Product Overview
The ANKO 200 Lumen COB Emergency LED Night Light is a versatile, cordless, and portable lighting solution designed for various applications. It features COB (Chip-on-Board) LED technology for bright, efficient illumination and offers multiple mounting options including magnetic attachment and adhesive stickers. This light is ideal for use in wardrobes, camping, kitchens, garages, attics, and for night reading, providing reliable light during power outages or in areas without direct power access.
Ključne karakteristike
- 200 Lumen COB LED: Provides bright and wide illumination.
- Bežični i prenosivi: Battery-operated for flexible placement and easy transport.
- Više opcija montaže: Includes strong magnets for metal surfaces and adhesive stickers for other flat surfaces.
- Jednostavno rukovanje prekidačem: Easy to turn on and off.
- Izdržljiv dizajn: Suitable for various indoor environments.
Sigurnosne informacije
- Ne izlažite uređaj ekstremnim temperaturama ili direktnoj sunčevoj svjetlosti.
- Ne uranjajte uređaj u vodu ili druge tečnosti.
- Koristite samo navedeni tip baterije i pazite na ispravan polaritet prilikom instalacije.
- Čuvati van domašaja djece.
- Ne pokušavajte rastavljati ili modificirati uređaj. To će poništiti garanciju.
- Izvadite baterije ako uređaj nećete koristiti duži period kako biste spriječili curenje.
Sadržaj paketa
- 1 x ANKO 200 Lumen COB Emergency LED Night Light
- Adhesive Stickers (pre-attached or separate, depending on model variant)
- Korisnički priručnik (ovaj dokument)
- Napomena: Baterije obično nisu uključene i moraju se kupiti zasebno.
Setup
Instalacija baterije
- Locate the battery compartment cover on the back of the light.
- Pomaknite ili otkačite poklopac da biste otvorili pretinac.
- Insert the required number of AAA batteries (typically 3x AAA, check device markings) according to the polarity indicators (+/-) inside the compartment.
- Čvrsto zatvorite poklopac odeljka za baterije.
Opcije montaže
The ANKO LED Night Light offers two primary mounting methods:
Magnetna montaža
- The light has built-in magnets on its back.
- Simply attach the light to any ferrous metal surface, such as a refrigerator, metal cabinet, or tool chest.
- Ensure the surface is clean and dry for optimal magnetic adhesion.
Adhesive Sticker Mounting
- If using the adhesive stickers, ensure the desired mounting surface is clean, dry, and smooth.
- Peel off the protective backing from the adhesive sticker(s) on the back of the light.
- Press the light firmly onto the chosen surface for at least 30 seconds.
- Allow the adhesive to set for a few hours (e.g., 24 hours) before applying significant pressure or repositioning.
Uputstvo za upotrebu
Uključivanje/isključivanje
The ANKO LED Night Light is operated by a simple toggle switch, typically located on the side or front of the unit.
- Da upalim svjetlo ON, slide the switch to the "ON" position.
- Da upalim svjetlo OFF, pomaknite prekidač u položaj "ISKLJUČENO".
Scenariji upotrebe
- Wardrobes/Closets: Mount inside for easy visibility of clothes and items.
- Kitchen Cabinets: Provide extra light under cabinets or inside pantries.
- Garages/Attics: Illuminate dark corners or work areas where wired lighting is unavailable.
- Camping/Outdoor (sheltered): Use as a portable light source in tents or temporary shelters.
- Rasvjeta za hitne slučajeve: Keep readily available for power outages.
- Night Reading: Attach to a headboard or nearby surface for focused light.
Održavanje
Čišćenje
- Wipe the exterior of the light with a soft, dry cloth.
- Ne koristite abrazivna sredstva za čišćenje, rastvarače ili jake hemikalije, jer mogu oštetiti površinu.
- Ensure the light is off and batteries are removed before cleaning.
Zamjena baterije
When the light dims or stops functioning, it is time to replace the batteries.
- Ugasite svjetlo.
- Open the battery compartment as described in the "Battery Installation" section.
- Uklonite stare baterije i odložite ih u skladu sa lokalnim propisima.
- Umetnite nove AAA baterije, pazeći na ispravan polaritet.
- Čvrsto zatvorite odeljak za baterije.
Rješavanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Svjetlo se ne pali. | Baterije su prazne ili nepravilno instalirane. | Zamijenite baterije novima, vodeći računa o ispravnom polaritetu. |
| Svetlo je prigušeno. | Baterije su slabe. | Zamijenite baterije. |
| Light falls off mounting surface. | Surface is not clean, smooth, or suitable for adhesive/magnet. | Clean the surface thoroughly. For adhesive, ensure it's smooth and allow setting time. For magnetic, ensure it's a strong ferrous metal. |
| Switch feels loose or unresponsive. | Problem sa unutrašnjim mehanizmom. | Contact customer support. Do not attempt to repair. |
Specifikacije
| Feature | Detalj |
|---|---|
| Model | B079MDCYM7 |
| Izvor svjetlosti | COB LED |
| Lumen Output | 200 lumena |
| Izvor napajanja | Battery (e.g., 3x AAA, not included) |
| Opcije montaže | Magnetic, Adhesive Sticker |
| Dimenzije | (U ulazu nisu navedene specifične dimenzije, rezervirano mjesto) |
| Težina | (Specifična težina nije navedena u unosu, rezervirano mjesto) |
Garancija i podrška
ANKO products are designed for reliability and performance. For specific warranty details, please refer to the warranty card included with your purchase or visit the official ANKO webSačuvajte račun kao dokaz o kupovini.
If you encounter any issues or have questions regarding your ANKO LED Night Light, please contact our customer support team:
- Email: support@anko.com (Nprample email, actual contact info may vary)
- Telefon: 1-800-XXX-XXXX (Nprample phone, actual contact info may vary)
- Webstranica: www.anko.com (Nprample website, actual contact info may vary)
Please have your model number (B079MDCYM7) and purchase date ready when contacting support.
Important Notes on Media
Slike proizvoda: No useful product images were provided in the source data. The image link provided was a "No image available" placeholder. Therefore, no product images could be embedded in this manual.
Video snimci proizvoda: No official product videos from the seller were found in the provided data. Therefore, no videos could be embedded in this manual.