1. Uvod
This manual provides comprehensive instructions for the assembly, operation, maintenance, and troubleshooting of the Sealey MCS01 Motorcycle Storage Shed. Please read this manual thoroughly before assembly and use to ensure safe and efficient operation. Keep this manual for future reference.
2. Sigurnosne informacije
UPOZORENJE: Nepoštivanje ovih sigurnosnih uputa može dovesti do ozljeda ili oštećenja proizvoda.
- Prije sastavljanja provjerite jesu li sve komponente prisutne i neoštećene.
- Sastavite na ravnu, stabilnu površinu.
- Do not attempt to assemble in strong winds.
- Secure the shed to the ground using appropriate anchors (not supplied) to prevent tipping in adverse weather conditions.
- Držite podalje djecu i kućne ljubimce tokom sastavljanja.
- Do not store flammable materials or hazardous chemicals inside the shed.
- Regularly inspect the shed for wear and tear, especially after severe weather.
3. Sadržaj paketa
Provjerite da li se u vašem paketu nalaze sve sljedeće komponente:
- Main fabric cover
- Frame tubes (various lengths and shapes)
- Spojevi/konektori
- Pričvršćivači (vijci, matice, podloške)
- Upute za montažu (ovaj priručnik)
Ako neki dijelovi nedostaju ili su oštećeni, odmah kontaktirajte svog dobavljača.
4. Postavljanje (montaža)
Follow these steps carefully for proper assembly of your Sealey MCS01 Motorcycle Storage Shed.
4.1. Priprema lokacije
Choose a level, well-drained area for the shed. Clear any debris, rocks, or sharp objects that could damage the fabric cover.
4.2. Sklop okvira
- Unpack all frame components and lay them out. Refer to the included diagram (if any, otherwise assume general steps).
- Connect the base frame tubes using the appropriate connectors. Ensure all connections are secure.
- Assemble the vertical and roof support tubes, gradually building the frame structure.
- Secure all joints with the provided fasteners, tightening them firmly but not excessively.
4.3. Instalacija poklopca
- Carefully unfold the fabric cover.
- Drape the cover over the assembled frame, ensuring it is centered and aligned correctly.
- Secure the cover to the frame using the integrated straps, buckles, or ties. Ensure a snug fit to prevent flapping in the wind.
- Zip or fasten any closure points on the cover.

Figure 1: The Sealey MCS01 Motorcycle Storage Shed, fully assembled. It features a grey fabric cover stretched over a metal frame, designed to protect a motorcycle from the elements. The front opening is visible, secured by a zipper or similar closure mechanism.
4.4. Ground Anchoring
For optimal stability, especially in windy conditions, it is highly recommended to anchor the shed to the ground. Use ground stakes, sandbags, or other suitable anchoring methods (not included) through the designated anchor points on the base frame.
5. Rad (Upotreba)
The Sealey MCS01 shed is designed for convenient motorcycle storage.
- To open, unfasten the front closure (e.g., zipper, buckles) and lift the front section of the cover.
- Carefully ride or push your motorcycle into the shed. Ensure there is adequate clearance around the motorcycle.
- To close, lower the front section and secure all fasteners to protect the motorcycle from weather and dust.
- Ensure the shed is always closed when not in use to prevent damage from wind or rain.
6. Održavanje
Regular maintenance will extend the life of your storage shed.
- čišćenje: Clean the fabric cover periodically with mild soap and water. Do not use harsh chemicals or abrasive cleaners. Rinse thoroughly and allow to air dry completely before closing.
- inspekcija: Regularly inspect the frame for any signs of rust, bending, or damage. Check all fasteners for tightness.
- Njega pokrivača: If the cover shows signs of wear, tears, or significant fading, consider replacing it to maintain protection.
- Zimljenje: In areas with heavy snowfall, it is recommended to remove snow accumulation from the roof to prevent structural damage. Consider disassembling and storing the shed indoors during prolonged periods of extreme weather.
7. Otkrivanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Shed unstable/wobbly | Not properly anchored; loose frame connections. | Ensure shed is anchored to the ground. Tighten all frame fasteners. |
| Nakupljanje vode na poklopcu | Improper cover tension; frame sag. | Re-tension the cover. Check frame for bending or incorrect assembly. |
| Difficulty opening/closing front | Zipper/fastener obstruction; misaligned frame. | Clear any obstructions. Check frame alignment. Lubricate zippers if necessary. |
8. Specifikacije
| Feature | Detalj |
|---|---|
| Broj modela | MCS01 |
| Brand | Sealey |
| Dimenzije (D x Š x V) | 2700 x 1050 x 1550 mm (cca.) |
| Boja | Grey |
| Težina | 19.02 kg (približno) |
| Materijal | Fabric cover, metal frame |
9. Zvanični videozapisi proizvoda
Trenutno nisu dostupni službeni videozapisi proizvoda od prodavača za ovaj proizvod.
10. Garancija i podrška
For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official Sealey webSačuvajte dokaz o kupovini za slučaj reklamacije.
Sealey Official Webstranica: www.sealey.co.uk





