1. Uvod
This manual provides instructions for the installation, operation, and maintenance of the Moxa EDS-208 8-Port Unmanaged Ethernet Switch. The EDS-208 is designed for industrial networking applications, offering reliable 10/100BaseT(X) Ethernet connectivity in a compact, unmanaged form factor.
2. Sigurnosne informacije
- Prije upotrebe uređaja pažljivo pročitajte sva uputstva.
- Osigurajte napajanje voltage is within the specified range for the device. A power supply is not included and must be purchased separately.
- Ne izlažite uređaj vlazi ili ekstremnim temperaturama.
- Samo kvalifikovano osoblje treba da obavlja instalaciju i održavanje.
- Isključite uređaj iz struje prije čišćenja ili servisiranja.
3. Sadržaj paketa
Before installation, verify that the package contains the following items:
- Moxa EDS-208 Unmanaged Ethernet Switch
- Vodič za brzu instalaciju (ako je uključen)
- Garantni list (ako je uključen)
If any of these items are missing or damaged, please contact your sales representative for assistance.
4. Proizvod je gotovview
Slika 1: Moxa EDS-208 Unmanaged Ethernet Switch. This image displays the Moxa EDS-208 unmanaged Ethernet switch. The front panel features eight 10/100BaseT(X) RJ45 ports, numbered 1 through 8. Above the ports, the Moxa logo is visible, along with a 'P' indicator and a power LED. At the top, a green removable terminal block is present for power input. The device has a dark grey plastic housing with ribbed sides for heat dissipation.
4.1. Raspored prednje ploče
- Power Input Terminal Block: Located at the top, a green removable terminal block for connecting the DC power supply.
- Power LED (P): Označava status napajanja uređaja.
- 10/100BaseT(X) Ports (1-8): Eight RJ45 ports for connecting Ethernet devices. Each port supports 10 Mbps or 100 Mbps operation.
- LED diode za vezu/aktivnost: Integrated into each RJ45 port, these LEDs indicate network link status and data activity.
5. Podešavanje
5.1. Montiranje prekidača
The EDS-208 supports DIN-rail mounting. To mount the switch:
- Attach the DIN-rail mounting kit (if not pre-installed) to the rear of the switch.
- Hook the top of the DIN-rail clip over the top edge of the DIN rail.
- Press the switch firmly against the DIN rail until the clip snaps into place.
5.2. Povezivanje napajanja
Important: A power supply is NOT included with the EDS-208 and must be purchased separately. Ensure the power supply meets the device's voltage i trenutni zahtjevi.
- Uvjerite se da je izvor napajanja isključen.
- Connect the positive and negative wires from your DC power supply to the corresponding terminals on the green removable terminal block at the top of the switch. Refer to the terminal block markings for correct polarity.
- Insert the terminal block firmly into its receptacle on the switch.
- Turn on the power source. The 'P' LED on the front panel should illuminate, indicating power is supplied.
5.3. Povezivanje mrežnih uređaja
Connect standard Ethernet cables (Cat5e or better) from your network devices (e.g., computers, servers, other switches) to any of the eight RJ45 ports on the front panel of the EDS-208. The switch automatically detects the speed (10 Mbps or 100 Mbps) and duplex mode of the connected devices.
6. Upravljanje prekidačem
6.1. LED indikatori
The EDS-208 features several LED indicators to provide status information:
- Power LED (P):
- na: Prekidač prima struju.
- Isključeno: Prekidač ne prima napajanje.
- Link/Activity LEDs (per RJ45 port):
- na: Uspostavljena je važeća mrežna veza.
- Treperi: Podaci se prenose ili primaju preko porta.
- Isključeno: Mrežna veza nije uspostavljena.
6.2. Osnovna funkcionalnost
The EDS-208 is an unmanaged switch, meaning it operates automatically without requiring any configuration. It provides basic Ethernet switching functions, including:
- Store-and-Forward Switching: Ensures data integrity by checking for errors before forwarding frames.
- Automatsko pregovaranje: Automatically determines the best speed and duplex mode for each connected device.
- Auto MDI/MDI-X: Automatically detects and adjusts for straight-through or crossover Ethernet cables.
- Broadcast Storm Protection: Helps prevent network congestion caused by excessive broadcast traffic.
7. Održavanje
7.1. Čišćenje
To clean the switch:
- Disconnect power to the device.
- Koristite meku, suhu krpu za brisanje vanjske strane prekidača.
- Ne koristite tečna ili aerosolna sredstva za čišćenje, jer mogu oštetiti uređaj.
7.2. Razmatranja životne sredine
Ensure the switch operates within its specified temperature and humidity ranges. Avoid placing the switch in areas with excessive dust, vibration, or direct sunlight. Proper ventilation is crucial for optimal performance and longevity.
8. Otkrivanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| No power (Power LED off) |
|
|
| No link (Link LED off) |
|
|
| Slow network performance |
|
|
9. Specifikacije
| Feature | Specifikacija |
|---|---|
| Model | EDS-208 |
| Ethernet portovi | 8 x 10/100BaseT(X) RJ45 ports |
| Standardi | IEEE 802.3, 802.3u, 802.3x |
| Brzina prijenosa podataka | 100 megabita u sekundi (maks.) |
| Power Input | Not specified (Power Supply not Included) |
| Current Rating | 0.07 Amps |
| Radna temperatura | -10 do 60°C (14 do 140°F) |
| Temperatura skladištenja | Nije navedeno |
| Vlažnost | Nije navedeno |
| Materijal kućišta | Plastika |
| Dimenzije (D x Š x V) | 3.94 x 1.57 x 3.41 inča (100 x 40 x 86.6 mm) |
| Težina artikla | 1 funta (0.45 kg) |
| Montaža | DIN šina |
10. Jamstvo i podrška
10.1. Informacije o garanciji
Moxa products are covered by a limited warranty. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Moxa webSačuvajte dokaz o kupovini za slučaj reklamacije.
10.2. Tehnička podrška
If you encounter any issues that cannot be resolved using this manual, please contact Moxa technical support. You can find contact information on the official Moxa webstranica (www.moxa.com) ili preko vašeg lokalnog distributera.
