Custom Dynamics PB-45-C Probeam LED Passing Lamps Korisnički priručnik

1. Uvod

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Custom Dynamics PB-45-C 4.5in. Probeam LED Passing Lamps. These modern LED passing lamps are designed to enhance visibility and safety for your motorcycle.

2. Proizvod je gotovview

The Custom Dynamics PB-45-C Probeam LED Passing Lamps feature a modern design with high lumen output for superior illumination. They are engineered for plug-and-play installation on most models.

Ključne karakteristike:

• Modern LED passing lamp dizajn
• Snaga 500 lumena
• Plug and play instalacija
• Vodootporna konstrukcija

Figure 2.1: Custom Dynamics PB-45-C Probeam LED Passing Lamps. Ove lamps feature a sleek, round design with a chrome finish and clear lens, showcasing the internal LED components.

3. Sigurnosne informacije

UPOZORENJE: Ovaj proizvod vas može izložiti hemikalijama, uključujući olovo, za koje je u državi Kalifornija poznato da uzrokuje rak i urođene mane ili druge reproduktivne štete. Za više informacija idite na www.P65Warnings.ca.gov.

Always ensure the vehicle's power is disconnected before installation. Consult a qualified technician if you are unsure about any installation steps. Wear appropriate safety gear during installation.

4. Postavljanje i instalacija

The PB-45-C lamps are designed for plug-and-play installation. Follow these general steps for installation:

1. Ensure the motorcycle's ignition is off and the battery is disconnected to prevent electrical shorts.
2. Carefully remove the existing passing lamps from your motorcycle, if applicable.
3. Connect the Custom Dynamics PB-45-C lamps to the motorcycle's wiring harness. For models manufactured before 2004, an adapter (part number 2001-1266) is required and sold separately.
4. Securely mount the new LED passing lamps in the designated locations.
5. Reconnect the battery and test the functionality of the new lamps.
6. Podesite lamp angle for optimal beam pattern and visibility.

For detailed vehicle-specific instructions, refer to your motorcycle's service manual.

5. Operacija

Once installed, the Probeam LED Passing Lamps operate in conjunction with your motorcycle's existing lighting system. They are designed to provide additional forward and side illumination, enhancing your visibility to other road users and improving your view na putu.

• Turn on your motorcycle's ignition and headlight switch to activate the passing lamps.
• Osigurajte oba lamps illuminate correctly.
• Periodically check the alignment of the lamps to ensure they are providing optimal light distribution without blinding oncoming traffic.

6. Održavanje

The Custom Dynamics PB-45-C LED Passing Lamps require minimal maintenance due to their durable LED technology and waterproof design.

• čišćenje: Očistite sočivo mekom, damp cloth and mild soap. Avoid abrasive cleaners or solvents that could damage the lens or housing.
• inspekcija: Periodically inspect the wiring and connections for any signs of wear, corrosion, or damage. Ensure mounting hardware remains secure.
• Vodootporna brtva: Do not attempt to open the sealed lamp housing, as this will compromise its waterproof integrity and void the warranty.

7. Otkrivanje problema

8. Specifikacije

9. Garancija i podrška

For warranty information and technical support, please contact Custom Dynamics directly. Refer to their official website or the product packaging for the most current contact details and warranty policy.

Webstranica: www.customdynamics.com