Utilitech A911P-S350A-BZ-PK1

Utilitech 110-Degree 1-Head Bronze Solar Powered Integrated LED Motion-Activated Flood Light with Timer User Manual

Model: A911P-S350A-BZ-PK1

Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of your Utilitech 110-Degree 1-Head Bronze Solar Powered Integrated LED Motion-Activated Flood Light with Timer. This solar-powered floodlight is designed for outdoor security lighting, offering a convenient and energy-efficient solution for illuminating areas such as front yards, backyards, gardens, pathways, and porches. It features an advanced amorphous solar panel for green energy utilization, a dusk-to-dawn sensor to prevent daytime illumination, and a selectable timer for 1 or 3 minutes of light duration.

Sigurnosne informacije

Molimo vas da pročitate i razumjete sva uputstva prije instaliranja ili korištenja ovog proizvoda. Nepoštivanje ovih uputstava može dovesti do strujnog udara, požara ili drugih opasnosti koje mogu uzrokovati materijalnu štetu ili tjelesne povrede.

Sadržaj paketa

Prije početka instalacije provjerite da li su sve komponente prisutne.

Utilitech Solar Flood Light and Solar Panel

Image: The complete Utilitech solar flood light system, showing the LED light unit with motion sensor, the separate solar panel, and the connecting cord.

Karakteristike proizvoda

Postavljanje i instalacija

Follow these steps for proper installation of your solar flood light.

  1. Choose a Location for the Solar Panel: Select an outdoor location for the solar panel that receives at least 6-8 hours of direct sunlight daily. Avoid areas shaded by trees, buildings, or other obstructions. The 20-ft cord allows flexibility in placing the solar panel away from the light unit for optimal sun exposure.
    Utilitech Solar Panel

    Slika: Krupni plan view of the solar panel with its mounting base and connecting cord.

  2. Montirajte solarnu ploču: Use the provided mounting hardware to securely attach the solar panel to a wall or eave. Ensure the panel is angled to maximize sun exposure.
  3. Choose a Location for the Flood Light: Select a desired location for the flood light unit. This can be a wall or eave. Consider the 110-degree motion detection range and the area you wish to illuminate.
    Utilitech Flood Light Unit

    Image: The Utilitech flood light unit, showing the LED light head and the motion sensor at the bottom.

  4. Mount the Flood Light: Securely attach the flood light unit to the chosen surface using the appropriate mounting hardware.
  5. Connect the Solar Panel to the Light Unit: Plug the 20-ft cord from the solar panel into the designated port on the flood light unit. Ensure a secure connection.
    Installed Utilitech Solar Flood Light

    Image: An installed Utilitech solar flood light and solar panel on a wall, demonstrating the connection.

  6. Podesite Lamp Head and Motion Sensor: Loosen the adjustment screws on the lamp head and motion sensor to position them for optimal coverage. Tighten the screws once adjusted.
  7. Početna naplata: Allow the solar panel to charge the batteries for at least 24-48 hours in direct sunlight before initial use to ensure full battery capacity.

Uputstvo za upotrebu

Your Utilitech solar flood light is designed for automatic operation.

Održavanje

Redovno održavanje osigurava optimalne performanse i dugotrajnost vašeg reflektora.

Rješavanje problema

If your flood light is not functioning as expected, refer to the following common issues and solutions.

ProblemMogući uzrokRješenje
Svjetlo se ne pali noću.
  • Nedovoljno napunjenost solarnih panela.
  • Solarni panel je prljav ili začepljen.
  • Dusk-to-dawn sensor detecting ambient light.
  • Batteries are depleted or faulty.
  • Osigurajte da solarni panel prima 6-8 sati direktne sunčeve svjetlosti dnevno.
  • Očistite površinu solarne ploče.
  • Relocate the light or solar panel away from other light sources (e.g., streetlights).
  • Replace batteries (Lowe's item # 605119).
Motion sensor not working or inconsistent.
  • Senzor je začepljen ili prljav.
  • Incorrect sensor angle.
  • Niska napunjenost baterije.
  • Neispravnost senzora.
  • Očistite sočivo senzora.
  • Adjust the sensor angle to cover the desired detection zone.
  • Uvjerite se da su baterije potpuno napunjene ili ih zamijenite.
  • If issues persist after troubleshooting, contact customer support.
Light stays on continuously or flashes.
  • Neispravnost senzora.
  • Interference with the sensor.
  • Check for any objects or environmental factors (e.g., moving branches, small animals) that might be continuously triggering the sensor.
  • Uvjerite se da je senzor čist i bez prepreka.
  • If the problem persists, the sensor may be faulty.
Izlaz svjetlosti je slab.
  • Nedovoljno napunjenost solarnih panela.
  • Batteries are aging or not fully charged.
  • Solarni panel je prljav.
  • Ensure optimal solar panel placement and cleanliness.
  • Allow for a full day of charging.
  • Consider replacing the rechargeable batteries.

Specifikacije

FeatureDetalj
BrandUtilitech
Broj modelaA911P-S350A-BZ-PK1
Light TypeIntegrisana LED reflektorska lampa
Izvor napajanjaSolar Powered
Osvetljenost350 lumena
Temperatura boje5000K (hladno bijelo)
Ugao detekcije pokreta110 stepeni
Domet detekcije pokretaDo 40 stopa
Postavke tajmera1 minute or 3 minutes
Baterije2x 1000 mAh 18500 Lithium Phosphate Solar Rechargeable (included)
Solar Panel Cord Length20 stopa
Vrsta instalacijeWall and Eave Mount
Boja/završna obradaBronza
MaterijalBronza
Težina2.4 lbs
Dimensions (Light Unit)Approx. 8.7" (H) x 7.01" (W) x 2.56" (D)
Nivo vodootpornostiOtporan na vodu
ETL sigurnosna listaDa

Garancija i podrška

For warranty information or technical support, please refer to the product packaging or contact Utilitech customer service directly. Keep your purchase receipt for warranty claims.

Replacement batteries (Lowe's item # 605119) are available for purchase separately.

Povezani dokumenti - A911P-S350A-BZ-PK1

Preview Utilitech Vodič za instalaciju zamjenskog senzora aktiviranog pokretom (GYQ27-W/GYQ27-BZ)
Sveobuhvatni vodič za instalaciju i rad Utilitech zamjenskog senzora aktiviranog pokretom (modeli GYQ27-W, GYQ27-BZ). Uključuje sigurnosne upute, korake instalacije, načine rada i rješavanje problema.
Preview Utilitech Vodič za instalaciju i upotrebu sigurnosnog reflektora aktiviranog pokretom
Sveobuhvatni vodič za instalaciju i rad Utilitech sigurnosnog reflektora aktiviranog pokretom, uključujući sigurnosne informacije, rješavanje problema i održavanje. Sadrži brojeve modela 4891899, 4891900, 7635428412 i 7635428053.
Preview Utilitech LED reflektor s aktivacijom pokreta - vodič za instalaciju i upotrebu
Sveobuhvatni vodič za instalaciju, rukovanje i rješavanje problema s Utilitech LED reflektorom aktiviranim pokretom (Model SE1019). Uključuje sigurnosne upute, sadržaj pakiranja i informacije o garanciji.
Preview Utilitech L-1103-B-001 10-Inch Motion-Activated Magnetic LED Bar Lights Quick Start Guide
Get started with your Utilitech 10-inch battery-powered motion-activated magnetic LED bar lights (Model L-1103-B-001). This guide provides installation, operation, troubleshooting, and safety information.
Preview TM-029 Digitalni zidni tajmer sa 7-dnevnim radnim vremenom: Vodič za instalaciju i programiranje
Detaljne upute za instalaciju i programiranje Utilitech TM-029 ugradbenog digitalnog tajmera za 7 dana. Naučite kako podesiti sat, zakazati dnevne događaje UKLJUČIVANJA/ISKLJUČIVANJA, koristiti automatski, nasumični i ručni način rada i razumjeti specifikacije uređaja.
Preview Utilitech Vodič za instalaciju i upotrebu zamjenskog senzora aktiviranog pokretom
Sveobuhvatni vodič za instalaciju i korištenje Utilitech zamjenskog senzora aktiviranog pokretom (modeli GYQ27-W, GYQ27-BZ), uključujući informacije o sigurnosti, rješavanju problema i garanciji.