VIVO MOUNT-G100B Premium Aluminum Single LCD Monitor Wall Mount Instruction Manual

1. Uvod

This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your VIVO MOUNT-G100B Premium Aluminum Single LCD Monitor Wall Mount. Please read this manual thoroughly before beginning installation to ensure correct assembly and to prevent potential damage or injury. Keep this manual for future reference.

2. Značajke proizvoda

• Kompatibilnost ekrana: Supports monitors from 17 inches to 32 inches. Compatible with VESA mounting patterns 75x75mm and 100x100mm.
• Ergonomsko podešavanje: Offers -45° to +45° tilt, 180° swivel, and 360° rotation for optimal viewing angles.
• Pneumatic Spring Height Adjustment: Provides 7 inches of smooth vertical height adjustment.
• Robusna konstrukcija: Made from solid steel and aluminum, designed for durability and scratch resistance. Supports monitors weighing between 4.4 lbs and 15.4 lbs.
• Ušteda prostora: Wall-mounted design frees up valuable desk space. The arm can be folded back against the wall when not in use.
• Integrisano upravljanje kablovima: Built-in clips help organize and conceal cables for a tidy workspace.
• Jednostavna instalacija: Features a convenient keyhole mounting pattern and includes all necessary hardware.

3. Sadržaj paketa

Prije nego što nastavite s instalacijom, provjerite jesu li sve komponente prisutne i neoštećene.

Image: All hardware included for installation, such as M4x12mm screws, M5x12mm screws, D5 washers, screws, anchors, washers, and a 5mm Allen wrench.

• Wall Mount Arm Assembly
• VESA tanjir
• Mounting Hardware (Screws, Anchors, Washers)
• 5mm imbus ključ
• Uputstvo za upotrebu

4. Postavljanje i instalacija

Važna sigurnosna napomena: Do not install into drywall alone. The mount must be secured into a wood stud, concrete, or brick wall. For concrete or brick installations, please refer to the manual included with your product for proper drilling and hardware requirements.

4.1. Video vodič za instalaciju

4.2. Instalacija korak po korak

Step 1: Mount the Wall Bracket

Position the wall bracket against the wall where a stud is located. Mark the predrill points. Drill pilot holes. Secure the mount to the wall using the provided screws. Insert caps into the designated slots to cover the screw heads.

Image: The VIVO MOUNT-G100B wall mount arm assembly, showing the wall bracket secured to the wall.

Korak 2: Pričvrstite VESA ploču na monitor

Install screws with washers into the top two holes on the back of your monitor, leaving a small space between the screw heads and the monitor surface. This allows the monitor to hang on the VESA bracket. Once hung, attach the monitor to the VESA bracket and tighten all screws securely.

Image: A monitor's rear panel illustrating the VESA 75x75mm and 100x100mm mounting patterns, with the VESA plate ready for attachment.

Step 3: Adjust Arm Tension

After mounting the monitor, adjust the pneumatic spring arm tension using the provided Allen wrench. Turn clockwise to increase support for heavier monitors (may take 10-20 turns). Turn counter-clockwise to decrease support for lighter monitors (may take 10-20 turns). Ensure the monitor holds its position when released.

Image: The pneumatic spring arm with an inset showing how to adjust the tension using an Allen wrench. Clockwise for lighter monitors, counter-clockwise for heavier monitors.

Korak 4: Upravljanje kablovima

Route your monitor cables through the integrated cable clips on the arm to keep them organized and out of sight. This helps maintain a clean and professional workspace.

Image: The monitor arm with cables neatly tucked into the integrated cable management system.

5. Uputstvo za upotrebu

The VIVO MOUNT-G100B offers flexible adjustments to optimize your viewing iskustvo.

5.1. Adjustment Capabilities Video

5.2. Ručna podešavanja

• Nagib: The monitor can be tilted -45° to +45° to reduce glare and achieve the desired viewing kut.
• Okretni: Okrenite monitor za 180° lijevo ili desno da biste podijelili ekran s drugima ili ga prilagodili različitim zadacima.
• rotacija: Okrenite monitor za 360° za pejzažni ili portretni položaj.
• Podešavanje visine: Utilize the pneumatic spring arm for smooth vertical height adjustments up to 7 inches. Gently push or pull the monitor to the desired height.

Image: Visual representation of the monitor's tilt (+45° to -45°), swivel (+180°), and rotation (360°) adjustments.

6. Održavanje

• Redovno provjeravajte sve vijke i spojeve kako biste bili sigurni da su čvrsto zategnuti i sigurni.
• Clean the mount and monitor with a soft, dry cloth. Avoid abrasive cleaners or solvents.
• If the arm tension feels loose or too stiff, re-adjust it using the Allen wrench as described in the "Adjust Arm Tension" section.

7. Otkrivanje problema

• Monitor does not stay at desired height: The pneumatic spring tension may need adjustment. Refer to "Step 3: Adjust Arm Tension" in the installation section. Ensure your monitor's weight is within the supported range (4.4 lbs - 15.4 lbs).
• Monitor je teško pomicati: The pneumatic spring tension may be too high. Refer to "Step 3: Adjust Arm Tension" to decrease support.
• Nosač se čini nestabilnim: Ensure all mounting screws are securely tightened to the wall stud. Verify that the VESA plate screws attaching the monitor are also tight.
• Kablovi su neuredni: Utilize the integrated cable management clips on the arm to route and secure cables.

8. Specifikacije

9. Garancija i podrška

VIVO products are designed for quality and durability. For warranty information, technical support, or assistance with your MOUNT-G100B, please contact VIVO customer service. Our U.S.-based support team is available to help with any questions or concerns you may have.

For more information, visit the official VIVO store: VIVO trgovina