Uvod
Thank you for choosing the Ozito Power X Change 18V Cordless Drill Driver. This tool is designed for versatility, allowing you to perform both drilling and screw driving tasks with ease. It is part of the Power X Change cordless system, which means its battery is interchangeable with other Ozito and Einhell tools in the range. This manual provides essential information for safe operation, proper setup, and effective use of your new drill driver.
Sigurnosne informacije
Uvijek se pridržavajte osnovnih sigurnosnih mjera opreza prilikom korištenja električnih alata kako biste smanjili rizik od požara, strujnog udara i tjelesnih ozljeda. Pažljivo pročitajte sva uputstva prije upotrebe.
- Sigurnost radnog područja: Održavajte svoje radno mjesto čistim i dobro osvijetljenim. Nered ili tamna područja mogu uzrokovati nesreće. Ne koristite električne alate u eksplozivnim atmosferama, kao što je prisustvo zapaljivih tekućina, plinova ili prašine.
- električna sigurnost: Izbjegavajte kontakt tijela sa uzemljenim površinama (npr. cijevima, radijatorima, štednjacima, hladnjacima). Ne izlažite električne alate kiši ili vlazi.
- Lična sigurnost: Uvijek nosite zaštitu za oči. Koristite zaštitu za sluh prilikom dužeg rada. Obucite se prikladno; ne nosite široku odjeću ili nakit. Držite kosu, odjeću i rukavice dalje od pokretnih dijelova.
- Upotreba i njega alata: Ne forsirajte električni alat. Koristite odgovarajući električni alat za vašu primjenu. Isključite utikač iz izvora napajanja i/ili izvadite bateriju iz električnog alata prije bilo kakvih podešavanja, promjene pribora ili skladištenja električnog alata.
- Upotreba i održavanje akumulatorskog alata: Punite samo punjačem koji je odredio proizvođač. Koristite električne alate samo sa posebno namijenjenim baterijama.
Product Overview
The Ozito PXDDS-201U is an 18V cordless drill driver designed for a variety of tasks. Key features include:
- Power X Change Compatibility: Shares battery compatibility with all Power X Change tools from Ozito and Einhell.
- Brzostezna glava 13 mm: Allows for quick and easy bit changes with a single sleeve design for one-handed operation.
- Two Gears: Provides optimal speed and torque for different applications.
- Podesiva spojka: Features 18 torque settings for precise screw driving.
- Integrated LED Worklight: Osvjetljava radno područje radi bolje vidljivosti.
- Okidač promjenjive brzine: Offers precise control over drilling and driving speed.
- Funkcija naprijed i nazad: Za uvrtanje i odvrtanje vijaka.
- kopča za pojas: For convenient hands-free portability.
Figure 1: The Ozito Power X Change 18V Cordless Drill Driver (battery not included).
Figure 2: Inserting a drill bit into the 13mm keyless chuck.
Figure 3: Detail of the two-speed gear selector switch.
Setup
- Battery Installation (Battery and Charger Sold Separately):
- Prije prve upotrebe provjerite je li baterija potpuno napunjena.
- Poravnajte baterijski paket s bazom drške bušilice.
- Gurnite baterijski paket u dršku dok ne klikne sigurno na svoje mjesto.
- To remove, press the battery release button(s) and slide the battery pack out.
- Installing/Removing Drill Bits or Driver Bits:
- Rotate the chuck collar counter-clockwise until the chuck jaws are open wide enough to insert the bit.
- U potpunosti umetnite svrdlo ili odvijač u steznu glavu.
- Rotate the chuck collar clockwise to tighten the jaws firmly around the bit. Ensure the bit is centered and secure.
- To remove, rotate the chuck collar counter-clockwise to loosen the jaws and pull the bit out.
Uputstvo za upotrebu
- Selecting Forward/Reverse Rotation:
- The forward/reverse lever is located above the trigger.
- Push the lever to the left for forward rotation (for drilling and driving screws).
- Push the lever to the right for reverse rotation (for removing screws).
- Center the lever to lock the trigger and prevent accidental starting.
- Adjusting Speed (Gears):
- The two-speed gear selector is located on top of the drill.
- Select '1' for low speed, high torque applications (e.g., driving large screws, drilling large holes).
- Select '2' for high speed, low torque applications (e.g., drilling small holes, fast driving).
- Setting Torque (Clutch):
- The torque adjustment collar is located behind the chuck.
- Rotate the collar to select one of the 18 torque settings. Lower numbers are for smaller screws or softer materials, higher numbers for larger screws or harder materials.
- For drilling, set the collar to the drill icon (maximum torque) to bypass the clutch.
- Rukovanje bušilicom:
- Hold the drill firmly with both hands if possible.
- Postavite svrdlo na radni komad.
- Press the variable speed trigger to start the drill. The speed increases as you press the trigger further.
- The integrated LED worklight will illuminate when the trigger is pressed.
Figure 4: Driving screws into a wooden surface.
Figure 5: Drilling into a metal profile.
Održavanje
Redovno održavanje osigurava dugotrajnost i optimalne performanse vaše bušilice-odvijača.
- čišćenje: Održavajte ventilacijske otvore alata čistima kako biste spriječili pregrijavanje. Obrišite kućište alata mekom,amp tkanina. Nemojte koristiti jake hemikalije ili abrazivna sredstva za čišćenje.
- Održavanje stezne glave: Povremeno čistite čeljusti stezne glave kako biste osigurali pravilno hvatanje svrdla.
- Održavanje baterije: Baterije čuvajte na hladnom i suhom mjestu, dalje od direktne sunčeve svjetlosti i ekstremnih temperatura. Ne skladištite baterije u ispražnjenom stanju duži period.
- Skladištenje: When not in use, store the drill driver in a secure, dry place out of reach of children. Remove the battery pack before storage.
Rješavanje problema
If you encounter issues with your drill driver, refer to the following common problems and solutions:
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Bušilica se ne pokreće | Battery not charged or not inserted correctly; Forward/reverse switch in center (locked) position. | Charge battery and ensure it is fully inserted. Move forward/reverse switch to desired direction. |
| Gubitak snage tokom rada | Battery charge is low; Overload protection activated. | Recharge the battery. Reduce pressure on the tool or use a lower gear setting. |
| Bit proklizava u steznoj glavi | Stezna glava nije dovoljno zategnuta; Prihvat bita je prljav ili oštećen. | Ensure chuck is tightened firmly. Clean or replace the bit. |
| Pretjerane vibracije | Bent or damaged drill bit; Loose chuck. | Replace the drill bit. Ensure the chuck is securely tightened. |
If the problem persists after attempting these solutions, please contact Ozito customer support.
Specifikacije
| Specifikacija | Vrijednost |
|---|---|
| Model | PXDDS-201U |
| Battery Voltage | 18V |
| Vrsta baterije | Power X Change Lithium Ion (not included) |
| Veličina Chuck-a | 13mm Keyless, single sleeve |
| Gears | 2 |
| Postavke obrtnog momenta | 18 |
| Maksimalni obrtni moment | 40 Nm |
| Maksimalna brzina bez opterećenja | 1250 o/min |
| Težina mašine | 1.1 kg |
| Dimenzije proizvoda | 21 x 20 x 8 cm |
| Posebne karakteristike | Variable Speed, Integrated LED Worklight |
Garancija i podrška
The Ozito Power X Change 18V Cordless Drill Driver (PXDDS-201U) comes with a 5-year warranty for domestic use. Ova garancija pokriva nedostatke u materijalu i izradi pod normalnom upotrebom.
For warranty claims, technical support, or spare parts, please contact Ozito customer service. Keep your proof of purchase for any warranty claims.
For the most up-to-date contact information and support resources, please visit the official Ozito webweb-mjesto ili pogledajte kontakt podatke navedene na pakovanju vašeg proizvoda.