instructions may result in injury or damage to the product.

• Držite uređaj podalje od djece.
• Ne rastavljajte, ne modificirajte niti pokušavajte popraviti uređaj. To će poništiti garanciju i može uzrokovati oštećenje ili ozljedu.
• Ensure the magnetic mount is securely attached to a clean, flat, ferrous surface before operation. Verify stability to prevent the light from falling.
• Ne izlažite uređaj ekstremnim temperaturama, direktnoj sunčevoj svjetlosti duži period ili prekomjernoj vlazi.
• Use only the specified battery type (AA).
• Insert batteries with correct polarity (+/-) as indicated inside the battery compartment.
• Nemojte miješati stare i nove baterije ili različite vrste baterija.
• Remove depleted batteries promptly to prevent leakage and damage.
• Baterije odložite u skladu sa lokalnim propisima.

2.1 Kalifornijski prijedlog 65 Upozorenje

UPOZORENJE: Ovaj proizvod vas može izložiti hemikalijama za koje je u državi Kalifornija poznato da uzrokuju rak i urođene mane ili druge reproduktivne štete. Za više informacija idite na www.P65Warnings.ca.gov.

3. Podešavanje

3.1 Instalacija baterije

1. Pronađite poklopac odjeljka za bateriju na uređaju.
2. Open the cover by sliding or unscrewing it, as applicable.
3. Insert four (4) AA batteries, ensuring the positive (+) and negative (-) terminals align with the markings inside the compartment.
4. Sigurno zatvorite poklopac odjeljka za baterije.

3.2 Montiranje svjetla

The ECCO ED0016R features a magnetic base for easy attachment.

1. Ensure the desired mounting surface is clean, dry, and made of a ferrous material (e.g., steel).
2. Place the magnetic base of the light firmly onto the surface.
3. Verify that the light is securely attached and will not dislodge due to vibrations or movement.

4. Operacija

4.1 Uključivanje/isključivanje

Za upravljanje svjetlom:

• Pronađite dugme za napajanje na uređaju.
• Press the power button once to turn the light ON.
• Ponovo pritisnite dugme za napajanje da biste isključili svjetlo.

5. Održavanje

5.1 Zamjena baterije

When the light dims or ceases to function, it is time to replace the batteries. Follow the steps outlined in Section 3.1 Battery Installation to replace the four AA batteries.

5.2 Čišćenje

Za čišćenje uređaja:

• Ensure the device is turned off and batteries are removed if performing a thorough cleaning.
• Obrišite vanjske površine mekom krpom, damp tkanina.
• Ne koristite abrazivna sredstva za čišćenje, rastvarače ili jake hemikalije, jer mogu oštetiti završnu obradu ili unutrašnje komponente.
• Ensure the device is completely dry before reinstalling batteries or operating.

6. Otkrivanje problema

If you encounter issues with your ECCO ED0016R light, refer to the following troubleshooting guide:

• Svjetlo se ne pali:
  • Check if batteries are installed correctly with the proper polarity.
  • Ensure batteries are not depleted. Replace with new AA batteries if necessary.
  • Provjerite je li poklopac pretinca za baterije sigurno zatvoren.
• Svjetlo je slabo ili treperi:
  • Batteries may be low. Replace all four AA batteries with new ones.
• Light does not stay mounted:
  • Ensure the mounting surface is clean, dry, and free of debris.
  • Verify the surface is made of a ferrous material suitable for magnetic attachment.
  • The surface may be too thin or have insufficient ferrous content. Try a different mounting location.

7. Specifikacije

8. Garancija i podrška

For warranty information, technical support, or service inquiries regarding your ECCO ED0016R Directional LED Magnetic Mount Light, please contact ECCO customer service directly. Refer to the official ECCO webnajnovije kontakt informacije potražite na web-mjestu ili pakiranju proizvoda.

Please have your model number (ED0016R) and purchase details available when contacting support.