Uvod
This instruction manual provides essential information for the safe installation, operation, and maintenance of your Knightsbridge Screwless 6G Grid Faceplate, model GDSF006MB. Please read these instructions carefully before installation and retain them for future reference.
Važne informacije o sigurnosti
UPOZORENJE: Electrical installations should only be carried out by a qualified electrician in accordance with national wiring regulations. Always isolate the mains power supply before commencing any electrical work.
- Ensure the power supply is disconnected at the consumer unit/fuse board before installation.
- Ovaj proizvod je dizajniran samo za upotrebu u zatvorenom prostoru.
- Nemojte instalirati na damp or freshly plastered surfaces.
- Ensure all connections are secure and correctly wired.
- This product is rated IP20, meaning it is protected against solid objects over 12.5mm, but has no protection against water.
Uputstva za instalaciju
The Knightsbridge Screwless 6G Grid Faceplate is designed for easy installation over a compatible 6-gang grid module. Follow these steps for a secure and aesthetic finish.
- Prepare the Grid Module: Ensure your 6-gang grid module (not supplied) is correctly installed and wired into the wall box according to electrical regulations. The module should be securely fixed to the wall box.
- Attach the Faceplate Frame: The screwless faceplate consists of two parts: a main frame and a decorative front plate. Align the main frame with the grid module and secure it using the screws provided with your grid module. Ensure it is flush with the wall.
- Secure the Decorative Front Plate: Once the main frame is securely attached, carefully clip the decorative screwless front plate onto the main frame. Apply gentle, even pressure until it clicks into place. Ensure all edges are flush and there are no gaps.
Slika 1: Prednja strana view of the Knightsbridge Screwless 6G Grid Faceplate. This image shows the six openings for grid modules and the sleek, screwless design.
Slika 2: Pod uglom view of the Knightsbridge Screwless 6G Grid Faceplate, highlighting its slim profile and matt black finish.
Operacija
The screwless faceplate itself does not have operational functions. Its purpose is to provide a clean, aesthetic finish for your installed 6-gang grid modules (e.g., light switches, dimmer switches, or sockets). Once installed, the functionality is determined by the grid modules fitted within it.
To remove the decorative front plate for maintenance or access to the grid modules, carefully insert a small flat-head screwdriver into the notch at the bottom edge of the faceplate and gently pry it off. Exercise caution to avoid damaging the finish.
Održavanje i čišćenje
To maintain the appearance and functionality of your faceplate, follow these simple guidelines:
- čišćenje: Obrišite površinu mekom, suhom krpom. Za tvrdokorne mrlje, laganoamp cloth with mild soap can be used, followed by drying with a clean, soft cloth.
- Izbjegavajte: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the matt black finish.
- inspekcija: Periodically check for any signs of damage or loose connections. If any issues are found, consult a qualified electrician.
Rješavanje problema
This section addresses common concerns related to the faceplate itself. For issues related to the electrical functionality of the grid modules, refer to their respective manuals or consult a qualified electrician.
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Faceplate does not sit flush. | Main frame not properly secured or wall box uneven. | Ensure the main frame is tightly screwed to the wall box. Check if the wall surface is even. |
| Decorative front plate does not clip on. | Nepravilno poravnanje ili prepreka. | Re-align the front plate with the main frame. Check for any debris or obstructions preventing it from clicking into place. |
| Ogrebotine ili tragovi na završnoj obradi. | Abrasive cleaning or impact. | Avoid abrasive cleaners. Handle with care during installation and cleaning. Minor marks may be permanent. |
Specifikacije
| Broj modela: | GDSF006MB |
| Opis: | Screwless 6G Grid Faceplate |
| završiti: | MattBlack |
| Materijal: | Premium Grade Steel (Alloy Steel) |
| Dimenzije (V x Š x D): | 148 mm x 148 mm x 3.5 mm |
| Neto težina: | 0.09 kg (90 grama) |
| IP ocjena: | IP20 |
| Proizvedeno u skladu sa: | BS EN 60670-1 |
| Origin of Manufacture: | Kina |
Garancija
This Knightsbridge product comes with a 15 godine garancije from the date of purchase, covering manufacturing defects. This warranty does not cover damage caused by improper installation, misuse, abuse, or normal wear and tear. Please retain your proof of purchase for any warranty claims.
Podrška i kontakt
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Knightsbridge customer support. Refer to the official Knightsbridge webstranicu za najnovije kontakt informacije.
Knightsbridge: www.mlaccessories.co.uk
