Ergomotion E6 Podesivi krevet Zamjenski daljinski upravljač Korisnički priručnik

Uvod

This manual provides essential instructions for the setup, operation, and troubleshooting of your Ergomotion E6 Adjustable Bed Replacement Remote Control. Please read this manual thoroughly before use to ensure proper functionality and to maximize the lifespan of your remote.

Slika 1: Ergomotion E6 Replacement Remote Control. This image displays the black remote control with various buttons for adjusting head and foot positions, zero gravity, flat, and timer functions. The Ergomotion logo is visible at the bottom left.

Zahtjevi kompatibilnosti

This replacement remote is specifically designed for the Ergomotion E6 adjustable bed model. To ensure compatibility:

Verify that the buttons on this replacement remote exactly match those on your original Ergomotion E6 remote.
Confirm that your existing remote does ne have dip switches numbered one through four or one through six. Remotes with dip switches are not compatible with this model.
Your original remote (the one being replaced) should have a square rubber 'learn' button located above the AAA batteries behind its battery cover. This indicates compatibility with the bed system this replacement remote is designed for.

If your current remote or bed system does not meet these criteria, this replacement remote will not function correctly with your adjustable bed.

Setup and Pairing Instructions

Follow these steps to pair your new Ergomotion E6 replacement remote control with your adjustable bed:

Locate the Control Box: Identify the control box for your adjustable bed. This is typically found underneath the bed frame.
Power Cycle (Optional but Recommended): Unplug the adjustable bed from the power outlet for approximately 30 seconds, then plug it back in. This can help reset the system.
Access the Learn Button: On the control box, locate the square rubber "learn" button. This button is usually small and may be recessed.
Press the Learn Button: Press and hold the "learn" button on the control box for approximately 2-3 seconds. The indicator light on the control box should begin to flash.
Uparite daljinski: Within 10 seconds of the control box light flashing, press and hold any button on your new replacement remote control.
Potvrda: The indicator light on the control box should stop flashing and remain solid, or the bed may briefly move, indicating successful pairing.
Test funkcionalnost: Test all functions of the remote control (Head Up/Down, Foot Up/Down, Flat, Zero G, Timer) to ensure proper operation.

If the remote does not pair on the first attempt, repeat the steps. Ensure the remote has fresh AAA batteries installed.

Upravljanje daljinskim upravljačem

The Ergomotion E6 remote control provides intuitive access to various adjustable bed functions. Refer to the button descriptions below for operation:

HEAD (Up Arrow): Elevates the head section of the bed.
HEAD (Down Arrow): Lowers the head section of the bed.
FOOT (Up Arrow): Elevates the foot section of the bed.
FOOT (Down Arrow): Lowers the foot section of the bed.
Dugme FLAT: Vraća krevet u potpuno ravan položaj.
ZERO G Button: Activates the "Zero Gravity" preset position.
Preset HEAD Button: Activates a pre-programmed head position.
Preset FOOT Button: Activates a pre-programmed foot position.
TIMER/ALL OFF Button: Initiates a timer function or turns off all active bed functions.
10 MIN, 20 MIN, 30 MIN Buttons: Activates a timer for the specified duration, after which the bed may adjust or turn off.
Button with Wave Symbol: Controls a massage or wave function.
Button with Light Bulb Symbol: Controls an integrated light feature.

Note: Specific button functions may vary slightly depending on the exact model of your Ergomotion adjustable bed.

Njega i održavanje

Da biste osigurali dugotrajnost i optimalne performanse vašeg daljinskog upravljača, slijedite ove smjernice:

Zamjena baterije: Replace AAA batteries when the remote's response becomes sluggish or stops working. Ensure correct polarity when inserting new batteries.
čišćenje: Wipe the remote with a soft, dry cloth. Avoid using liquid cleaners, aerosols, or harsh chemicals, as these can damage the remote's electronics and finish.
Skladištenje: Daljinski upravljač čuvajte na suhom mjestu, dalje od ekstremnih temperatura i direktne sunčeve svjetlosti.
Izbjegavajte kapi: Protect the remote from drops and impacts, which can cause internal damage.

Rješavanje problema

If you experience issues with your Ergomotion E6 replacement remote, consult the following troubleshooting steps:

Problem	Mogući uzrok	Rješenje
Daljinski upravljač ne reaguje.	Prazne ili nepravilno umetnute baterije. Daljinski upravljač nije uparen.	Replace batteries with fresh AAA batteries, ensuring correct polarity. Re-attempt the pairing process as described in the "Setup and Pairing Instructions" section.
Bed does not move after pairing.	Incorrect remote model. Interference.	Verify that this remote is the correct model (E6) and that its buttons match your original remote. Ensure no other devices are interfering with the signal. Try unplugging the bed for 30 seconds and re-pairing.
Daljinski upravljač radi povremeno.	Low batteries. Signal obstruction.	Replace batteries. Ensure a clear line of sight between the remote and the bed's control box.
Remote has dip switches.	Incompatible remote model.	This E6 remote is not compatible with beds that use remotes with dip switches (numbered 1-4 or 1-6). You will need a different replacement remote.

If you continue to experience issues after following these steps, please contact Ergomotion customer support for further assistance.

Specifikacije

Feature	Detalj
Broj modela	E6
Brand	Ergomotion Adjustable Bed Remotes
Kompatibilni uređaji	Ergomotion E6 Adjustable Beds
Maksimalni broj podržanih uređaja	1 (Single adjustable bed)
Boja	Crna
Posebna karakteristika	Ergonomski dizajn
Izvor napajanja	AAA baterije (nisu uključene)
Datum prve dostupnosti	30. juna 2018

Korisnička podrška

For further assistance, questions, or to report issues not covered in this manual, please contact Ergomotion customer support. Providing your product model (E6) and a detailed description of the issue will help expedite support.

Note: Contacting the seller directly with compatibility questions before purchase can help avoid restocking fees if the remote is incompatible.

	Vodič za funkcije i upotrebu daljinskog upravljača Ergomotion RF373F Sveobuhvatan vodič za daljinski upravljač Ergomotion RF373F za podesive krevete, s detaljnim opisom svih funkcija, uključujući podizanje glave i nogu, memorijske postavke, Zero-G, masažu, svjetlo za krevet i postupke uparivanja.
	Ergomotion Quest 1.0 Podesiva baza - Uputstvo za upotrebu Comprehensive owner's manual for the Ergomotion Quest 1.0 Adjustable Base, detailing safety precautions, parts identification, installation steps, operation, troubleshooting, and warranty information.
	Ergomotion Series 300 Adjustable Bed Base Owner's Manual Comprehensive owner's manual for the Ergomotion Series 300 adjustable bed base, covering setup, operation, features like massage and remote control, troubleshooting, and maintenance. Includes instructions in English, Spanish, Portuguese, and French.
	Ergomotion RIO 6.0 podesiva baza vlasnički priručnik Sveobuhvatno uputstvo za upotrebu podesive baze Ergomotion RIO 6.0, koje obuhvata instalaciju, rad, sigurnosne smjernice, rješavanje problema i informacije o garanciji.
	Ergomotion Rio 5.0 Adjustable Base Owner's Manual This owner's manual provides detailed instructions for the Ergomotion Rio 5.0 Adjustable Base, covering safety precautions, parts identification, installation steps, remote control operation, Bluetooth setup, and troubleshooting tips.
	Uputstvo za upotrebu i uputstvo za instalaciju podesive baze Ergomotion Quest 2.0 Ovaj priručnik pruža sveobuhvatne upute za podesivu bazu Ergomotion Quest 2.0, koje obuhvataju sigurnosne mjere, popis dijelova, instalaciju, rukovanje daljinskim upravljačem, rješavanje problema i korisničku podršku.

Ergomotion E6