Suptek MD6864 Quad Monitor Desk Mount User Manual

1. Sigurnosne informacije

Molimo vas da pažljivo pročitate sva uputstva prije instalacije i upotrebe. Sačuvajte ovaj priručnik za buduću upotrebu.

• Kapacitet težine: Ne prekoračujte maksimalnu nosivost od 10 kg po monitoru.
• Veličina ekrana: Compatible with most screens up to 27 inches. Note: Not suitable for three 27-inch curved monitors in a horizontal position.
• VESA kompatibilnost: Supports VESA mounting patterns of 75x75mm and 100x100mm.
• Debljina stola: C-clamp and grommet base options fit desks up to 4 inches (10 cm) thick.
• Ensure all screws are securely tightened before placing monitors on the mount.
• Do not attempt to modify the product. Any modifications may compromise safety and void the warranty.

2. Sadržaj paketa

Verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.

Image: All components included in the Suptek MD6864 package, showing arms, two 40cm poles, manual, plate connection parts, VESA plates, C-clamp, i baza s ušicama.

• Arms (4 units)
• 40cm Poles (2 units)
• VESA Plates (4 units)
• Plate Connection Parts (4 units)
• C-clamp Skupština
• Baza za grommet
• Komplet hardvera (vijci, podloške, odstojnici)
• Allen Wrenches and Spanner
• Uputstvo za upotrebu

3. Podešavanje

3.1. Desk Attachment

The monitor mount offers two installation options: C-clamp or grommet base. Choose the method suitable for your desk.

Image: Diagram showing the overall product size, VESA mounting holes, maximum screen size, weight capacity, and the grommet installation option.

C-Clamp Instalacija:

1. Pričvrstite C-clamp assembly to the bottom of the main pole.
2. Pozicionirajte C-clamp na ivici vašeg stola.
3. Zategnite C-clamp Zavrnite vijke dok nosač ne bude sigurno pričvršćen za stol. Provjerite da je stabilan i da se ne ljulja.

Instalacija baze uloška:

1. Ako vaš sto ima otvor za ušicu, umetnite bazu ušice kroz otvor.
2. Secure the grommet base from underneath the desk using the provided plate and nut.
3. Attach the main pole to the grommet base and tighten securely.

3.2. Monitor Attachment

Each monitor is attached to a VESA plate, which then slides onto the monitor arm.

Image: Diagram illustrating adjustable height, integrated cable management, and the removable VESA plate for easy monitor attachment.

1. Carefully attach a VESA plate to the back of each monitor using the appropriate screws from the hardware kit. Ensure the screws are tightened firmly but do not overtighten.
2. Slide the VESA plate with the attached monitor onto the corresponding monitor arm bracket.
3. Secure the monitor to the arm bracket using the locking screw or mechanism provided.
4. Repeat for all four monitors.

4. Operativni

4.1. Podešavanje položaja monitora

The Suptek MD6864 offers extensive adjustability for optimal viewudobnost.

Image: Detailed diagram showing the various adjustment capabilities including 360° rotation, ±90° swivel for outer arms, ±45° swivel for middle arms, and ±90° tilt for outer arms, and ±45° tilt for middle arms.

• Podešavanje visine: Loosen the collar on the main pole to slide the monitor arms up or down to your desired height. Retighten the collar firmly.
• rotacija: Monitors can be rotated 360° (landscape to portrait orientation).
• Nagib: Outer monitor plates can tilt ±90° up and down. Middle monitor plates can tilt ±45° up and down.
• Okretni: Outer monitor arms can swivel ±90° left and right. Middle monitor arms can swivel ±45° left and right.

Adjust the tension of the joints using the provided Allen wrenches if monitors are too loose or too stiff to move.

4.2. Upravljanje kablovima

Integrated cable clips are provided to keep your workspace tidy.

• Route your power and AV cables through the detachable cable clips located along the monitor arms and the main pole.
• Ensure cables have enough slack to allow for full range of motion of the monitors without strain.

5. Održavanje

Redovno održavanje osigurava dugotrajnost i siguran rad vašeg nosača monitora.

• čišćenje: Obrišite nosač mekom krpomamp tkanina. Izbjegavajte korištenje abrazivnih sredstava za čišćenje ili otapala.
• Periodične kontrole: Povremeno provjeravajte sve vijke i spojeve kako biste bili sigurni da su čvrsto zategnuti. Po potrebi ih ponovo zategnite.
• podmazivanje: No lubrication is required for the moving parts.

6. Otkrivanje problema

If you encounter issues with your Suptek MD6864 monitor mount, refer to the following common problems and solutions.

• Monitors are sagging or uneven:
  This is often due to insufficient tension in the arm joints. Use the provided Allen wrenches to tighten the bolts at the joints of the monitor arms. Adjust gradually until the monitors hold their position firmly.
• Mount feels unstable on the desk:
  Osigurajte C-clamp or grommet base is tightened securely to the desk. Check that the desk thickness is within the specified limits (up to 4 inches).
• Teškoće s podešavanjem položaja monitora:
  If the arms are too stiff, slightly loosen the tension bolts at the joints using the Allen wrenches. If they are too loose, tighten them.
• Monitors do not fit the VESA plate:
  Verify that your monitor's VESA pattern is either 75x75mm or 100x100mm. Ensure you are using the correct screws and spacers from the hardware kit.

7. Specifikacije

8. Garancija

Suptek products are designed and manufactured to high-quality standards. For specific warranty information regarding your MD6864 Quad Monitor Desk Mount, please refer to the warranty card included with your product or contact Suptek customer support directly.

9. Podrška

If you require further assistance or have questions not covered in this manual, please contact Suptek customer support.

• Online podrška: Visit the official Suptek webstranica za često postavljana pitanja i resurse podrške.
• Kontakt informacije: Refer to the product packaging or the Suptek webstranicu za najnovije kontakt podatke korisničke službe.
• Također možete posjetiti Suptek Store on Amazon za više informacija o proizvodu.