1. Uvod
This instruction manual provides essential information for the proper installation, operation, and maintenance of the WilTec Spare Part Small Turning Motor Support (Model 50039-12) for automatic incubators. Please read this manual carefully before use to ensure optimal performance and longevity of the product.
2. Proizvod je gotovview
The WilTec Small Turning Motor Support is a replacement component designed to facilitate the turning mechanism within compatible automatic incubators. It ensures the smooth and reliable rotation of eggs, which is crucial for successful incubation.
Slika 1: Vrh view of the WilTec Small Turning Motor Support. This red plastic component features several mounting holes and a central circular opening, designed to support a turning motor.
Ključne karakteristike:
- Designed as a spare part for WilTec automatic incubators (specifically item 50039).
- Provides stable support for the incubator's egg turning motor.
- Constructed from durable material for reliable performance.
3. Postavljanje i instalacija
This part is intended for replacement purposes. Ensure the incubator is disconnected from power before proceeding with installation.
- Isključivanje struje: Unplug the automatic incubator from its power source.
- Pristup: Carefully open the incubator to access the internal egg turning mechanism. Refer to your incubator's main instruction manual for specific access procedures.
- Uklonite stari dio: Identify the existing turning motor support. Unscrew or unclip the old support from its mounting points. Note the orientation and connection points.
- Instalirajte novi dio: Position the new WilTec Small Turning Motor Support (Model 50039-12) in the same orientation as the removed part. Align the mounting holes.
- Sigurni prilog: Use the original screws or appropriate fasteners to securely attach the new support. Ensure it is firmly in place and does not wobble.
- ponovo sastaviti: Close the incubator access panels.
- Test: Reconnect the incubator to power and perform a test run of the egg turning function to verify proper installation.
Slika 2: Pod uglom view of the WilTec Small Turning Motor Support, showing the hinge-like connection and various screw holes for secure attachment within the incubator.
Napomena: If you are unsure about any step, it is recommended to consult a qualified technician or contact WilTec customer support.
4. Uputstvo za upotrebu
The Small Turning Motor Support is a passive component. Once correctly installed, its operation is integrated with the automatic egg turning function of your incubator. Ensure your incubator's turning mechanism is activated according to its primary instruction manual.
The support ensures the motor remains stable during its operation, allowing for consistent and gentle egg rotation.
5. Održavanje
Regular maintenance helps prolong the life of your incubator components.
- čišćenje: Periodically inspect the support for dust, debris, or egg residue. Clean gently with a soft, damp tkanina. Izbjegavajte jake hemikalije.
- inspekcija: Check for any signs of wear, cracks, or damage. If damage is observed, replace the part immediately to prevent malfunction of the turning mechanism.
- podmazivanje: This plastic support typically does not require lubrication. Refer to your incubator's main manual for lubrication requirements of the motor itself.
Slika 3: Bočna strana view of the WilTec Small Turning Motor Support, highlighting its compact design and the pins used for alignment or attachment.
6. Otkrivanje problema
If the egg turning mechanism is not functioning correctly after replacing the support, consider the following:
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Egg turning mechanism not moving. | Incorrect installation of the support, motor malfunction, or power issue. |
|
| Unusual noise from turning mechanism. | Loose support, foreign object, or motor issue. |
|
If the issue persists, please contact WilTec customer support.
7. Specifikacije
| Atribut | Detalj |
|---|---|
| Brand | WilTec |
| Broj modela | 50039-12 |
| Kompatibilan sa | WilTec Automatic Incubator (Item 50039) |
| Dimenzije paketa | 12 x 5.5 x 1.3 cm |
| Težina artikla | 10 grama |
| Količina | 1 |
| Baterije su potrebne | br |
| Zemlja porijekla | Kina |
| ASIN | B07KWD2KK4 |
8. Podrška i kontakt informacije
For any questions, technical assistance, or in case of a product breakdown, please do not hesitate to contact WilTec customer support. Our team will be glad to assist you.
Please visit the official WilTec webweb-mjesto ili pogledajte dokumentaciju o kupovini za najnovije kontakt podatke.
WilTec Wildanger Technik GmbH
(Contact information typically found on product packaging or official websajt)
