PROFLO PF4001LS 4001 serija ventila za kadu i tuš s uravnoteženim pritiskom - Uputstvo za upotrebu

Uvod

This instruction manual provides detailed information for the installation, operation, and maintenance of your PROFLO PF4001LS 4001 Series Pressure Balanced Tub and Shower Valve. This valve is designed to provide consistent water temperature and pressure, enhancing your showering experience. Please read this manual thoroughly before beginning installation or operation to ensure proper function and safety.

Sigurnosne informacije

WARNING: Failure to follow these instructions could result in personal injury or property damage.

• Uvijek isključite glavni dovod vode prije ugradnje ili servisiranja ventila.
• Nosite odgovarajuću ličnu zaštitnu opremu, uključujući zaštitne naočale i rukavice, tokom instalacije.
• Ako niste sigurni u vezi bilo kojeg dijela procesa instalacije, obratite se kvalificiranom vodoinstalateru.
• This product contains brass, which may expose you to lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.
• Prije ponovnog uspostavljanja dovoda vode provjerite jesu li svi priključci sigurni i ne propuštaju.

Product Overview

The PROFLO PF4001LS valve is a robust, forged brass unit featuring a one-piece ceramic disc cartridge for reliable performance and easy maintenance. Its pressure-balanced design helps maintain a constant water temperature, preventing sudden changes due to pressure fluctuations in your plumbing system.

Slika 1: Prednja strana view of the PROFLO PF4001LS Pressure Balanced Tub and Shower Valve, showcasing its brass body and connection points.

Ključne karakteristike:

• Pressure balance valve less stops
• One-piece cartridge design for ease of maintenance
• Ceramic disc valve cartridge
• Back-to-back capability
• Forged brass valve body

Specifikacije

Instalacija

Professional installation is recommended for this product. Ensure you have all necessary tools and materials before beginning. Refer to the official Uputstvo za instalaciju (PDF) for detailed diagrams and specific plumbing codes.

Kontrolna lista prije instalacije:

• Provjerite jesu li svi dijelovi prisutni i neoštećeni.
• Ensure main water supply is turned off.
• Clear the work area and have appropriate tools ready (e.g., pipe cutter, soldering torch, flux, solder, tape measure, level, safety glasses).
• Familiarize yourself with local plumbing codes.

Koraci instalacije:

1. Prepare Rough-In: Mount the valve rough-in body securely to the framing, ensuring it is plumb and at the correct depth for your wall finish. The valve body has mounting ears for this purpose.
2. Spojite vodovodne cijevi: Connect the hot and cold water supply lines to the clearly marked inlets on the valve body using sweat connections. Ensure proper soldering techniques are used to prevent leaks. The valve is designed for 1/2" connections.
3. Spojite izlazne vodove: Connect the shower and/or tub spout outlet lines to the corresponding ports on the valve.
4. Test na curenje: Before closing the wall, turn on the main water supply slowly and check all connections for leaks. Address any leaks immediately.
5. Instalirajte kertridž: Insert the ceramic disc cartridge into the valve body. Ensure it is seated correctly.
6. Ugradnja kompleta za ugradnju: Once the wall is finished, install the decorative trim kit (sold separately) according to its specific instructions. This typically includes the escutcheon, handle, and spout.

Slika 2: Pozadi view of the PROFLO PF4001LS valve, showing the mounting brackets and additional connection points for rough-in installation.

Operacija

The PROFLO PF4001LS valve is a pressure-balanced mixing valve. This means it automatically adjusts the hot and cold water mix to maintain a consistent temperature, even if there are sudden pressure drops in either the hot or cold supply lines (e.g., someone flushes a toilet). The valve operates by rotating the handle (part of the trim kit, sold separately) to control both water flow and temperature.

• Kontrola temperature: Rotate the handle to adjust the water temperature. Typically, rotating counter-clockwise increases hot water, and clockwise increases cold water.
• Kontrola protoka: Pulling the handle out or pushing it in (depending on trim kit design) controls the water flow.
• Temperature Limit Stop: Most trim kits include a temperature limit stop feature that can be set to prevent scalding. Refer to your trim kit's instructions for adjusting this.

Održavanje

Regular maintenance will ensure the longevity and optimal performance of your PROFLO valve.

• čišćenje: Clean the visible parts of the valve (trim kit) with a soft cloth and mild soap. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.
• Zamjena kertridža: If you experience consistent drips, leaks, or difficulty in temperature control, the ceramic disc cartridge may need replacement. The one-piece design allows for relatively easy replacement. Turn off the water supply, remove the trim, and follow the instructions for cartridge removal and installation. Replacement cartridges are available from PROFLO or authorized dealers.
• Periodični pregled: Periodically inspect the valve and connections for any signs of leaks or corrosion. Address any issues promptly.

Rješavanje problema

Below are common issues and their potential solutions. If the problem persists, contact a qualified plumber or PROFLO customer support.

Garancija i podrška

PROFLO products are manufactured to the highest quality standards and are backed by a limited warranty. For specific warranty details, please refer to the warranty information provided with your purchase or visit the official PROFLO webSačuvajte dokaz o kupovini za slučaj reklamacije.

For technical assistance, replacement parts, or further inquiries, please contact PROFLO customer support or visit the PROFLO store on Amazon:

Visit the PROFLO Store