Fujitsu FS-6160ZLA Korisnički priručnik za skener dokumenata

Uvod

This manual provides essential instructions for the safe and efficient operation of your Fujitsu FS-6160ZLA Document Scanner. Please read this manual thoroughly before using the scanner and retain it for future reference. Following these guidelines will ensure optimal performance and longevity of your device.

Product Overview

The Fujitsu FS-6160ZLA is a high-performance document scanner designed for efficient paper handling and digital conversion. It features an Automatic Document Feeder (ADF) for batch scanning and a user-friendly control panel.

Slika 1: Front view of the Fujitsu fi-6130 document scanner, showing the automatic document feeder (ADF) input tray at the top, the control panel on the right, and the output tray at the bottom. The scanner is white and black.

Ključne komponente:

• Automatski ulagač dokumenata (ADF): Za učitavanje više dokumenata za kontinuirano skeniranje.
• Kontrolna tabla: Buttons for various functions including power, scan, and job selection.
• Izlazno ležište: Prikuplja skenirane dokumente.
• USB/Power Ports: Located at the rear for connectivity and power supply.

Setup

1. Raspakivanje: Carefully remove the scanner and all accessories from the packaging. Ensure all components are present: scanner unit, AC adapter, USB cable, and software CD/DVD (if included).
2. plasman: Place the scanner on a stable, flat surface with adequate space for document feeding and output. Ensure proper ventilation.
3. Priključite napajanje: Connect the AC adapter to the scanner's power input and then plug it into a wall outlet.
4. Povežite se na računar:
   • USB veza: Spojite jedan kraj USB kabla na USB port skenera, a drugi kraj na dostupan USB port na računaru.
   • Wi-Fi veza: Refer to the separate network setup guide or the scanner's display (if applicable) for instructions on connecting to your wireless network.
5. Instalacija softvera: Insert the provided software CD/DVD into your computer's drive, or download the latest drivers and scanning software from the official Fujitsu support webstranica. Slijedite upute na ekranu da biste dovršili instalaciju.

Uputstvo za upotrebu

1. Uključeno: Pritisnite Snaga button on the control panel to turn on the scanner. Wait for the scanner to initialize.
2. Učitaj dokumente:
   • Fan the stack of documents to separate pages and align edges.
   • Place documents face-down in the Automatic Document Feeder (ADF) input tray. Adjust the side guides to fit the width of your documents.
   • Ensure documents are within supported sizes (e.g., A4, A5, B5, Letter, Legal).
3. Odaberite postavke skeniranja: Open your scanning software on the computer. Select the desired scan profile, resolution, color mode (e.g., color, grayscale, black & white), and destination folder.
4. Započni skeniranje:
   • Pritisnite Skeniraj/Zaustavi button on the scanner's control panel, or initiate the scan from your computer software.
   • The scanner will feed and scan the documents.
5. Review i sačuvaj: Nakon skeniranja, ponovoview the digitized images on your computer. Save them to your preferred location and format.
6. Funkcije kontrolne table:
   • provjerite: Verifies scanner status or settings.
   • Funkcija: Cycles through predefined scan jobs or settings.
   • Pošalji na: Directs scanned documents to a specific application or destination.
   • Skeniraj/Zaustavi: Starts or stops the scanning process.
   • Snaga: Uključuje ili isključuje skener.

Održavanje

Regular maintenance ensures consistent scan quality and extends the life of your scanner.

• Čišćenje valjaka:
  • Isključite i isključite skener.
  • Open the scanner cover to access the feed rollers.
  • Gently wipe the rollers with a lint-free cloth dampened with isopropyl alcohol or a specialized roller cleaner. Allow to dry completely before closing the cover.
• Čišćenje stakla:
  • Locate the glass scanning surface inside the scanner.
  • Koristite meku krpu koja ne ostavlja dlačice dampened with glass cleaner (non-abrasive) to clean the glass. Avoid spraying cleaner directly onto the glass.
• Eksterijerno čišćenje: Wipe the exterior of the scanner with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Potrošni materijal: Periodically check the condition of feed rollers and separation pads. Replace them as recommended by Fujitsu to maintain optimal performance. Refer to the Fujitsu support webstranica za informacije o zamjenskim dijelovima.

Rješavanje problema

This section addresses common issues you might encounter with your Fujitsu FS-6160ZLA scanner.

• Skener se ne uključuje:
  • Ensure the power cable is securely connected to both the scanner and a working power outlet.
  • Provjerite da li adapter za napajanje ispravno funkcioniše.
• Documents Jamming:
  • Remove all jammed documents carefully, following the scanner's internal guides.
  • Ensure documents are properly fanned and aligned in the ADF.
  • Check for worn-out feed rollers or separation pads and replace if necessary.
  • Avoid loading creased, stapled, or damaged documents.
• Poor Scan Quality (Streaks, Blurs, Dots):
  • Clean the glass scanning surface and feed rollers as described in the Maintenance section.
  • Adjust scan settings (e.g., resolution, brightness) in your scanning software.
  • Osigurajte da su dokumenti čisti i bez prljavštine.
• Scanner Not Detected by Computer:
  • Verify the USB or Wi-Fi connection is secure and active.
  • Restart both the scanner and your computer.
  • Reinstall the scanner drivers and software.
  • Pokušajte s drugim USB portom ili kablom.

Specifikacije

Garancija i podrška

For detailed warranty information, technical support, or to purchase replacement parts and consumables, please visit the official Fujitsu website or contact your local Fujitsu service provider. Keep your purchase receipt as proof of purchase for warranty claims.

Online resursi:

• Fujitsu globalna podrška
• Fujitsu Scanners Product Page