lightmaXX Nano PAR FX 3x 4 W LED RGBW User Manual

1. Uvod

Hvala na kupoviniasing the lightmaXX Nano PAR FX 3x 4 W LED RGBW. This compact and powerful LED PAR spot is designed for various lighting applications, offering vibrant RGBW color mixing and dynamic strobe effects. This manual provides essential information for safe operation, setup, and maintenance of your device. Please read it thoroughly before use.

Figure 1: lightmaXX Nano PAR FX LED PAR Spot

2. Sigurnosna uputstva

To ensure safe operation, please observe the following safety instructions:

• Napajanje: Connect the device only to a grounded power outlet with the correct voltage (230V AC).
• ventilacija: Osigurajte odgovarajuću ventilaciju oko uređaja. Ne blokirajte ventilacijske otvore.
• Vlaga: Do not expose the device to rain or moisture. Do not use it in damp okruženja.
• temperatura: Operate the device within the specified temperature range. Avoid extreme heat or cold.
• Rukovanje: Pažljivo rukujte uređajem. Izbjegavajte ispuštanje ili izlaganje jakim udarcima.
• Održavanje: Za sve servisne radove obratite se kvalifikovanom servisnom osoblju. Ne pokušavajte sami popraviti uređaj.
• Izlaz svjetlosti: Avoid looking directly into the light source, as it can cause eye damage.

3. Podešavanje

3.1 Fizički smještaj

The lightmaXX Nano PAR FX is designed as a floor spot but can also be mounted using its adjustable bracket. Ensure the mounting surface or location is stable and can support the weight of the fixture. Allow sufficient space around the unit for proper ventilation.

3.2 Veze

Connect the power cable to a suitable power outlet. For DMX control, connect a DMX cable from your DMX controller to the DMX IN port of the fixture. If linking multiple units, connect a DMX cable from the DMX OUT port of the first fixture to the DMX IN port of the next, and so on.

Figure 2: Rear panel with DMX ports and control display

4. Uputstvo za upotrebu

4.1 Kontrolna tabla

The rear panel features a digital display and four control buttons: MENU, UP, DOWN, and ENTER. These buttons allow you to navigate through the settings and select various operating modes.

• MENI: Pritisnite za cikličko kretanje kroz opcije glavnog menija.
• GORE: Povećava vrijednosti ili se pomiče prema gore u opcijama menija.
• DOLJE: Smanjuje vrijednosti ili se pomiče prema dolje u opcijama menija.
• ENTER: Potvrđuje izbor ili ulazi u podmeni.

4.2 Daljinski upravljač

The lightmaXX Nano PAR FX comes with an infrared (IR) remote control for convenient operation. Ensure there is a clear line of sight between the remote and the fixture's IR receiver.

Figure 3: Product with Remote Control

4.3 Načini rada

The fixture offers several built-in operating modes, accessible via the control panel or remote:

• Automatski režim: Cycles through pre-programmed light shows automatically.
• Režim zvuka: Reacts to music or sound via a built-in microphone.
• Način skoka: Changes colors abruptly.
• Fade Mode: Smoothly transitions between colors.
• Strobe mod: Produces a flashing light effect.

4.4 Color Mixing

The Nano PAR FX features RGBW LEDs, allowing for a wide spectrum of colors. You can select individual colors or mix them to create custom hues using the remote control or DMX.

Slika 4: Pramples of color outputs

Red Light Output

Green Light Output

4.5 DMX rad

For professional control, the Nano PAR FX can be operated via DMX512. Set the DMX address using the control panel. Consult the DMX channel chart (typically found in a separate DMX manual or product sheet) for specific channel assignments for color, dimming, strobe, and mode control.

5. Održavanje

5.1 Čišćenje

Regular cleaning helps maintain optimal performance and extends the lifespan of your fixture.

• Isključite napajanje prije čišćenja.
• Za brisanje vanjske strane koristite meku krpu koja ne ostavlja dlačice.
• For lenses, use a specialized lens cleaner and a soft cloth to avoid scratches.
• Nemojte koristiti abrazivna sredstva za čišćenje ili rastvarače.

5.2 Skladištenje

When not in use, store the fixture in a dry, dust-free environment, preferably in its original packaging or a protective case.

6. Otkrivanje problema

7. Specifikacije

8. Garancija i podrška

This product is subject to the standard return policy of 30 days from the date of purchase. For technical support, service, or warranty inquiries, please contact your retailer or the lightmaXX customer service department. Please have your model number (LIG0015652-000) and proof of purchase ready when contacting support.