NZXT AER RGB 2 140mm PWM Fan Instruction Manual

1. Uvod

The NZXT AER RGB 2 140mm PWM fan is designed to provide optimal airflow and advanced lighting customization for your PC. This fan integrates with the Hue 2 ecosystem, allowing synchronization with other Hue 2 accessories for a unified lighting experience. Featuring fluid dynamic bearings and winglet tips, the AER RGB 2 fan offers efficient cooling while minimizing operational noise.

Ključne karakteristike:

• Projektovane performanse: Designed with a chamfered-intake and exhaust to boost overall airflow and pressure.
• Uniquely Shaped Light Guide: Creates stunning visual effects with uniform light dispersion.
• Winglet Tips: Fan blades minimize drag and enhance fan performance.
• Fluid Dynamic Bearing (FDB): Patented copper FDB maintains consistent lubrication, reducing bearing noise and extending lifespan.
• CAM-Powered Customization: Seamless software control for nearly infinite lighting and fan speed customization.

2. Sadržaj paketa

Provjerite da li se sve stavke nalaze u vašem paketu:

• 1 x NZXT AER RGB 2 140mm Case Fan
• 1 x 500mm Fan Connection Cable
• 1 x 50mm Fan-to-Fan Cable
• 1 x 500mm Fan-to-Accessory Cable

3. Specifikacije

4. Postavljanje i instalacija

The NZXT AER RGB 2 fan requires connection to an NZXT Hue 2 controller (sold separately) for RGB lighting and advanced fan control via the NZXT CAM software. Ensure your system is powered off before beginning installation.

Koraci instalacije:

1. Montaža ventilatora: Secure the AER RGB 2 fan to your PC case or radiator using appropriate fan screws. Ensure the fan is oriented correctly for desired airflow (intake or exhaust).
2. Connecting to Hue 2 Controller:
   • Connect the 500mm Fan Connection Cable from the AER RGB 2 fan to an available fan port on your Hue 2 controller.
   • If installing multiple AER RGB 2 fans, use the 50mm Fan-to-Fan Cable to daisy-chain them together. Connect the 'OUT' port of the first fan to the 'IN' port of the next fan.
   • If connecting other Hue 2 accessories, use the 500mm Fan-to-Accessory Cable to connect them to the Hue 2 controller.
3. Priključak za napajanje: Connect the 3-pin power connector from the fan to an available fan header on your motherboard or a fan controller.
4. Upravljanje kablovima: Route cables neatly to ensure proper airflow within your PC case.

5. Operating the Fan and RGB Control

The NZXT AER RGB 2 fan's lighting and speed are controlled through the NZXT CAM software, provided you have a compatible Hue 2 controller connected.

Korištenje NZXT CAM softvera:

1. Download and Install CAM: Download the latest version of NZXT CAM software from the official NZXT webstranica (www.nzxt.com/cam). Install it on your computer.
2. Launch CAM: Open the NZXT CAM software. It should automatically detect your connected Hue 2 controller and AER RGB 2 fans.
3. Customize Lighting: Navigate to the 'Lighting' section within CAM. Here you can select from various preset lighting effects, adjust colors, brightness, and speed. You can also create custom lighting profiles.
4. Control Fan Speed: In the 'Cooling' or 'Fan Control' section, you can monitor fan speeds and temperatures. Adjust fan curves based on your system's thermal performance needs, choosing between silent, performance, or custom modes.
5. Synchronize Effects: If you have multiple Hue 2 devices, CAM allows you to synchronize lighting effects across all connected components for a cohesive aesthetic.

6. Održavanje

Regular maintenance helps ensure optimal performance and longevity of your NZXT AER RGB 2 fan.

čišćenje:

• Uklanjanje prašine: Periodically clean dust from the fan blades and frame using compressed air or a soft, dry cloth. Ensure the fan is powered off and disconnected from the system before cleaning.
• Izbjegavajte tečnosti: Do not use liquid cleaners or immerse the fan in water.

7. Otkrivanje problema

If you encounter issues with your NZXT AER RGB 2 fan, refer to the following common solutions:

• Ventilator se ne okreće:
  • Check all power and signal cable connections to the fan and Hue 2 controller.
  • Ensure the fan header on your motherboard or controller is functioning correctly.
  • Verify fan speed settings in NZXT CAM software are not set to 0 RPM or a very low threshold.
• RGB rasvjeta ne radi:
  • Confirm the fan is properly connected to the Hue 2 controller.
  • Ensure the Hue 2 controller is powered and recognized by NZXT CAM.
  • Update NZXT CAM software to the latest version.
  • Check for any conflicting RGB software running on your system.
• Pretjerana buka:
  • Check for any obstructions (cables, debris) hitting the fan blades.
  • Provjerite da je ventilator sigurno montiran i da ne vibrira u odnosu na kućište.
  • Adjust fan speed settings in NZXT CAM to a lower RPM if noise is a concern.

8. Garancija i podrška

NZXT products are covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the official NZXT webweb-mjesto ili garantni list koji dolazi s vašim proizvodom.

Korisnička podrška:

If you require further assistance or have questions not covered in this manual, please visit the official NZXT support page:

www.nzxt.com/support

You can find FAQs, troubleshooting guides, and contact information for technical support.