VAXCEL Dorado Outdoor Wall Light with Motion Sensor

Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of your VAXCEL Dorado Outdoor Wall Light with Motion Sensor, Model T0387. This fixture is designed for outdoor use, offering enhanced security and convenience with its integrated motion sensor and dusk-to-dawn photocell.

Sigurnosne informacije

• UPOZORENJE: Uvijek isključite napajanje na prekidaču prije početka instalacije ili bilo kakvog održavanja.
• Posavjetujte se s kvalificiranim električarem ako niste sigurni u proces instalacije.
• Osigurajte da su svi spojevi ožičenja sigurni i da su u skladu s lokalnim električnim propisima.
• This product is designed for outdoor, hardwired installation.
• Nemojte prekoračiti maksimalnu snagutage specificirano za sijalicu.
• Please check your local laws and building codes before installing this product.

Šta je u kutiji

Pažljivo raspakujte sadržaj i provjerite da li su svi predmeti prisutni:

• Dorado Outdoor Wall Light Fixture
• Shade
• Montažni hardver
• Uputstvo za upotrebu

Specifikacije

Za detaljne dimenzije, pogledajte dijagram ispod:

Postavljanje i instalacija

Installation of the VAXCEL Dorado Wall Light requires hardwiring to an existing electrical circuit. It is recommended to have this installed by a qualified electrician.

1. Pripremite se za instalaciju: Turn off power at the main circuit breaker to the location where the fixture will be installed.
2. Lokacija montaže: This fixture is designed for wall mount installation. Ensure the mounting surface is structurally sound. Note that a standard electrical box may require a hole cut into the wall for flush mounting.
3. Instalirajte montažni hardver: Secure the provided mounting hardware to the electrical box in the wall.
4. Žične veze: Connect the fixture's wires to your household wiring according to local electrical codes. Typically, this involves connecting the black wire (live) to the black wire, the white wire (neutral) to the white wire, and the ground wire to the ground wire. Use appropriate wire connectors.
5. Pričvrstite učvršćenje: Carefully align the fixture with the mounting hardware and secure it to the wall.
6. Instalirajte žarulju: Insert one E26 medium base bulb (not included) into the socket. Do not exceed 60 watts.
7. Vrati snagu: Nakon što je instalacija završena i sigurna, vratite napajanje na prekidaču.

Uputstvo za upotrebu

The VAXCEL Dorado Wall Light features multiple operational modes for convenience and energy efficiency.

Ključne karakteristike:

• Senzor pokreta: Detects movement within a 180-degree angle and up to 40 feet, automatically turning the light on to full brightness.
• Fotoćelija od sumraka do zore: Automatically turns the light on at dusk and off at dawn, conserving energy during daylight hours.
• Funkcija tajmera: Allows selection of continuous bright light illumination for 0, 3, or 6 hours after dusk.
• Dual-Level Brightness: Features an adjustable low-level standby brightness (0-50%) that increases to 100% upon motion detection.

Prilagodljive postavke:

The fixture offers customizable settings to tailor its operation to your needs. These settings are typically adjusted via internal controls on the fixture itself, or in some models, through a remote control (if included).

• Motion Shut-off Delay: Adjust the duration the light stays on after motion is no longer detected (e.g., 5 seconds to 3 minutes).
• Osetljivost na pokret: Adjust the detection range of the motion sensor (up to 40 feet).
• Early Evening Timer: Set the duration for continuous bright light after dusk (0, 3, or 6 hours) before switching to motion-activated mode or low-level standby.
• Low-Level Standby Brightness: Podesite procenattage of brightness (0-50%) for the standby mode when no motion is detected and the light is on after dusk.

Održavanje

Zamjena žarulje:

Ensure power is turned off at the circuit breaker before replacing the bulb. Allow the bulb to cool completely before handling. This fixture uses one E26 medium base bulb, up to 60 watts.

čišćenje:

To clean the fixture, turn off power at the circuit breaker. Use a soft, damp cloth. Avoid abrasive cleaners or solvents, as they may damage the finish or electrical components. Periodically check for debris accumulation on the motion sensor and photocell to ensure optimal performance.

Rješavanje problema

• Svjetlo se ne pali:
  • Provjerite je li napajanje uključeno na prekidaču.
  • Uvjerite se da je sijalica pravilno postavljena i da nije pregorjela.
  • Verify that the dusk-to-dawn sensor is not obstructed by light or debris.
  • Check motion sensor sensitivity settings.
• Svjetlo ostaje neprekidno upaljeno:
  • Ensure the motion sensor is not continuously detecting movement (e.g., from trees, traffic). Adjust sensitivity if necessary.
  • Check the timer settings; if set to 3 or 6 hours, the light will remain on for that duration after dusk.
  • Verify the dusk-to-dawn sensor is functioning correctly and not in a constantly dark environment.
• Senzor pokreta ne detektuje pokret:
  • Check the motion sensor sensitivity settings and increase if needed.
  • Ensure the sensor lens is clean and free from obstructions.
  • Confirm the sensor's detection range covers the desired area.
• Features not responding as expected:
  • Review the operating instructions carefully to ensure settings are correctly applied.
  • If the fixture has internal adjustment dials or buttons, ensure they are accessible and correctly manipulated.
  • Power cycling the fixture (turning off and on at the breaker) may reset its internal logic.

Garancija i podrška

This VAXCEL product comes with a Limited Warranty. For specific details regarding the warranty period and coverage, please refer to the documentation included with your purchase or contact VAXCEL customer support.

For technical assistance, replacement parts, or further inquiries, please contact VAXCEL customer support through their official webweb-mjesto ili kontakt informacije koje ste dobili uz proizvod.