Shinko R525 Cheater Rear Tire (110/90-19 62M)

Shinko R525 Cheater Rear Tire User Manual

Model: Shinko R525 Cheater Rear Tire (110/90-19 62M)

Marka: Shinko

1. Proizvod je gotovview

The Shinko R525 Cheater Rear Tire is a specialized off-road motorcycle tire designed for extreme single track and hard enduro conditions. It combines the soft, sticky rubber compound found in trials tires with a knobby tread pattern, offering superior traction across a wider range of soil conditions compared to traditional trials tires. This hybrid design aims to improve braking performance and traction in loose soil, making it an ideal choice for challenging off-road environments.

The R525 model excels in looser, loamier soil conditions, providing enhanced confidence for riders navigating demanding terrain.

Shinko R525 Cheater Rear Tire, side view

Slika 1.1: Bočna strana view of the Shinko R525 Cheater Rear Tire, showcasing its aggressive knobby tread pattern.

2. Instalacija i podešavanje

Proper installation of the Shinko R525 Cheater Rear Tire is critical for safety and performance. It is highly recommended that tire installation be performed by a qualified professional using appropriate tools and safety procedures.

2.1 Sigurnosne mjere

2.2 Mounting Instructions (General Guidelines)

  1. Uklonite staru gumu: Deflate the old tire, break the beads, and carefully remove it from the rim.
  2. Pregledajte naplatak: Thoroughly inspect the rim for any damage, cracks, or sharp edges. Clean the rim thoroughly.
  3. podmazati: Apply a generous amount of tire mounting lubricant to both beads of the new Shinko R525 tire and the rim flanges.
  4. Position Tire: Place one bead of the tire over the rim. For the second bead, use tire irons carefully, taking small bites to avoid pinching the inner tube (if applicable) or damaging the tire bead or rim.
  5. Install Inner Tube (if applicable): If using an inner tube, slightly inflate it before inserting it into the tire to prevent pinching.
  6. Naduvati gumu: Slowly inflate the tire, ensuring both beads seat properly on the rim. Listen for two distinct "pops" as the beads seat. Do not exceed the maximum seating pressure indicated on the tire sidewall.
  7. Check Bead Seating: Visually inspect the tire around the entire circumference on both sides to ensure the beads are evenly seated. There should be a uniform line visible just above the rim flange.
  8. Podesite pritisak: Once seated, adjust the tire pressure to the recommended operating pressure for your specific riding conditions and motorcycle.
Close-up of Shinko R525 Cheater Rear Tire tread

Slika 2.1: Krupni plan view of the Shinko R525 Cheater Rear Tire's aggressive tread blocks, designed for maximum grip.

3. Operating Conditions and Performance

The Shinko R525 Cheater Rear Tire is engineered for optimal performance in specific off-road conditions. Understanding its design intent will help maximize its benefits.

3.1 Namenska upotreba

3.2 Karakteristike performansi

Odozgo view of Shinko R525 Cheater Rear Tire tread pattern

Slika 3.1: Od vrha prema dolje view highlighting the unique tread pattern of the Shinko R525 Cheater Rear Tire, optimized for off-road grip.

4. Održavanje

Regular maintenance extends the life of your Shinko R525 Cheater Rear Tire and ensures consistent performance.

4.1 Pritisak u gumama

4.2 Inspekcija

4.3 Čišćenje i skladištenje

Potpuno od vrha prema dolje view of Shinko R525 Cheater Rear Tire

Figure 4.1: Full top-down view of the Shinko R525 Cheater Rear Tire, showing the complete tread pattern from bead to bead.

5. Otkrivanje problema

This section addresses common issues you might encounter with your Shinko R525 Cheater Rear Tire.

IssueMogući uzrokRješenje
Loss of Traction / Poor GripIncorrect tire pressure (too high or too low), worn tread, unsuitable terrain for tire type, suspension issues.Adjust tire pressure to recommended levels for terrain. Inspect tread wear. Ensure tire is suitable for conditions. Check motorcycle suspension.
Neravnomjerno trošenje gazećeg slojaImproper tire pressure, unbalanced wheel, worn suspension components, aggressive riding style.Maintain correct tire pressure. Have wheel balanced. Inspect and service suspension. Adjust riding style.
Česte probušene gumeLow tire pressure, sharp objects in riding area, old or damaged inner tube (if applicable), rim strip issues.Maintain proper tire pressure. Avoid riding over sharp debris. Replace inner tube if damaged. Inspect and replace rim strip. Consider heavy-duty tubes or tubeless conversion if applicable.
Tire Wobble / VibrationImproperly seated bead, unbalanced wheel, damaged tire, bent rim.Re-seat tire bead. Have wheel balanced. Inspect tire for damage. Check rim for trueness. Seek professional assistance if issue persists.

6. Specifikacije

Key technical specifications for the Shinko R525 Cheater Rear Tire (110/90-19 62M):

AtributVrijednost
BrandShinko
ModelR525 Cheater Rear Tire
Veličina gume110/90-19
Ocjena opterećenja62 (Equivalent to 584 lbs / 265 kg)
Speed ​​RatingM (Up to 81 mph / 130 km/h)
Veličina oboda19 inča
Tip gumeOff-road, Hybrid Hard Enduro / Extreme Single Track
AplikacijaPozadi
UPC644978374246
Broj dijela proizvođača87-4328S

7. Informacije o garanciji

Shinko Tires typically come with a limited warranty covering manufacturing defects. Specific warranty terms and conditions may vary by region and product. For detailed warranty information, please refer to the official Shinko Tires website or contact your authorized Shinko dealer. Keep your proof of purchase for any warranty claims.

8. Korisnička podrška

For technical assistance, product inquiries, or support regarding your Shinko R525 Cheater Rear Tire, please contact Shinko Tires customer service or your local authorized dealer. You can usually find contact information on the official Shinko Tires website.

When contacting support, please have your tire's model number (R525 Cheater Rear Tire), size (110/90-19), and any relevant purchase information ready.

Povezani dokumenti - R525 Cheater Rear Tire (110/90-19 62M)

Preview Uputstvo za upotrebu za hibridni snimač Shinko HR-706 (tačkasti tisak)
Ovo sveobuhvatno uputstvo za upotrebu pruža detaljne smernice za hibridni snimač Shinko HR-706. Obuhvata bitne informacije o bezbednom radu, instalaciji, ožičenju, postavkama uređaja, komunikacijskim protokolima, postupcima održavanja, rešavanju uobičajenih problema i tehničkim specifikacijama kako bi se osigurale optimalne performanse i dugotrajnost instrumenta.
Preview Shinko HR-700 シリーズ ハイブリッド記録計:コンパクト、高視認性産業用デーガ
Shinko HR-700シリーズハイブリッド記録計の仕様、特徴,寸法。コンパクト設褈ト設褈徴表示、IP65準拠、産業オートメーション向けの多様な入力オプションを特長としています。
Preview Shinko SIF-600 PLC interfejs jedinica: Uputstvo za upotrebu
Ovo sveobuhvatno uputstvo za upotrebu detaljno opisuje Shinko SIF-600 PLC interfejs jedinicu, obuhvatajući instalaciju, podešavanje, rad i rješavanje problema za primjenu u industrijskoj automatizaciji. Neophodno je za sigurnu i efikasnu upotrebu.
Preview Uputstvo za upotrebu Shinko ACS2 digitalnog indikatorskog kontrolera
Detailed instruction manual for the Shinko ACS2 Digital Indicating Controller, covering installation, wiring, operation, settings, and troubleshooting for industrial temperature control applications.
Preview Uputstvo za upotrebu Shinko QMC1 modula za proširenje komunikacije
Ovo uputstvo za upotrebu pruža sveobuhvatne detalje o Shinko QMC1 modulu za proširenje komunikacije, obuhvatajući njegovu instalaciju, ožičenje, rad, komunikacijske protokole i specifikacije za industrijske kontrolne sisteme. Saznajte više o njegovim karakteristikama, podešavanju i integraciji sa host računarima i PLC-ovima.
Preview WIL-101-TU デジタル指示濁度/SS 計 取扱説明書
SHINKO WIL-101-TU デジタル指示濁度/SS計の取扱説明書。本製品の設置、機能、操作、配線、仕様、校正、通信、およびトラブルシューティングに関する詳細情報を提供します。