1. Uvod
The Superior Electronics Simply SUPTLB001 is a universal remote control designed for ease of use and simplicity. It features a self-learning function, allowing it to acquire commands directly from your original remote controls. This remote is capable of controlling up to two different devices, such as a television and a set-top box, making it an ideal solution for consolidating your remote controls. Its design prioritizes large, clearly identifiable buttons for comfortable operation.
2. Značajke proizvoda
- Univerzalna kompatibilnost: Controls a wide range of devices.
- Funkcija samoučenja: Easily acquires commands from existing remote controls.
- Two-Device Control: Manages up to two separate electronic devices.
- Velika dugmad: Designed with oversized, clearly marked buttons for enhanced usability.
- Intuitivni dizajn: Simple layout for straightforward operation.
- Quick Programming: Learning process typically takes less than one minute per button.
3. Podešavanje
3.1. Instalacija baterije
The Superior Electronics Simply SUPTLB001 remote control requires two (2) AAA batteries (not included) for operation.
- Pronađite poklopac odeljka za baterije na poleđini daljinskog upravljača.
- Pomaknite poklopac prema dolje ili pritisnite bravu i podignite da biste ga otvorili.
- Umetnite dvije AAA baterije, pazeći da pozitivni (+) i negativni (-) terminali budu pravilno poravnati s oznakama unutar odjeljka.
- Vratite poklopac pretinca za baterije, gurajući ga nazad na mjesto dok ne klikne sigurno.
Image: Back of the remote control, indicating the battery compartment.
3.2. Learning Function Programming
The Simply SUPTLB001 remote learns functions directly from your original remote controls. You can program any button on the Simply remote to perform a function from your original remote.
- Prepare Remotes: Place the Simply SUPTLB001 remote and your original remote control on a flat surface, facing each other, with their infrared (IR) emitters aligned and approximately 1-3 cm apart.
- Uđite u način učenja: Pritisnite i držite POWER button on the Simply remote for approximately 5 seconds until the red indicator light (usually near the power button) illuminates steadily. This indicates the remote is in learning mode.
- Select Device (A or B): If you are programming for Device A, press the A button. If for Device B, press the B button. The indicator light may flash to confirm selection.
- Select Button to Learn: Press the button on the Simply remote that you wish to program (e.g., V+ for Volume Up). The indicator light will start flashing slowly, waiting for a signal.
- Prijenos signala: Press and hold the corresponding button on your original remote control (e.g., Volume Up) until the indicator light on the Simply remote flashes rapidly three times and then remains steady. This signifies successful learning.
- Ponovite za ostale dugmad: Repeat steps 4 and 5 for all other buttons you wish to program for the current device.
- Exit Learning Mode: Once all desired buttons are programmed, press the POWER button on the Simply remote again to exit learning mode. The indicator light will turn off.
Napomena: If the indicator light flashes rapidly and then turns off without remaining steady, the learning process for that button may have failed. Ensure the remotes are properly aligned and try again. Some original remotes may require a longer press to transmit the signal effectively.
Slika: Front view of the Simply SUPTLB001 remote control.
4. Uputstvo za upotrebu
After successful programming, you can use your Simply SUPTLB001 remote control to operate your devices.
- Odabir uređaja: Pritisnite A button to control the first programmed device or the B button to control the second programmed device. The indicator light may briefly flash to confirm the selected device.
- Uključivanje/isključivanje: Pritisnite POWER dugme za uključivanje ili isključivanje odabranog uređaja.
- Kontrola jačine zvuka: Koristite V+ dugme za povećanje jačine zvuka i V- za smanjenje jačine zvuka.
- Program/Channel Control: Koristite P+ button to go to the next program/channel and P- to go to the previous program/channel.
- AV ulaz: Pritisnite AV button to switch between video input sources on your television.
The functionality of each button depends on how it was programmed during the learning process.
5. Održavanje
- čišćenje: To clean the remote control, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or alcohol, as these can damage the surface.
- Zamjena baterije: Replace batteries when the remote's performance degrades or the indicator light does not respond as expected. Always replace both AAA batteries at the same time with new ones.
- Skladištenje: Daljinski upravljač čuvajte na suhom mjestu, dalje od direktne sunčeve svjetlosti i ekstremnih temperatura.
6. Otkrivanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Daljinski ne radi. | Baterije su prazne ili nepravilno umetnute. | Zamijenite baterije novim AAA baterijama, pazeći na ispravan polaritet. |
| Learning function fails (indicator light flashes rapidly and turns off). | Remotes not aligned, too far apart, or original remote signal is weak. | Ensure remotes are 1-3 cm apart and IR emitters are aligned. Press and hold the original remote button firmly. Try again. |
| Programmed button does not control the device. | Button was not programmed correctly or device selection is wrong. | Re-program the button following the learning instructions. Ensure you have selected the correct device (A or B) before attempting to control it. |
| Domet daljinskog upravljača je slab. | Low batteries or obstruction between remote and device. | Replace batteries. Ensure a clear line of sight between the remote and the device's IR receiver. |
7. Specifikacije
| Brand | Superior Electronics |
| Naziv modela | Jednostavno |
| Broj modela | SUPTLB001 |
| Boja | Crna |
| Tehnologija povezivanja | Infrared (IR) Learning Function |
| Kompatibilni uređaji | Television, other IR-controlled devices |
| Maximum Devices Supported | 2 |
| Broj dugmadi | 10 (Power, A, B, AV, V+, V-, P+, P-) |
| Vrsta baterije | 2 x AAA (not rechargeable) |
| Maksimalni domet | 10 metara (otprilike 33 stopa) |
| Dimenzije (približno) | 16.5 cm (dužina) x 4.5 cm (širina) |
Slika: Sa strane view of the remote control with approximate dimensions.
8. Garancija i podrška
This Superior Electronics Simply SUPTLB001 remote control comes with a manufacturer's warranty of 2 godine od datuma kupovine.
For warranty claims, technical assistance, or further support, please refer to the contact information provided with your purchase documentation or visit the official Superior Electronics webMolimo sačuvajte dokaz o kupovini radi provjere garancije.
