1. Uvod
This manual provides essential information for the safe and efficient operation of your APC by Schneider Electric Smart-UPS SMX2200RMLVUS. This Uninterruptible Power Supply (UPS) is designed to provide intelligent and efficient network power protection, making it ideal for supporting critical equipment such as servers, point-of-sale devices, routers, switches, and hubs.
Figure 1: APC Smart-UPS SMX2200RMLVUS 2.2kVA Tower/Rack Mountable UPS. This image displays the front view of the black UPS unit, featuring a perforated grille on the left and a digital display with control buttons on the right. Rack-mounting ears are visible on both sides.
2. Postavljanje i instalacija
Follow these steps to properly set up your UPS unit:
- Raspakivanje: Carefully remove the UPS and all accessories from the packaging. Inspect for any shipping damage.
- plasman: Position the UPS in a clean, dry, and temperature-controlled environment. Ensure adequate airflow around the unit. This model is designed for both tower and rack-mountable configurations.
- Povezivanje baterije: Connect the internal battery pack. Refer to the quick-start guide for specific instructions on connecting the battery terminals, as this may vary by unit.
- External Battery Packs (Optional): If using external battery packs, ensure they are properly connected. The UPS features auto-recognition of external batteries, automatically adjusting runtime calculations.
- Povežite se na Utility Power: Plug the UPS power cord into a grounded 120 Volt AC outlet. Avoid using extension cords.
- Povežite opremu: Plug your critical equipment (servers, networking devices, etc.) into the output receptacles on the rear of the UPS. Ensure the total load does not exceed the UPS capacity.
- Početna naplata: Allow the UPS to charge for at least 24 hours before connecting any critical loads to ensure full battery capacity.
3. Operacija
Understanding the operational features of your Smart-UPS is crucial for optimal performance.
- Uključivanje/isključivanje: Use the power button on the front panel to turn the UPS on or off.
- Zvučni alarmi: The UPS provides audible alarms to notify you of changing utility power and UPS power conditions, such as battery mode, low battery, or overload. Consult the display for detailed information.
- Automatic Voltage Regulacija (AVR): The Boost and Trim AVR feature corrects low and high voltage conditions without using battery power, extending battery life and ensuring stable power to connected equipment.
- Cold-Start Capability: In the event of a complete utility power outage, the UPS can provide temporary battery power to connected equipment, allowing for a graceful shutdown or brief operation.
- Adjustable Voltage Osjetljivost: This feature allows you to adapt the UPS for optimal performance in specific power environments or when operating with a generator.
- Adjustable Voltage-Transfer Points: You can maximize useful battery life by widening the input voltage prozora ili zatezanje izlazne zapreminetage regulation, depending on your power quality needs.
- Automatsko ponovno pokretanje: The UPS automatically starts up connected equipment upon the return of utility power after a shutdown.
4. Održavanje
Redovno održavanje osigurava dugotrajnost i pouzdanost vašeg UPS-a.
- Automatsko samotestiranje: The UPS performs periodic battery self-tests to ensure early detection of a battery that needs replacement.
- Battery Failure Notification: The system provides early-warning fault analysis on batteries, enabling timely preventive maintenance and replacement.
- Disconnected Battery Notification: The UPS will warn you if a battery is not available to provide backup power, indicating a potential connection issue or a severely depleted battery.
- Zamjena baterije: When the battery requires replacement, follow the instructions provided with the replacement battery kit. Always use genuine APC replacement batteries.
5. Otkrivanje problema
Ovaj odjeljak pruža rješenja za uobičajene probleme s kojima se možete susresti pri radu s vašim UPS-om.
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| UPS se ne uključuje | Battery not connected or discharged; No utility power. | Ensure battery is properly connected. Plug UPS into a live utility outlet and allow to charge. |
| UPS neprekidno ili često pišti | Operating on battery; Low battery; Overload condition. | Check utility power. Allow battery to charge. Reduce connected load. |
| Battery failure notification | Battery nearing end of life or faulty. | Zamijenite bateriju. |
| Disconnected battery notification | Internal or external battery connection issue. | Verify all battery connections are secure. |
For more detailed troubleshooting, refer to the full product documentation or contact APC customer support.
6. Specifikacije
Key technical specifications for the APC Smart-UPS SMX2200RMLVUS:
- Broj modela: SMX2200RMLVUS
- Brand: APC kompanije Schneider Electric
- Dimenzije proizvoda: 66.8 cm D x 43.2 cm Š x 8.4 cm V
- Težina artikla: 84.8 funte (38.5 kg)
- Voltage: 120 Volts
- Sastav baterije baterije: Olovna kiselina
- Boja: Crna
7. Garancija i podrška
For warranty information, technical support, or to purchase replacement parts, please visit the official APC by Schneider Electric webstranice ili kontaktirajte njihov odjel za korisničku podršku.
Više informacija i resursa za podršku možete pronaći posjetom APC by Schneider Electric trgovina na Amazonu.
