RICOO R06-F Univerzalni Full-Motion TV zidni nosač - uputstvo za upotrebu

1. Uvod

This manual provides detailed instructions for the safe and proper installation and operation of your RICOO R06-F Universal Full-Motion TV Wall Mount. Please read all instructions carefully before beginning installation. Retain this manual for future reference.

2. Sigurnosne informacije

UPOZORENJE:

Failure to read and follow these instructions can result in serious personal injury, property damage, or voiding of your warranty. If you have any questions, please contact RICOO customer support.

• Osigurajte da zidna konstrukcija može sigurno podnijeti ukupnu težinu nosača i vašeg televizora.
• This mount is designed for installation on solid concrete walls using the included Fischer dowels/plugs. Do not install on drywall or stud walls without proper reinforcement or alternative mounting hardware (not included).
• Do not exceed the maximum weight capacity: 209 lbs (95 kg) for VESA up to 400x400, and 121 lbs (55 kg) for VESA greater than 400x400.
• Always use appropriate safety equipment during installation, including eye protection and gloves.
• Installation requires at least two people.
• Provjerite jesu li svi priključci sigurni prije ponovnog puštanjaasintelevizor.

3. Sadržaj paketa

Verify that all components are present and undamaged before installation. If any parts are missing or damaged, do not proceed with installation and contact customer service.

Slika 1: Gotovoview of the RICOO R06-F TV wall mount components, including the main bracket assembly and Fischer dowels for concrete wall installation.

Paket obično uključuje:

• Sklapanje zidne ploče
• TV Bracket Arms (x2)
• Mounting Hardware (screws, washers, spacers for TV attachment)
• Fischer Dowels/Plugs (for solid concrete walls)
• Uputstvo za upotrebu

4. Postavljanje i instalacija

Follow these steps carefully to ensure a secure and correct installation.

4.1 Provjere prije instalacije

1. Provjerite kompatibilnost TV-a: Ensure your TV's screen size is between 40 and 75 inches and its VESA mounting pattern is within 300x200 to 600x400.
2. Provjerite težinu televizora: Confirm your TV's weight does not exceed 209 lbs (95 kg) for VESA up to 400x400, or 121 lbs (55 kg) for VESA greater than 400x400.
3. Vrsta zida: This mount is specifically designed for solid concrete walls using the provided Fischer dowels. Do not install on drywall or stud walls without consulting a professional or using appropriate alternative hardware.
4. Potrebni alati (nisu uključeni): Drill, stud finder (if applicable), level, measuring tape, pencil, screwdriver, socket wrench.

4.2 Attaching TV Brackets to the TV

1. Pažljivo postavite televizor licem prema dolje na meku, čistu površinu kako biste spriječili oštećenje ekrana.
2. Identifikujte VESA rupe za montažu na poleđini vašeg TV-a.
3. Odaberite odgovarajuće vijke, podloške i odstojnike iz priloženog kompleta hardvera koji odgovaraju montažnim otvorima vašeg televizora.
4. Attach the two vertical TV bracket arms to the back of your TV. Ensure they are centered and securely fastened, but do not overtighten.

4.3 Montiranje zidne ploče na zid

1. Determine the desired height and position for your TV. Use a pencil to mark the top center of where the TV will be.
2. Hold the wall plate assembly against the wall at the desired location. Use a level to ensure it is perfectly horizontal. Mark the drilling points through the holes on the wall plate.
3. Drill pilot holes at the marked locations. For solid concrete walls, use a masonry drill bit of the appropriate size for the Fischer dowels.
4. Insert the Fischer dowels into the drilled holes until they are flush with the wall surface.
5. Align the wall plate with the dowels and secure it to the wall using the provided lag bolts and washers. Tighten all bolts firmly to ensure the wall plate is securely anchored.

Slika 2: The RICOO R06-F mount securely installed on a wall, with a TV attached, showcasing its ability to extend and swivel.

4.4 Vješanje televizora na zidnu ploču

1. With assistance, carefully lift the TV (with the attached brackets) and hook the TV brackets onto the wall plate.
2. Ensure both TV brackets are properly seated and engaged with the wall plate.
3. Locate the safety screws or locking mechanisms on the bottom of the TV brackets. Tighten these to secure the TV to the wall plate and prevent accidental dislodgement.

5. Operating and Adjusting the Mount

The RICOO R06-F mount offers various adjustments for optimal viewing.

Slika 3: Visual representation of the mount's adjustable features, including swivel, tilt, wall distance, and screen rotation.

• Swivel/Pivoting: The mount allows for up to 120 degrees of swivel (60 degrees left, 60 degrees right) if the display width is a maximum of 80cm. Gently push or pull the TV to the desired angle.
• Naginjanje: The TV can be tilted +/-15 degrees (15 degrees up, 15 degrees down). Loosen the tilt adjustment knobs on the TV brackets, adjust to the desired angle, and then re-tighten the knobs to secure the position.
• rotacija: The front plate allows for a rotation of +/-6 degrees. This feature is useful for fine-tuning the horizontal alignment of the TV after installation. Adjust as needed and secure.
• Udaljenost od zida: The mount allows for a variable wall distance from 115mm (retracted) to 545mm (extended). Extend or retract the arms to achieve the desired distance from the wall.

6. Održavanje

Redovno održavanje osigurava dugotrajnost i siguran rad vašeg zidnog nosača za TV.

• čišćenje: Obrišite nosač mekom, suhom krpom. Izbjegavajte abrazivna sredstva za čišćenje ili rastvarače.
• Periodične kontrole: Every few months, check all screws and bolts to ensure they remain tight. Re-tighten if necessary.
• podmazivanje: The moving parts are designed for smooth operation and generally do not require lubrication. If movement becomes stiff, contact customer support.

7. Otkrivanje problema

Ako naiđete na probleme, pogledajte sljedeća uobičajena rješenja.

• TV nije ravan: Use the +/-6 degree rotation feature to adjust the horizontal alignment. Ensure all mounting screws are tightened evenly.
• Nosač se čini labavim: Immediately remove the TV. Re-check all wall mounting bolts and TV bracket screws for tightness. Ensure the wall structure is sound.
• Difficulty adjusting tilt/swivel: Ensure no cables are obstructing movement. For tilt, loosen the adjustment knobs, reposition, and re-tighten.
• TV ne odgovara nosaču: Verify your TV's VESA pattern and weight against the specifications in this manual. If incompatible, do not attempt to force installation.

8. Specifikacije

Slika 4: Detailed technical drawing illustrating the dimensions and adjustable ranges of the RICOO R06-F mount.

Slika 5: Illustration of the dual-arm design and corresponding weight capacities based on VESA mounting patterns.

Slika 6: Visual guide to the compatible screen sizes and VESA mounting patterns for the RICOO R06-F TV wall mount. Note: The product specifications state compatibility for 40-75 inch TVs and VESA 300x200 to 600x400.

9. Korisnička podrška

For technical assistance, missing parts, or warranty inquiries, please contact RICOO customer support through their official webweb-mjestu ili prodavaču gdje je proizvod kupljen.