Audio System CO-600.5 High-Performance 5-Channel Class A/B AmpKorisnički priručnik za lifier

1. Uvod

This user manual provides comprehensive instructions for the installation, operation, and maintenance of your Audio System CO-600.5 High-Performance 5-Channel Class A/B Amplifier. To ensure optimal performance and safety, please read this manual thoroughly before using the product and retain it for future reference.

2. Sigurnosne informacije

General Product Safety according to EU Regulation 2023/2028:

• Observe the manufacturer's instructions and operating instructions for switching off the power supply to the vehicle and in the retrofit products.
• The supply line to the retrofit product must not be longer than 30cm from the operating battery.
• Fasten retrofit devices and accessories properly.
• It is recommended that the retrofit devices/accessories be installed by a specialist workshop. Otherwise, product or vehicle damage and fire can occur.

Always disconnect the vehicle's battery before performing any installation or maintenance work to prevent electrical shock or damage.

3. Proizvod je gotovview

The Audio System CO-600.5 is a high-performance 5-channel Class A/B amplifier designed for car audio systems. It features switchable High-Pass (HP) and Low-Pass (LP) filters, a full active mode, and includes a wired RTC remote control for convenient adjustments. The amplifier supports an input sensitivity range of 0.2V to 6V and includes a high-level RCA input with automatic turn-on capability.

Ključne karakteristike:

• 5-kanalni klasa A/B Amplifier
• Switchable High-Pass (HP) and Low-Pass (LP) Filters
• Full Active Mode
• Wired RTC Remote Control Included
• Input Sensitivity: 0.2V - 6V
• High-Level RCA Input with Auto-On
• Power Output: 4 x 60W RMS (4 Ohm) / 4 x 85W RMS (2 Ohm) and 1 x 250W RMS (4 Ohm mono) / 1 x 350W RMS (2 Ohm mono)

Proizvod Views

Slika 3.1: Vrh view of the CO-600.5 amplifier, highlighting its sleek design and branding.

Slika 3.2: Prednja strana view of the amplifier, displaying the cooling fins.

Slika 3.3: Pozadi view of the amplifier, detailing the power input (GND, REM, +12V) and speaker output terminals.

Figure 3.4: Input and control panel, featuring RCA inputs, gain level adjustments, and crossover frequency controls.

Slika 3.5: Pod uglom view providing a comprehensive look at both connection sides of the amplifier.

4. Postavljanje i instalacija

Pravilna instalacija je ključna za performanse i dugotrajnost vašeg amplifier. It is highly recommended that installation be performed by a qualified professional.

4.1 Lokacija montiranja

• Odaberite suho, dobro prozračeno mjesto, dalje od direktne sunčeve svjetlosti i izvora topline.
• Osigurajte dovoljan protok zraka oko ampza pravilno hlađenje.
• Montirajte ampSigurno pričvrstite podizač na čvrstu površinu koristeći odgovarajući pribor kako biste spriječili pomicanje tokom rada vozila.

4.2 Ožičenje

Prije bilo kakvog povezivanja, odspojite negativni pol akumulatora vozila.

• Napajanje (BATT+): Connect a fused power cable directly from the vehicle's positive battery terminal to the +12V terminal on the amplifier. Ensure the fuse is located within 30cm of the battery.
• Uzemljenje (GND): Connect a ground cable of the same gauge as the power cable to a clean, unpainted metal surface on the vehicle chassis. The connection point must be free of rust and paint.
• Daljinski (REM): Spojite žicu za daljinsko uključivanje s izlaza za daljinsko upravljanje vaše glavne jedinice na REM terminal na amplifier. This will turn the ampuključivanje i isključivanje plamenika pomoću vaše glavne jedinice.
• RCA ulazi: Spojite RCA izlaze vaše glavne jedinice na amplifier's RCA inputs (CH1/2, CH3/4, SUB IN).
• Izlazi za zvučnike: Connect your speakers to the corresponding speaker output terminals (CH1, CH2, CH3, CH4, SUBWOOFER). Observe correct polarity (+ to + and - to -).

5. Uputstvo za upotrebu

Jednom amplifier is correctly installed and wired, you can proceed with initial setup and operation.

5.1 Početno uključivanje

• Ponovo spojite negativni pol akumulatora vozila.
• Uključite glavnu jedinicu. amplifier should power on automatically via the remote wire. The power indicator LED on the ampLampica za snižavanje temperature bi trebala da se upali.

5.2 Podešavanje nivoa pojačanja

The gain control (LEVEL) matches the amplifier's input sensitivity to the output of your head unit. This is not a volume control.

• Postavite amplifier's gain control to minimum (fully counter-clockwise).
• Podesite jačinu zvuka vaše glavne jedinice na oko 75-80% maksimuma.
• Polako povećavajte amplifier's gain control until you hear slight distortion, then back it off slightly until the sound is clear.

5.3 Postavke skretnice (X-OVER)

The CO-600.5 features switchable HP (High-Pass) and LP (Low-Pass) filters for precise sound tuning.

• HPF (High-Pass filter): Allows frequencies above the set point to pass through. Use for full-range speakers to prevent low frequencies that can cause distortion.
• LPF (niskopropusni filter): Allows frequencies below the set point to pass through. Use for subwoofers to prevent high frequencies.
• Adjust the crossover frequencies (e.g., 50Hz-250Hz for HPF, 30Hz-250Hz for LPF) according to your speaker specifications and listening preferences.

5.4 RTC Remote Control

The included wired RTC remote control allows for convenient adjustment of the subwoofer level from the driver's seat.

6. Održavanje

The Audio System CO-600.5 amplifier requires minimal maintenance.

• Zadrži ampČistite uređaj i očistite ga od prašine. Za čišćenje koristite meku, suhu krpu.
• Ensure all connections remain secure. Periodically check wiring for any signs of wear or corrosion.
• Ne koristite jake hemikalije ili abrazivna sredstva za čišćenje na amplifier.

7. Otkrivanje problema

Ako imate problema sa svojim ampspasilac, pogledajte sljedeće uobičajene probleme i rješenja:

If the problem persists after attempting these solutions, please contact Audio System customer support or a qualified car audio technician.

8. Specifikacije

9. Garancija i podrška

For warranty information, please refer to the documentation provided with your purchase or contact your authorized Audio System dealer. Warranty terms and conditions may vary by region and retailer.

For technical support, service, or inquiries regarding spare parts, please contact Audio System customer service directly or visit their official website. Contact information is typically available on the product packaging or the manufacturer's website.

Proizvođač: Audio sistem

Adresa proizvođača: JRS Labs - The Art of Sound, Heinrich-Heine-Straße 13A, 63329 Rödermark