1. Uvod
This manual provides essential information for the safe and efficient use of your Heidelberg Wallbox Home Eco 11 kW Charging Station. Please read this manual thoroughly before installation and operation, and keep it for future reference. The Heidelberg Wallbox Home Eco is designed for reliable, safe, and fast charging of electric and hybrid vehicles equipped with a Type 2 charging socket according to IEC 62196-2 standard.
Image: Heidelberg Wallbox Home Eco 11 kW Charging Station with its integrated charging cable.
Key features of your Wallbox include:
- Brzo punjenje: Up to 11 kW charging power, significantly faster than standard household outlets.
- Kompatibilnost: Suitable for all electric and hybrid vehicles with a Type 2 charging socket (IEC 62196-2).
- Energetska efikasnost: Efficient and energy-saving charging, with a standby mode for reduced power consumption.
- Robustan dizajn: Durable construction suitable for both indoor and outdoor use, featuring a high-quality lacquered metal front.
2. Postavljanje i instalacija
The Heidelberg Wallbox Home Eco must be installed by a qualified electrician or an authorized installation service. This ensures maximum safety and compliance with all quality and safety standards.
2.1 Električni priključak
The Wallbox can be connected to either a 230 Volt (single-phase) or 400 Volt (three-phase) power supply, depending on your electrical infrastructure and vehicle requirements. Consult with your energy provider or electrician to determine the available charging power at your location.
Image: Diagram illustrating the connection process for the Wallbox.
2.2 Montaža
Ensure the mounting surface is stable and capable of supporting the weight of the Wallbox (approximately 16.76 lbs or 7.6 kg). Follow the detailed mounting instructions provided in the separate installation guide for secure attachment.
Image: Heidelberg Wallbox Home Eco securely mounted on a wall, ready for use.
3. Uputstvo za upotrebu
Operating the Heidelberg Wallbox Home Eco is straightforward once installed correctly.
3.1 Charging Your Vehicle
- Provjerite je li vaše vozilo sigurno parkirano i je li kontakt isključen.
- Take the Type 2 charging cable from the Wallbox.
- Insert the charging plug firmly into your vehicle's charging port.
- The Wallbox will automatically begin the charging process. Indicators on the Wallbox will show the charging status.
- Once charging is complete, safely remove the plug from your vehicle and return it to the Wallbox's holder.
Image: Illustration depicting the charging process, emphasizing economic and fast charging.
Image: A man connecting the charging cable to an electric vehicle.
Slika: Krupni plan view of the charging cable connected to a vehicle's charging port.
Image: A woman smiling while connecting the charging cable to her electric vehicle.
3.2 Sigurnosne mjere
- Never attempt to open or repair the Wallbox yourself. Always contact a qualified professional.
- Do not use the Wallbox if the cable or plug is damaged.
- Držite djecu i kućne ljubimce dalje od područja punjenja tokom rada.
- Ensure proper ventilation around the Wallbox, especially if installed in an enclosed space.
4. Održavanje
The Heidelberg Wallbox Home Eco requires minimal maintenance. Regular cleaning and inspection will ensure its longevity and optimal performance.
4.1 Čišćenje
Clean the exterior of the Wallbox with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the surface. Ensure the Wallbox is powered off before cleaning.
4.2 Inspekcija
Periodically inspect the charging cable and plug for any signs of wear, cuts, or damage. Check the Wallbox casing for any cracks or physical damage. If any damage is observed, discontinue use immediately and contact a qualified technician for inspection and repair.
5. Otkrivanje problema
This section addresses common issues you might encounter with your Wallbox. For problems not listed here, or if solutions do not resolve the issue, contact customer support.
5.1 Uobičajeni problemi i rješenja
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Wallbox not charging | Vehicle not properly connected; power supply issue; Wallbox error. | Ensure cable is fully inserted. Check circuit breaker. Consult Wallbox indicator lights for error codes. |
| Punjenje je sporo | Vehicle's charging capacity limit; power supply limitation. | Verify vehicle's maximum charging rate. Ensure Wallbox is connected to appropriate voltage (e.g., 400V for 11kW). |
| Indicator lights show an error | Internal fault; external electrical issue. | Refer to the specific error code in the full technical manual (if available) or contact a qualified electrician. |
5.2 Često postavljana pitanja (FAQ)
- What is the charging power of the Wallbox?
Depending on the vehicle's charging capacity and the power outlet, it can charge up to 11 kW. You can inquire about the available charging power from your energy provider or electrical installer. - Which vehicles can be charged with the Wallbox?
Our Wallboxes can charge all vehicles that have a Type 2 charging socket standardized according to IEC 62196-2. - What type of plug are the Wallboxes equipped with?
The Wallboxes are supplied with a Type 2 charging plug in accordance with DIN EN 62196-2.
6. Specifikacije
Detailed technical specifications for the Heidelberg Wallbox Home Eco (Model: WAB000101):
| Specifikacija | Vrijednost |
|---|---|
| Brand | HEIDELBERG |
| Broj modela | WAB000101 |
| Boja | Srebrna i crna |
| Dimenzije proizvoda | 12D x 29W x 38.5H centimetara |
| Težina artikla | 16.76 funte (otprilike 7.6 kg) |
| Output Voltage | 400 volti (AC) |
| Current Rating | 16 A |
| Maksimalna snaga punjenja | 11 kW |
| Cable Length (for this model) | 3.5 metara |
| Proizvođač | Heidelberger Druckmaschinen AG |
7. Garancija i podrška
For warranty information and customer support, please refer to the documentation included with your product or visit the official Heidelberg website. Heidelberg stands for quality and durability, and their commitment to innovative, customer-oriented solutions has been branded as Amperfied since 2014.
If you require technical assistance, have questions about installation, or need to report a fault, please contact an authorized Heidelberg service partner or a qualified electrician.
Image: The Heidelberg Amperfied brand logo.
