Artemide Tolomeo Mini 100W E26 Sto Lamp Uputstvo za upotrebu

1. Uvod

This manual provides comprehensive instructions for the safe and efficient use of your Artemide Tolomeo Mini 100W E26 Table Lamp. Please read this manual thoroughly before installation and operation, and retain it for future reference. The Artemide Tolomeo Mini is designed for indoor use, offering adjustable illumination with its articulated aluminum arm and shade.

2. Sigurnosne informacije

• Osigurajte lamp is connected to a power source within the specified voltage opseg (120V).
• Do not exceed the maximum bulb wattage of 100W. Use an E26 (medium base) A19 compatible incandescent, compact fluorescent, or LED lamp.
• Always disconnect the power before cleaning, performing maintenance, or replacing the bulb.
• Izbjegavajte postavljanje lamp in areas with excessive moisture or extreme temperatures.
• Ne pokušavajte modificirati lamp's electrical components. Refer servicing to qualified personnel.
• Zadrži lamp dalje od zapaljivih materijala.

3. Sadržaj paketa

Prije početka montaže provjerite da li su sve komponente prisutne:

• Artemide Tolomeo Mini Lamp Arm and Head Assembly
• Aluminijska baza
• Shade
• Kabl za napajanje

Image 3.1: All components of the Artemide Tolomeo Mini Table Lamp, including the articulated arm, lamp head, base, and power cord.

4. Upute za postavljanje

1. Raspakujte komponente: Pažljivo izvadite sve dijelove iz ambalaže i stavite ih na čistu, ravnu površinu.
2. Pričvrstite bazu: Sigurno pričvrstite lamp's articulated arm assembly to the aluminum base. Ensure the connection is firm and stable.
3. Instalirajte žarulju: Insert an E26 (medium base) A19 compatible bulb (not included) into the lamp head socket. Do not exceed 100W.
4. Postavite Lamp: Stavite lamp na stabilnoj, ravnoj površini.
5. Priključite napajanje: Uključite kabl za napajanje u standardnu ​​električnu utičnicu od 120 V.

Image 4.1: The Artemide Tolomeo Mini Table Lamp fully assembled and ready for use.

5. Uputstvo za upotrebu

• Uključivanje/isključivanje: Lamp features an On/Off switch located on the lamp head. Press or touch the switch to turn the light on or off.
• Podešavanje pozicije: Lamp's arm structure, made of extruded aluminum, and joints with tension control knobs allow for full adjustability. Gently manipulate the arm and head to direct light as desired. The shade offers 360-degree rotation.

6. Održavanje

• čišćenje: Isključite lamp from power. Use a soft, dry cloth to wipe down the aluminum surfaces and shade. Avoid abrasive cleaners or solvents.
• Zamjena žarulje: Osigurajte lamp is unplugged and the bulb has cooled completely. Unscrew the old bulb and screw in a new E26 (medium base) A19 compatible bulb, not exceeding 100W.
• Napetost zglobova: The tension control knobs on the joints can be adjusted if the arm becomes too loose or too stiff. Turn clockwise to tighten, counter-clockwise to loosen.

7. Otkrivanje problema

Lamp ne uključuje:

Check if the power cord is securely plugged into the outlet and the lamp. Verify that the bulb is correctly installed and not burnt out. Test the outlet with another device.

Treperenje svjetla:

Ensure the bulb is screwed in tightly. If using an LED bulb, confirm it is dimmable if connected to a dimmer switch (though this lamp has an On/Off switch on the head). Try a different bulb.

Ruka ne drži položaj:

Adjust the tension control knobs on the joints. Tighten them slightly until the arm holds its desired position.

8. Specifikacije

9. Garancija i podrška

For warranty information, product support, or to inquire about replacement parts, please contact Artemide directly through their official website or customer service channels. Specific warranty terms and conditions may vary and are provided by the manufacturer.