1. Uvod
Thank you for choosing the Brilliant Tanko 96162/06 Outdoor Wall Light with Motion Sensor. This manual provides essential information for the safe installation, operation, and maintenance of your new outdoor lighting fixture. Please read these instructions carefully before installation and retain them for future reference.
2. Sigurnosna uputstva
- električna sigurnost: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Always disconnect power at the main circuit breaker before attempting any installation, maintenance, or bulb replacement.
- Upotreba na otvorenom: This fixture is rated IP44, meaning it is protected against solid objects larger than 1mm and against splashing water from any direction. It is designed for outdoor use only.
- Vrsta žarulje: Use only R7s halogen bulbs with a maximum wattagod 150 W. Prekoračenje maksimalne snagetagmože uzrokovati pregrijavanje i oštećenje uređaja ili stvoriti opasnost od požara.
- Rukovanje: Do not touch the halogen bulb with bare hands during installation or replacement, as oils from your skin can cause premature failure. Use a clean cloth or gloves.
- Montaža: Osigurajte da je površina za montažu strukturno čvrsta i da može podnijeti težinu uređaja.
3. Sadržaj paketa
Molimo provjerite da li su sve komponente prisutne i neoštećene:
- Brilliant Tanko 96162/06 Outdoor Wall Light Unit with Motion Sensor
- Pribor za montažu (vijci, tiple za zid)
- Uputstvo za upotrebu (ovaj dokument)
Note: R7s bulb is typically not included and must be purchased separately.
4. Postavljanje i instalacija
Prije nego počnete: Osigurajte da je napajanje područja instalacije isključeno glavnim prekidačem.
- Pripremite montažnu površinu: Choose a suitable wall location for the fixture. Mark the drilling points for the mounting bracket.
- Montirajte nosač: Drill holes at the marked points and insert the wall plugs. Secure the mounting bracket to the wall using the provided screws.
- Ožičenje: Connect the electrical supply wires to the terminal block inside the fixture. Ensure correct polarity (Live, Neutral, Earth) according to local wiring regulations. Secure all connections tightly.
- Instalirajte žarulju: Carefully insert an R7s halogen bulb (max 150W) into the bulb holder. Avoid touching the glass part of the bulb with bare hands.
- Pričvrstite učvršćivač: Secure the main light unit to the mounted bracket. Ensure it is firmly attached and sealed against the wall to maintain its IP44 rating.
- Adjust Sensor and Light Head: The motion sensor and light head are adjustable. Position them to cover the desired detection area and illumination direction.
Figure 4.1: Brilliant Tanko 96162/06 Outdoor Wall Light with Motion Sensor. This image shows the complete fixture, including the main light housing and the adjustable motion sensor unit mounted below it.
Slika 4.2: Krupni plan view of the R7s bulb socket within the Brilliant Tanko fixture. This illustrates where the R7s halogen bulb should be inserted.
5. Uputstvo za upotrebu
Once installed and power is restored, the Brilliant Tanko 96162/06 will operate as follows:
- Detekcija pokreta: The integrated motion sensor detects movement within its adjustable range. When motion is detected, the light will automatically turn on.
- Trajanje svjetla: The light will remain on for a set period after motion is detected. This duration is typically adjustable via controls on the sensor unit (refer to specific markings on your sensor for adjustment dials for 'TIME' and 'LUX' settings, if present).
- Ambient Light Sensor (LUX): The sensor also includes an ambient light sensor. This prevents the light from activating during daylight hours, saving energy. The sensitivity of this sensor can often be adjusted to determine at what level of darkness the motion sensor becomes active.
6. Održavanje
- čišćenje: Da biste očistili uređaj, provjerite da li je napajanje isključeno. Obrišite mekom,amp krpom. Ne koristite abrazivna sredstva za čišćenje ili rastvarače, jer mogu oštetiti završnu obradu ili senzor.
- Zamjena žarulje: Always disconnect power before replacing the bulb. Allow the old bulb to cool completely. Carefully remove the old R7s bulb and insert a new R7s bulb (max 150W), avoiding direct contact with the glass.
- inspekcija: Povremeno provjeravajte uređaj na bilo kakve znakove oštećenja, labavih spojeva ili istrošenosti. Ako pronađete bilo kakve probleme, isključite napajanje i konsultujte se sa kvalifikovanim električarem.
7. Otkrivanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Svjetlo se ne pali. | No power supply. Blown bulb. Faulty wiring. Ambient light too high. | Check circuit breaker. Replace bulb. Verify wiring connections (consult electrician). Adjust LUX setting on sensor. |
| Svjetlo ostaje stalno uključeno. | Continuous motion detected. Sensor faulty. Wiring error. | Adjust sensor angle/sensitivity. Check for obstructions. Consult electrician. |
| Svjetlo se nasumično pali. | Sensor too sensitive. Environmental factors (wind, animals). | Reduce sensor sensitivity. Re-position sensor to avoid unwanted triggers. |
| Svetlo treperi. | Loose bulb. Incorrect bulb type. Power fluctuations. | Ensure bulb is seated correctly. Verify R7s 150W bulb. Consult electrician for power issues. |
8. Specifikacije
| Feature | Detalj |
|---|---|
| Brand | Sjajno |
| Broj modela | 96162/06 |
| Dimenzije proizvoda (D x Š x V) | 14 x 21 x 22 cm |
| Težina artikla | 521 grama |
| IP Rating | IP44 |
| Stil | Moderna |
| Boja | Crna |
| Materijal | Metal, staklo |
| Broj sijalica | 1 |
| Voltage | 230 Volts |
| Specifične upotrebe | Samo za vanjsku upotrebu |
| Posebne karakteristike | Adjustable (sensor/light head) |
| Cap Type | R7s |
| Max Wattage | 150W |
| Izvor napajanja | Electrical Cable (Wired) |
| Vrsta instalacije | Zidna montaža |
| Oznaka energije | A+ to E (for compatible bulbs) |
Figure 8.1: Energy label for the Brilliant Tanko 96162/06, indicating compatibility with bulbs from energy classes A++ to E.
9. Garancija i podrška
Information regarding specific warranty terms and spare parts availability for the Brilliant Tanko 96162/06 is not provided in the product data. For warranty claims, technical support, or inquiries about spare parts, please contact the retailer where you purchased the product or the manufacturer directly. Always have your proof of purchase and model number (96162/06) available when contacting support.
