Sauter Marapi Electric Towel Dryer Radiator User Manual

1. Uvod

Thank you for choosing the Sauter Marapi Electric Towel Dryer Radiator. This manual provides essential information for the safe installation, operation, and maintenance of your appliance. Please read these instructions carefully before use and retain them for future reference.

The Sauter Marapi is designed to provide comfortable heating and efficient towel drying, featuring a powerful blower, an intuitive LCD screen, and programmable settings for optimal energy management.

2. Sigurnosna uputstva

Važno: Failure to follow these safety instructions may result in electric shock, fire, or personal injury.

• This appliance is intended for domestic use only as a towel dryer and supplementary heater.
• Installation must be carried out by a qualified electrician in accordance with local wiring regulations and building codes, especially in bathrooms.
• Do not install the appliance directly below a socket outlet.
• Osigurajte napajanje voltage odgovara naljepnici s karakteristikama na uređaju.
• Do not cover the radiator or blower vents, as this can cause overheating and fire.
• Keep children and pets away from the appliance when it is in operation, as surfaces can become hot.
• Ne uranjajte uređaj u vodu ili druge tečnosti.
• Ako je kabel za napajanje oštećen, mora ga zamijeniti proizvođač, njegov serviser ili slično kvalifikovane osobe kako bi se izbjegla opasnost.
• Ovaj uređaj nije namijenjen za upotrebu od strane osoba (uključujući djecu) sa smanjenim fizičkim, senzornim ili mentalnim sposobnostima, ili nedostatkom iskustva i znanja, osim ako im je dat nadzor ili upute o korištenju uređaja od strane osobe odgovorne za njihovu sigurnost.

3. Proizvod je gotovview

The Sauter Marapi combines a stylish design with practical functionality. Familiarize yourself with the main components:

• grijaći elementi: Horizontal round tubes for towel drying and radiant heat.
• Blower: Located at the bottom, provides rapid heat for quick room warming.
• LCD kontrolna ploča: Displays temperature, mode, and programming settings.
• Kontrolna dugmad: For adjusting settings and navigating menus.

Figure 3.1: Sauter Marapi Electric Towel Dryer Radiator in a bathroom setting. This image shows the radiator mounted on a wall next to a sink and mirror, highlighting its integration into a modern bathroom environment. The radiator features multiple horizontal bars for hanging towels and a control panel on the upper right side.

Slika 3.2: Prednja strana view of the Sauter Marapi Electric Towel Dryer Radiator. This image provides a clear, head-on view uređaja, prikazasing its white finish, numerous round horizontal heating tubes, and the integrated LCD control panel on the right side. Three circular elements are visible at the top.

Slika 3.3: Pod uglom view of the Sauter Marapi Electric Towel Dryer Radiator. This perspective highlights the depth of the radiator and the design of its round heating tubes, which are suitable for hanging and drying towels. The LCD control panel is also visible on the side.

4. Postavljanje i instalacija

The Sauter Marapi radiator must be securely mounted to a wall and connected to the electrical supply. Due to the electrical nature and bathroom environment, professional installation is strongly recommended.

4.1 Montaža

• Choose a suitable wall location, ensuring adequate clearance from water sources (sinks, showers, bathtubs) as per local regulations (e.g., volume zones in bathrooms).
• Use the provided mounting bracket and hardware. Mark the drilling points accurately.
• Drill holes and insert appropriate wall plugs. Secure the mounting bracket firmly to the wall.
• Carefully lift the radiator and attach it to the mounting bracket. Ensure it is level and stable.

4.2 Električni priključak

• Upozorenje: Disconnect power at the main circuit breaker before attempting any electrical work.
• The appliance must be connected to a permanent electrical installation by a qualified electrician.
• Osigurajte pravilno uzemljenje.
• The electrical connection should be protected by a residual current device (RCD) if required by local regulations.

5. Uputstvo za upotrebu

After proper installation and power connection, you can begin operating your Sauter Marapi radiator.

5.1 Uključivanje/isključivanje napajanja

• Pritisnite Snaga button on the control panel to turn the appliance on or off.
• The LCD screen will illuminate when the unit is powered on.

5.2 LCD ekran i kontrole

The LCD screen displays current temperature, operating mode, and programming status. Use the navigation buttons (e.g., Mode, +/-, Prog) to adjust settings.

5.3 Načini rada

Your radiator typically offers several operating modes:

• Udobni način rada: Maintains a set temperature for continuous comfort.
• Eko način rada: Održava nižu temperaturu koja štedi energiju.
• Način zaštite od smrzavanja: Prevents the room temperature from dropping below a critical level (e.g., 7°C).
• Programski način rada: Prati unaprijed postavljeni raspored grijanja.
• Blower Boost Mode: Activates the integrated blower for rapid heating for a set duration (e.g., 15-30 minutes).

Pritisnite Mode button to cycle through available modes. Use the +/- buttons to adjust the target temperature in Comfort or Eco modes.

5.4 Programiranje

The programmable feature allows you to set specific heating schedules for different times of the day and days of the week.

1. Pritisnite Prog dugme za ulazak u režim programiranja.
2. Koristite Mode or arrow buttons to select the day and time segment you wish to program.
3. Koristite +/- buttons to set the desired mode (Comfort, Eco, Off) for that segment.
4. Repeat for all desired time segments and days.
5. Pritisnite Prog again to exit and save the settings.

Refer to the detailed programming section in your full manual for advanced options and specific button functions.

6. Održavanje

Redovno čišćenje osigurava optimalne performanse i produžava vijek trajanja vašeg radijatora.

• čišćenje: Before cleaning, ensure the appliance is switched off and disconnected from the power supply. Allow it to cool completely. Wipe the surfaces with a soft, damp krpom. Ne koristite abrazivna sredstva za čišćenje, rastvarače ili jake hemikalije, jer mogu oštetiti završnu obradu.
• Blower Filter (if applicable): Some models may have a removable filter for the blower. Check your specific model's instructions for cleaning or replacing this filter.
• Opća inspekcija: Periodically check the power cord and plug for any signs of damage. If damage is found, contact a qualified technician for repair.

7. Otkrivanje problema

If you encounter issues with your Sauter Marapi radiator, consult the following table before contacting customer support.

8. Specifikacije

• Brand: Sauter
• Model: Marapi
• Broj modela: 3410532201757
• Vrsta: Electric Towel Dryer Radiator with Blower
• Izlazna snaga: 1750 Watts
• Kontrola: LCD Screen, Programmable
• Težina: Približno 27.25 kg
• ASIN: B07HGPKKJD

9. Garancija i podrška

For warranty information, please refer to the warranty card included with your product or visit the official Sauter webSačuvajte dokaz o kupovini za slučaj reklamacije.

If you require technical assistance, spare parts, or have questions not covered in this manual, please contact Sauter customer support. Contact details can typically be found on the manufacturer's webweb stranici ili na ambalaži vašeg proizvoda.

Sauter Official Webstranica: www.sauter.fr (Molimo provjerite tačan regionalni webstranica za podršku.)