REDARC Smart Start SBI12 12V 100A Uputstvo za upotrebu

1. Uvod

This manual provides comprehensive instructions for the installation, operation, and maintenance of the REDARC Smart Start SBI12 12V 100A Battery Isolator. The SBI12 is a microprocessor-controlled device designed to manage dual battery systems by protecting the primary (start) battery from excessive discharge while allowing the auxiliary battery to power non-essential loads. It functions as a solenoid priority system, ensuring efficient charging of your secondary battery when the vehicle is in motion.

2. Proizvod je gotovview

The REDARC Smart Start SBI12 offers advanced battery management for 12V dual battery systems, providing a continuous rating of 100A. Key features include:

Mikroprocesorska kontrola: Ensures precise management of battery charging and isolation.
Solenoid Priority System: Optimizes charging for the auxiliary battery.
Overmold Design: Provides enhanced durability and protection.
kompaktna veličina: Facilitates easy installation in various vehicle types.
Silver Contacts: Ensures extended lifespan and suitability for marine environments.
Tehnologija uštede energije: Minimizes current draw when in standby.
Indikacija greške: LED indicators provide warnings for conditions such as voltage drops, over-voltage, and excessive current.
Fully Surge Protected: Štiti od strujnih udara.

Unlike diode-type isolators, the SBI12 avoids voltage drop issues, ensuring more efficient power transfer.

3. Sigurnosne informacije

Please read and understand all safety warnings and instructions before installing or operating the REDARC Smart Start SBI12. Failure to do so may result in injury, damage to the product, or damage to your vehicle.

Always disconnect the vehicle's main battery before performing any electrical work.
Ensure all wiring is correctly sized for the current draw and properly fused.
Nosite odgovarajuću ličnu zaštitnu opremu, uključujući zaštitu za oči i rukavice.
Avoid installing the unit in areas exposed to extreme heat, moisture, or corrosive substances unless specifically designed for such environments.
Consult a qualified auto electrician if you are unsure about any aspect of the installation.
This product is designed for 12V DC systems only. Do not connect to other voltage sistemi.

4. Postavljanje i instalacija

Proper installation is crucial for the optimal performance and longevity of your SBI12. The unit should be mounted securely in a dry, well-ventilated area, away from direct heat sources.

4.1 Identifikacija komponente

Slika 4.1.1: Front view of the REDARC Smart Start SBI12 battery isolator, showing the red housing with the REDARC logo and "Designed and manufactured in Australia" text, along with the main terminals and wiring connections.

Slika 4.1.2: Side view of the REDARC Smart Start SBI12, illustrating the compact design and the robust terminals with protective caps.

REDARC Smart Start SBI12 alternate side view

Slika 4.1.3: Druga strana view of the REDARC Smart Start SBI12, highlighting the wiring connections including the ground wire labeled "GND".

4.2 Dijagram ožičenja

The following diagram illustrates a standard installation for the Smart Start SBI12 in a dual battery system.

Smart Start standard installation wiring diagram

Slika 4.2.1: Standard installation wiring diagram for the REDARC Smart Start SBI12. It shows the connection between the start battery and the auxiliary battery via the SBI12, with fuses on both positive lines and ground connections for both batteries and the isolator.

Connect the primary battery positive terminal to one of the main terminals on the SBI12 via a suitably rated fuse.
Connect the auxiliary battery positive terminal to the other main terminal on the SBI12 via a suitably rated fuse.
Connect the thin black wire from the SBI12 to a good chassis ground point.
Ensure all connections are clean, tight, and protected from environmental elements.
Use appropriate gauge wiring for the expected current draw (e.g., #4 pure copper wire for 60A fuse as suggested by a user review, but always refer to specific wiring guidelines for your application).

4.3 Provjere prije instalacije

Verify that both the start and auxiliary batteries are in good condition.
Confirm that the vehicle's charging system is functioning correctly.
Gather all necessary tools and materials, including fuses, wiring, terminals, and mounting hardware.

5. Uputstvo za upotrebu

The REDARC Smart Start SBI12 operates automatically to manage your dual battery system.

Automatic Engagement: When the vehicle's engine is running and the primary (start) battery reaches a sufficient charge level (typically around 13.2V for 12V systems), the SBI12 will automatically engage, connecting the auxiliary battery to the charging system. This allows the auxiliary battery to be charged.
Automatic Disengagement: When the engine is turned off and the primary battery voltage drops below a preset threshold (typically around 12.7V), the SBI12 will disengage, isolating the auxiliary battery. This prevents the auxiliary battery from drawing power from the primary battery, ensuring the primary battery remains charged for starting the vehicle.
Emergency Start/Bridging Function: Some SBI12 models may include a manual override or emergency start feature, allowing you to temporarily bridge the two batteries. Consult your specific product documentation or REDARC support for details on this function if present.
LED indikator: The SBI12 features an LED indicator that provides visual feedback on its operational status and any detected faults. Refer to the troubleshooting section for interpreting LED signals.

6. Održavanje

The REDARC Smart Start SBI12 is designed for minimal maintenance. However, periodic checks are recommended to ensure optimal performance:

Vizuelni pregled: Regularly inspect the unit and all wiring connections for signs of corrosion, damage, or loose terminals.
čistoća: Keep the unit free from dirt, dust, and moisture. Use a dry cloth for cleaning.
Terminal Checks: Ensure all battery terminals and connections to the SBI12 are clean and tight.
Pregled osigurača: Periodically check the fuses in the positive lines to both batteries for continuity and proper rating.

7. Otkrivanje problema

The SBI12 incorporates fault detection and an LED indicator to assist with troubleshooting.

Symptom / LED Indication	Mogući uzrok	Rješenje
SBI12 not engaging (auxiliary battery not charging)	Primary battery voltage prenisko. Labavi ili korodirani spojevi. Pregoreo osigurač. Faulty ground connection.	Check primary battery charge. Inspect and clean all connections. Provjerite i po potrebi zamijenite osigurače. Verify ground connection integrity.
LED indicates fault (e.g., flashing pattern)	Voltage drop detected. Over-voltage stanje. Prekomjerna potrošnja struje. Interna greška.	Check wiring for resistance, ensure proper gauge. Verify vehicle charging system output. Reduce load on auxiliary battery or check for short circuits. Contact REDARC support if issues persist after checking external factors.
SBI12 remains engaged when engine is off	Neispravna jedinica. Neispravno ožičenje.	Provjerite ožičenje u odnosu na dijagram. Contact REDARC support.

For detailed fault code interpretations or persistent issues, refer to the official REDARC documentation or contact their technical support.

8. Specifikacije

Broj modela	SBI12
Brand	REDARC
Voltage	12 volti DC
Continuous Rating	100 Amps
Težina artikla	9.1 unci (približno 258 grama)
Dimenzije paketa	3.7 x 2.99 x 2.95 inča (približno 9.4 x 7.6 x 7.5 cm)
Broj dijela proizvođača	SBI12

9. Garancija i podrška

For specific warranty information, please refer to the documentation provided with your REDARC Smart Start SBI12 or visit the official REDARC website.

If you require technical assistance, have questions about installation, or need help choosing the best dual battery setup for your needs, REDARC offers support resources.

REDARC Support:

Posjetite zvaničnika REDARC Store on Amazon za informacije o proizvodu.
Consult the free REDARC dual battery selector tool (external link, check REDARC website for current URL).
Contact REDARC directly through their official websajt za tehničku podršku.

	REDARC Smart Start SBI Smart Battery Isolator - uputstvo za instalaciju i upotrebu Comprehensive guide to the REDARC Smart Start SBI Smart Battery Isolator, covering product function, safety warnings, installation, wiring diagrams, fault indication, troubleshooting, FAQs, and technical specifications. Essential for multi-battery vehicle systems.
	REDARC Smart Start izolator baterije SBI12, SBI24, SBI212, SBI224 - Priručnik za instalaciju, upotrebu i sigurnost Comprehensive guide for the REDARC Smart Start Battery Isolator, covering models SBI12, SBI24, SBI212, SBI224, and dual sensing variants. Includes specifications, installation instructions, wiring diagrams, fault diagnosis, FAQs, safety precautions, and warranty information.
	REDARC BCDC and SBI Wiring Diagrams for Dual Battery and Jump Start Systems Detailed wiring diagrams for REDARC BCDC1240, BCDC2420, and SBI12 units, illustrating dual battery configurations, parallel/series connections, and 12V/24V jump start setups.
	GPC komplet za montažu za REDARC ALPHA R 50A - INEOS GRENADIER Vodič za instalaciju Detaljan vodič za instalaciju GPC kompleta za montažu REDARC ALPHA R 50A dvostrukog baterijskog sistema, posebno za vozilo INEOS GRENADIER. Uključuje detaljne upute, sigurnosna upozorenja i detalje o puštanju u rad.
	REDARC 12V do 24V jednostruki napontage Pojačivači: VI180D, VI360D, VI720D Korisnički priručnik Ovaj dokument pruža detaljne specifikacije, karakteristike, smjernice za instalaciju i informacije o garanciji za REDARC-ov VI seriju od 12V do 24V jednostruki Vol.tage Pojačivači, uključujući modele VI180D, VI360D i VI720D.
	Uputstvo za instalaciju REDARC ALPHA 50 BCDC-a Vodič za instalaciju kompleta za montažu REDARC ALPHA 50 BCDC sistema sa dva akumulatora, koji pruža detaljne upute, potrebne alate, uključene komponente i smjernice za ožičenje za primjenu u vozilima.

REDARC SBI12