E-flite Tail Set: Mini Convergence (EFL9302) Instruction Manual

Uvod

This manual provides essential instructions for the E-flite Tail Set, model EFL9302, specifically designed for the Mini Convergence aircraft. It covers important safety guidelines, installation procedures, maintenance tips, and product specifications to ensure proper use and longevity of your aircraft component.

Sigurnosne informacije

UPOZORENJE:

Pročitajte CIJELI priručnik s uputama kako biste se upoznali s karakteristikama proizvoda prije upotrebe. Nepravilno rukovanje proizvodom može rezultirati oštećenjem proizvoda, lične imovine i uzrokovati ozbiljne ozljede. Ovo je sofisticirani hobi proizvod. Mora se koristiti s oprezom i zdravim razumom te zahtijeva neke osnovne mehaničke vještine. Nesigurno i neodgovorno rukovanje ovim proizvodom može rezultirati ozljedom ili oštećenjem proizvoda ili druge imovine. Ovaj proizvod nije namijenjen za upotrebu od strane djece bez direktnog nadzora odrasle osobe. Nemojte koristiti s nekompatibilnim komponentama niti mijenjati ovaj proizvod na bilo koji način izvan uputa koje je dao Horizon Hobby, LLC. Priručnik za proizvod sadrži upute za sigurnost, rad i održavanje. Neophodno je pročitati i slijediti sve upute i upozorenja u priručniku prije sastavljanja, postavljanja ili upotrebe kako biste ispravno radili i izbjegli oštećenja ili ozbiljne ozljede.

Šta je u kutiji

• Tail Set: Mini Convergence

Postavljanje i instalacija

1. Priprema: Ensure your Mini Convergence aircraft is powered off and the battery is disconnected before beginning installation. Clear your workspace and gather any necessary tools (e.g., small screwdriver, adhesive if required).
2. Remove Existing Tail Components (if applicable): Carefully detach any damaged or old tail components from the aircraft fuselage. Refer to your aircraft's main manual for specific removal instructions.
3. Align New Tail Set: Position the new E-flite Tail Set pieces onto the designated areas of the Mini Convergence fuselage. Ensure proper orientation and alignment with the aircraft's structure. The pieces should fit snugly.
4. Secure the Tail Set: Depending on the aircraft design, secure the tail set using the provided fasteners or recommended adhesive. Apply adhesive sparingly and allow adequate drying time if used. Ensure all connections are firm and stable.
5. Verify Control Surface Movement: Once installed, gently check the movement of any integrated control surfaces (e.g., rudders, elevators) on the tail set. Ensure they move freely and without obstruction. Reconnect the battery and perform a control surface test with your transmitter to confirm correct operation and direction.

Always refer to the complete Mini Convergence aircraft manual for detailed assembly and setup instructions, as this tail set is a replacement part.

Operativna razmatranja

The E-flite Tail Set is a structural and aerodynamic component of your Mini Convergence aircraft. Its operation is integral to the overall flight performance and stability. Once correctly installed, the tail set functions passively to provide lift, stability, and control authority through its associated control surfaces (if any). Ensure all control linkages are properly connected and calibrated before flight.

Održavanje

• Redovni pregled: Before each flight, visually inspect the tail set for any signs of damage, cracks, or loose connections.
• čišćenje: If necessary, gently clean the tail set with a soft, damp cloth. Avoid using harsh chemicals that could damage the foam material.
• Skladištenje: Store the aircraft in a safe place, away from direct sunlight and extreme temperatures, to prevent material degradation.
• Popravak: Minor damage to foam can often be repaired with foam-safe adhesive. For significant damage, replacement of the tail set is recommended.

Rješavanje problema

• Loose Tail Set: If the tail set feels loose after installation, re-check all fasteners or adhesive points. Ensure they are securely attached.
• Incorrect Control Surface Movement: If control surfaces on the tail (e.g., elevator, rudder) do not move correctly, verify that linkages are properly connected to the servos and that the servo directions are correctly set on your transmitter.
• Vidljiva oštećenja: Any visible cracks or deformities should be addressed immediately. Depending on severity, repair with foam-safe glue or replace the component.

Specifikacije

Garancija i podrška

For warranty information, technical support, or replacement parts, please contact Horizon Hobby, LLC, the manufacturer of E-flite products. Refer to their official website or the original aircraft manual for contact details and specific warranty terms applicable to your region.

Horizon Hobby, LLC: www.horizonhobby.com