1. Uvod
Thank you for choosing the Oasser P6 Portable Air Compressor Tire Inflator. This device is designed for convenient and efficient inflation of vehicle tires, bicycle tires, and various inflatables. It features a digital pressure gauge for accurate readings, an automatic shut-off function for precise inflation, and an integrated LED light for nighttime use.
Please read this manual thoroughly before operation to ensure safe and proper use of the product. Keep this manual for future reference.
2. Važna sigurnosna uputstva
- Always read and understand all instructions before operating the air compressor.
- This device is designed for use with a 12V DC power source, typically a car cigarette lighter socket.
- For optimal performance and to prevent draining your vehicle's battery, ensure your vehicle's engine is running when using the inflator.
- Do not operate the air compressor continuously for more than 10-15 minutes. Allow the unit to cool down for at least 10 minutes after extended use to prevent overheating.
- Keep the device out of reach of children. This is not a toy.
- Never leave the air compressor unattended during operation.
- Avoid over-inflation. Always refer to the recommended pressure for your tires or inflatables.
- Regularly check tire pressure with a reliable, calibrated pressure gauge. The built-in gauge is for convenience and may have slight variations.
- Do not expose the device to rain or wet conditions. Store in a dry place.
- Ne pokušavajte rastavljati ili modificirati uređaj. Za sve servisne radove obratite se kvalifikovanom osoblju.
3. Sadržaj paketa
Prilikom otvaranja paketa, molimo Vas da provjerite da li su svi artikli prisutni i u dobrom stanju:
- Oasser P6 Portable Air Compressor Tire Inflator
- 12V DC kabl za napajanje (integrisan)
- Various Nozzle Adapters (for balls, bicycles, inflatables)
- Korisnički priručnik (ovaj dokument)
Image: The Oasser P6 air compressor shown with its main unit, attached air hose, 12V power cord, and three different nozzle adapters (two conical, one needle valve) for various inflation needs.
4. Proizvod je gotovview
Familiarize yourself with the components of your Oasser P6 air compressor:
Image: A detailed diagram illustrating the Oasser P6 air compressor from a top-down view i stranu view, with key components numbered and dimensions provided. The main components include the Power Switch Button, LED light, LED Switch Button, 12V Plug with 2.8M Cord, Pressure Valve, Pressure Unit Switch, Pressure Adjust Button, and Digital Display.
- Dugme za uključivanje/isključivanje: Used to turn the compressor on/off.
- LED svjetlo: Pruža osvjetljenje za upotrebu u uslovima slabog osvjetljenja.
- LED prekidač: Aktivira i deaktivira LED svjetlo.
- 12V Plug with 2.8M Cord: Connects the compressor to your vehicle's 12V cigarette lighter socket.
- Tlačni ventil: The nozzle for connecting to tire valves or other inflatables.
- Pressure Unit Switch (M button): Cycles through available pressure units (PSI, BAR, KPA, KG/CM²).
- Pressure Adjust Buttons (+/-): Koristi se za podešavanje željenog ciljnog pritiska.
- Digitalni prikaz: Shows current pressure, target pressure, and selected pressure unit.
5. Podešavanje
Before using your Oasser P6 air compressor, follow these initial setup steps:
- Pokrenite motor vozila: For optimal performance and to prevent battery drain, start your vehicle's engine.
- Priključite napajanje: Insert the 12V power plug into your vehicle's cigarette lighter socket.
- Pripremite crijevo: Uncoil the air hose from its storage slot.
Image: The Oasser P6 air compressor with a transparent overlay showing the internal storage design for the air hose, indicating convenient storage and retrieval.
6. Uputstvo za upotrebu
6.1. Napuhavanje guma
- Povežite se na napajanje: Ensure the compressor is plugged into the 12V cigarette lighter socket and the vehicle engine is running.
- Odaberite jedinicu: Press the 'M' button (Pressure Unit Switch) to cycle through the desired pressure units: PSI, BAR, KPA, or KG/CM².
- Postavite ciljani pritisak: Use the '+' and '-' buttons to set your desired target pressure. The digital display will show the set value.
- Pričvrstite mlaznicu: Screw the air hose nozzle onto the tire valve stem. Ensure a tight connection to prevent air leakage. For Schrader valves, simply press the buckle to fix it.
- Početak inflacije: Press the Power Switch Button to begin inflation. The compressor will start operating, and the digital display will show the increasing-pritisak.
- Automatsko isključivanje: Kompresor će se automatski zaustaviti kada se dostigne unaprijed postavljeni ciljni pritisak.
- Prekini vezu: Unscrew the nozzle from the tire valve and unplug the compressor from the power source.
Image: A visual guide demonstrating the six operational steps: 1. Start the engine, 2. Plug the power cord into the car cigarette lighter, 3. Preset the tire pressure value, 4. Connect the trachea to the tire by pressing the buckle, 5. Press the Power Button to inflate, and 6. The air compressor stops automatically when the preset pressure is reached.
Image: The Oasser P6 air compressor positioned next to a car tire, actively inflating it. A close-up inset shows the secure connection of the inflator's hose to the tire's Schrader valve.
Image: A diagram illustrating the simple process of connecting the inflator's hose to a standard Schrader valve by pressing a buckle, ensuring a secure fit for inflation.
6.2. Korištenje LED svjetla
The Oasser P6 is equipped with a bright LED light for convenience during nighttime or low-light conditions.
- To turn on the LED light, press the LED Switch Button.
- Pritisnite ponovo tipku da isključite svjetlo.
Image: The Oasser P6 air compressor with its integrated LED light actively shining, providing illumination in a dark setting, useful for emergency situations or low-light environments.
6.3. Changing Pressure Units
The digital display allows you to view pressure in four different units:
- PSI (funte po kvadratnom inču)
- KPA (Kilopascals)
- BAR
- KG/CM² (Kilograms per Square Centimeter)
To switch between these units, simply press the 'M' button (Pressure Unit Switch) located below the digital display until your desired unit is shown.
Slika: Krupni plan view of the Oasser P6's LCD digital display, highlighting its ability to show pressure in four optional units (PSI, Bar, KPA, KG/CM²), its accurate tire pressure gauge, and the preset tire pressure with auto-shutoff feature.
6.4. Inflating Other Items
The Oasser P6 comes with various nozzle adapters to inflate a wide range of items:
- Conical Adapters: For small-sized inflatable toys, air mattresses, etc.
- Adapter igličastog ventila: For sports balls (basketballs, footballs, etc.).
To use, select the appropriate adapter, attach it to the inflator's hose, and then connect it to the item you wish to inflate. Follow the same inflation steps as for tires, ensuring you set the correct pressure for the item.
Slika: Prikaz kompozitne slikeasing the versatility of the Oasser P6 air compressor, demonstrating its use for inflating car tires, motorcycle tires, bicycle tires, various inflatables like air mattresses, and sports balls.
7. Održavanje
- čišćenje: Obrišite vanjski dio kompresora mekom,amp krpu. Ne koristite jake hemikalije ili abrazivna sredstva za čišćenje. Prije čišćenja provjerite je li uređaj isključen iz struje.
- Skladištenje: Store the air compressor in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the air hose and power cord are neatly coiled and stored in their designated slots to prevent damage.
- Pregled crijeva i kabela: Periodically inspect the air hose and power cord for any signs of wear, cracks, or damage. Do not use the device if any part is damaged.
8. Otkrivanje problema
If you encounter issues with your Oasser P6, refer to the following common problems and solutions:
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Kompresor se ne uključuje. | No power from 12V socket; loose connection; vehicle engine not running; blown fuse in vehicle or compressor plug. | Ensure 12V plug is fully inserted. Start vehicle engine. Check vehicle's cigarette lighter fuse. Inspect compressor plug for internal fuse (if applicable). |
| Spora inflacija ili nikakva inflacija. | Air hose not securely connected; tire valve stem damaged; target pressure set too low or too high; unit overheating. | Ensure hose is tightly screwed onto valve. Check tire valve for damage. Verify target pressure setting. Allow unit to cool down if it has been running for a long time. |
| Netačno očitavanje pritiska. | Loose connection to tire valve; internal sensor issue. | Ensure a tight seal when connecting to the tire valve. Compare reading with a separate, calibrated tire pressure gauge. |
| Kompresor se neočekivano zaustavlja. | Automatic shut-off reached preset pressure; unit overheated; power interruption. | Check if target pressure was reached. Allow unit to cool down. Verify stable power connection. |
9. Specifikacije
| Feature | Detalj |
|---|---|
| Naziv modela | Oasser P6 |
| Izvor napajanja | 12V DC (via car cigarette lighter) |
| Max Pressure | 150 PSI |
| Jedinice pritiska | PSI, KPA, BAR, KG/CM² |
| Posebne karakteristike | Automatic Shut-Off, Digital LCD Display, LED Light |
| Dužina kabla za napajanje | Otprilike 2.8 metara (110 inča) |
| Dimenzije proizvoda (približno) | 18.5 cm (7.28 inča) x 20 cm (7.87 inča) x 6.0 cm (2.36 inča) |
| Težina artikla | 1.06 kg |
| Uključene komponente | Air Pump, Nozzle Adapters |
10. Garancija i podrška
For information regarding warranty coverage, technical support, or service inquiries, please refer to the warranty card included with your product or contact Oasser customer service directly. Contact details can typically be found on the product packaging or the official Oasser website.
Molimo sačuvajte dokaz o kupovini za bilo kakve reklamacije u vezi s garancijom.
