Audiolab 6000A Stereo Integrisani AmpKorisnički priručnik za lifier

Uvod

Hvala na kupoviniasing the Audiolab 6000A Stereo Integrated Amplifier. This manual provides essential information for setting up, operating, and maintaining your amplifier to ensure optimal performance and longevity. The Audiolab 6000A is a versatile 100-watt integrated amplifier with built-in Bluetooth connectivity and an ESS 9018K2M DAC, offering a high-quality audio experience.

Sigurnosne informacije

• Napajanje: Osigurajte ampUređaj je spojen na napajanje koje odgovara jačinitage navedeno na jedinici.
• ventilacija: Ne blokirajte ventilacijske otvore. Osigurajte dovoljno prostora oko uređaja za pravilan protok zraka kako biste spriječili pregrijavanje.
• Vlaga: Držite uređaj dalje od vode, vlage i visoke vlažnosti.
• čišćenje: Isključite uređaj iz struje prije čišćenja. Koristite meku, suhu krpu. Ne koristite tekuća ili aerosolna sredstva za čišćenje.
• servisiranje: Za sve servisne radove obratite se kvalifikovanom servisnom osoblju. Ne pokušavajte sami otvarati ili popravljati uređaj.
• plasman: Postavite uređaj na stabilnu, ravnu površinu. Izbjegavajte postavljanje u blizinu izvora toplote ili na direktnu sunčevu svjetlost.

Šta je u kutiji

Prilikom raspakivanja, molimo Vas da provjerite da li su prisutni svi dolje navedeni artikli:

• Audiolab 6000A 100-watt Stereo Integrated Amp/Bluetooth DAC - Silver
• Power Cable
• Korisnički priručnik (ovaj dokument)

Product Overview

Prednja ploča

Slika 1: Prednja strana view of the Audiolab 6000A integrated amplifier, showing the display, control knobs for selection, mode, and volume, and power button.

1. SEL (Selection) Knob: Used to navigate menus and select inputs.
2. Dugme MODE: Used to switch between different operating modes.
3. Zaslon: Shows current input, volume level, and operational status.
4. Dugme za podešavanje jačine zvuka (VOL): Podešava izlaznu jačinu zvuka.
5. Izlaz za slušalice: 6.35 mm priključak za povezivanje slušalica.
6. IC prijemnik: Za signale daljinskog upravljanja.
7. Dugme za napajanje: Uključuje/isključuje uređaj ili ga stavlja u stanje pripravnosti.

Zadnja ploča

Slika 2: Pozadi view of the Audiolab 6000A integrated amplifier, showing various input and output terminals, power inlet, and antenna.

1. Power Inlet & Fuse: Connects to AC power. Includes a fuse holder.
2. Prekidač: Glavni prekidač za napajanje.
3. Izlazi za zvučnike: Binding posts for connecting left and right speakers.
4. Digitalni ulazi (optički/koaksijalni): Za povezivanje digitalnih audio izvora.
5. USB ulaz: For firmware updates (not for audio playback).
6. Bluetooth antena: Za bežičnu Bluetooth vezu.
7. Analog Inputs (AUX1, AUX2, AUX3): RCA inputs for analog audio sources.
8. Phono ulaz: Dedicated RCA input for turntables (MM).
9. Pre-Out: RCA outputs for connecting to an external power amplifier.

Setup

1. Plasman

Place the Audiolab 6000A on a flat, stable surface, ensuring adequate ventilation around the unit. Avoid direct sunlight, heat sources, and areas with high humidity.

2. Povezivanje zvučnika

Connect your passive speakers to the speaker output terminals on the rear panel. Ensure correct polarity (+ to + and - to -) for both left and right channels. Use high-quality speaker cables for optimal sound.

3. Povezivanje audio izvora

• Analogni izvori: Connect CD players, tuners, or other analog devices to the AUX1, AUX2, or AUX3 RCA inputs.
• Gramofon: Connect a turntable with a Moving Magnet (MM) cartridge to the PHONO input.
• Digitalni izvori: Connect digital audio sources like TVs, game consoles, or media streamers to the OPT1, OPT2 (Optical) or COAX1, COAX2 (Coaxial) inputs.

4. Priključak za napajanje

Once all audio connections are made, connect the supplied power cable to the AC inlet on the rear panel and then to a suitable wall outlet. Ensure the main power switch on the rear panel is in the OFF position before connecting.

Operating

1. Uključivanje / isključivanje napajanja

First, ensure the main power switch on the rear panel is in the ON position. Then, press the front panel Power button to turn the unit on or put it into standby mode.

2. Izbor ulaza

Rotirajte SEL knob on the front panel to cycle through available input sources (e.g., AUX1, OPT1, Bluetooth, Phono). The selected input will be displayed on the screen.

3. Kontrola jačine zvuka

Rotirajte VOL knob clockwise to increase volume and counter-clockwise to decrease volume. The current volume level will be shown on the display.

4. Načini rada

The Audiolab 6000A features three distinct operating modes, selectable via the MODE dugme:

• Integrated Mode: Standard amplifier operation, where the pre-amposloboditelj i moć amplifier sections work together.
• Pre-Power Mode: Pre-amplifier section is bypassed, allowing the 6000A to function purely as a power amplifier. Useful when connecting an external pre-amplifier.
• prijeAmpLifier Mode: Moć amplifier section is bypassed, allowing the 6000A to function purely as a pre-amplifier. Useful when connecting an external power amplifier via the Pre-Out terminals.

5. Bluetooth uparivanje

Za uparivanje Bluetooth uređaja:

1. Select the Bluetooth input using the SEL dugme.
2. The display will show "PAIRING" or similar, indicating it's ready to connect.
3. On your mobile device, enable Bluetooth and search for "Audiolab 6000A".
4. Odaberite amplifier from the list to complete pairing. Once connected, the display will confirm.

6. DAC Functionality

The Audiolab 6000A incorporates an ESS 9018K2M DAC, allowing for high-resolution digital audio playback. Connect your digital sources (e.g., CD transport, network streamer) to the optical or coaxial digital inputs to utilize the internal DAC.

Održavanje

• čišćenje: Use a soft, dry, lint-free cloth to clean the exterior of the ampNe koristite abrazivna sredstva za čišćenje, voskove ili rastvarače.
• ventilacija: Periodically check that the ventilation slots are clear of dust and debris.
• Skladištenje: Ako uređaj skladištite duži period, isključite ga iz struje i čuvajte ga na hladnom i suhom mjestu.

Rješavanje problema

Specifikacije

• Model: Audiolab 6000A
• Izlazna snaga: 50W x 2 into 8 Ohms
• DAC: ESS 9018K2M
• Povezivanje: Bluetooth omogućen
• Načini rada: Integrated, Pre-Power, Pre-Amplifier
• Dimenzije proizvoda: 13 x 17.5 x 3.15 inča
• Težina: 21.6 funti
• Voltage: 100 Volts
• Minimalna ponuda Voltage: 15 volti (DC)

Garancija i podrška

For warranty information and technical support, please refer to the warranty card included with your product or visit the official Audiolab webSačuvajte dokaz o kupovini za eventualne reklamacije.

Proizvođač: Audiolab