FEIT Electric BPMR16/GU10/930CA MR16 LED Bulb User Manual

1. Uvod

Thank you for choosing the FEIT Electric BPMR16/GU10/930CA MR16 LED Bulb. This manual provides essential information for the safe installation, operation, and maintenance of your new LED bulb. Please read these instructions carefully before use and retain them for future reference.

This MR16 LED bulb is designed for various lighting applications, offering energy efficiency and a long lifespan. It features instant full brightness and is suitable for damp lokacijama.

Image: The FEIT Electric BPMR16/GU10/930CA MR16 LED Bulb, showcasing its compact design and GU10 base.

2. Sigurnosne informacije

Always follow basic safety precautions when installing or replacing light bulbs to reduce the risk of fire, electric shock, or personal injury.

• UPOZORENJE: Risk of electric shock. Do not open. Contains no user-serviceable parts.
• Isključite napajanje prije pregleda, instalacije ili uklanjanja.
• Do not use where directly exposed to water. Suitable for damp lokacijama.
• Ovaj uređaj nije namijenjen za upotrebu sa izlazima za nuždu ili svjetlima za nuždu.
• Do not use with standard dimmers unless specifically stated as dimmable. This bulb is dimmable. Ensure your dimmer is compatible with LED technology.
• Ne postavljajte sijalicu mokrim rukama ili kada stojite na mokrom ili damp površine.
• Ensure the bulb is securely fastened in the fixture.

3. Postavljanje i instalacija

This LED bulb is designed for easy installation into compatible GU10 base fixtures.

1. Isključite napajanje: Before attempting any installation, ensure the power to the light fixture is completely turned off at the circuit breaker or fuse box.
2. Uklonite staru sijalicu: Allow the old bulb to cool completely before carefully removing it from the fixture. For GU10 bulbs, typically push up and twist counter-clockwise to unlock and remove.
3. Instalirajte novu žarulju: Align the two pins of the FEIT Electric BPMR16/GU10/930CA LED bulb with the holes in the GU10 socket. Push the bulb firmly into the socket and twist clockwise until it locks into place.
4. Vrati snagu: Nakon što je sijalica sigurno instalirana, vratite napajanje rasvjetnog tijela na prekidaču.
5. Test: Uključite prekidač za svjetlo kako biste provjerili da li sijalica ispravno funkcionira.

If the bulb does not light up, ensure it is properly seated in the socket and that power is restored to the fixture.

4. Uputstvo za upotrebu

The FEIT Electric BPMR16/GU10/930CA LED Bulb operates like a standard light bulb once installed.

• Uključivanje/isključivanje: Use the existing light switch connected to your fixture to turn the bulb on or off. The bulb will instantly turn on to full brightness.
• Dimming: This bulb is dimmable. If your fixture is connected to a compatible LED dimmer switch, you can adjust the light output. Ensure your dimmer is specifically designed for LED bulbs to avoid flickering or performance issues.
• Upotrebno okruženje: This bulb is suitable for both indoor and outdoor use, including damp locations. Avoid direct exposure to water.

5. Održavanje

The FEIT Electric BPMR16/GU10/930CA LED Bulb requires minimal maintenance.

• čišćenje: Before cleaning, ensure the power to the fixture is turned off and the bulb has cooled. Wipe the bulb with a soft, dry cloth. Do not use liquid or abrasive cleaners.
• Zamjena: With an average life of 25,000 hours, this LED bulb is designed for long-term use. When replacement is eventually needed, follow the installation steps in Section 3.

6. Otkrivanje problema

If you encounter issues with your FEIT Electric LED bulb, refer to the following troubleshooting steps:

• Sijalica ne svijetli:
  • Provjerite je li prekidač za napajanje uključen.
  • Provjerite prekidač ili osigurač.
  • Verify the bulb is securely seated in the GU10 socket. Turn off power, remove, and re-insert the bulb.
  • Testirajte sijalicu u drugoj ispravnoj rasvjetnoj tijela kako biste isključili problem s rasvjetnim tijelom.
• Problemi s treperenjem ili zatamnjivanjem:
  • Ensure your dimmer switch is compatible with LED bulbs. Older incandescent-only dimmers may cause flickering.
  • Provjerite ima li labavih spojeva u uređaju ili prekidaču.
• Bulb Emits Buzzing Noise:
  • This can sometimes occur with incompatible dimmer switches. Try using the bulb without a dimmer or with a different LED-compatible dimmer.

Ako problemi i dalje postoje nakon što slijedite ove korake, obratite se korisničkoj podršci.

7. Specifikacije

Detailed technical specifications for the FEIT Electric BPMR16/GU10/930CA MR16 LED Bulb:

8. Garancija i podrška

garancija: The manufacturer states "No warranty." for this product. Please refer to your retailer's return policy for any initial defects.

Korisnička podrška: For further assistance or inquiries, please contact Feit Electric customer service through their official webweb-mjestu ili prodavaču gdje je proizvod kupljen.