1. Uvod
This manual provides essential information for the safe and effective operation, setup, and maintenance of your Einhell Power X-Change 140Nm Cordless Impact Driver TE-CI 18/1 Li Solo. Please read these instructions carefully before using the tool and keep them for future reference. This product is designed for driving and removing screws and for light drilling tasks in wood and metal, utilizing its impact mechanism for high torque applications.
2. Opća sigurnosna uputstva
Always observe the following safety precautions when using power tools to prevent electric shock, fire, and serious injury.
- Sigurnost radnog područja: Radno područje održavajte čistim i dobro osvijetljenim. Nered ili tamna područja mogu uzrokovati nesreće. Ne koristite električne alate u eksplozivnim atmosferama, kao što je prisustvo zapaljivih tekućina, plinova ili prašine.
- električna sigurnost: Izbjegavajte kontakt tijela sa uzemljenim ili uzemljenim površinama kao što su cijevi, radijatori, peći i hladnjaci. Postoji povećan rizik od strujnog udara ako je vaše tijelo uzemljeno.
- Lična sigurnost: Always wear eye protection. Use safety glasses, goggles, or a face shield. Wear hearing protection when operating the tool for extended periods. Dress properly; do not wear loose clothing or jewelry. Keep your hair, clothing, and gloves away from moving parts.
- Upotreba i njega alata: Ne forsirajte električni alat. Koristite odgovarajući električni alat za vašu primjenu. Posao će obavljati bolje i sigurnije brzinom za koju je dizajniran. Isključite bateriju iz električnog alata prije bilo kakvih podešavanja, promjene pribora ili skladištenja električnog alata.
- Upotreba i održavanje baterijskog paketa: Punite samo punjačem koji je odredio proizvođač. Punjač koji je prikladan za jednu vrstu baterije može stvoriti opasnost od požara kada se koristi s drugim paketom baterija. Koristite električne alate samo sa posebno određenim baterijama.
3. Proizvod je gotovview i karakteristike
The Einhell TE-CI 18/1 Li Solo is a cordless impact driver designed for efficient screwdriving tasks. It is part of the Power X-Change family, allowing for interchangeable battery use with other Einhell tools.
- Visoki izlazni moment: Delivers up to 140 Nm of torque, suitable for driving large or long screws.
- Kontrola varijabilne brzine: Electronic speed control allows for precise adjustment, ideal for delicate applications.
- 1/4" Hex Bit Mount: Features a 6.35 mm (1/4") hexagon fitting for quick and secure bit changes.
- Integrisano LED osvetljenje: Three power LEDs provide optimal illumination of the work area.
- Ergonomski dizajn: Short, lightweight design with Softgrip surfaces ensures comfortable and tireless operation.
- Izdržljiva konstrukcija: Features an aluminum housing and rubber supports for enhanced protection and ruggedness.
- kopča za pojas: A practical belt clip is included for convenient carrying and access during work.
Figure 1: The Einhell TE-CI 18/1 Li Solo Cordless Impact Driver, illustrating its compact design and the Power X-Change battery interface (battery sold separately).
4. Podešavanje
4.1 Ugradnja baterije (baterija i punjač se prodaju odvojeno)
- Ensure the battery is fully charged using an Einhell Power X-Change charger.
- Align the battery pack with the base of the impact driver.
- Slide the battery pack into the tool until it clicks securely into place. Ensure it is firmly seated before operation.
- Da biste uklonili bateriju, pritisnite dugme(a) za otpuštanje sa strane baterijskog modula i izvucite ga.
4.2 Bit Insertion and Removal
The impact driver uses a 1/4" (6.35 mm) hexagon fitting for impact-resistant bits.
- Pull the quick-change chuck sleeve forward.
- Insert the hexagon bit fully into the chuck.
- Release the sleeve. The bit should be securely locked in place. Pull on the bit to confirm it is properly seated.
- To remove the bit, pull the sleeve forward again and extract the bit.
Figure 2: Detail of the 1/4" hex bit mount and the three integrated LED lights, providing clear visibility of the work area.
5. Uputstvo za upotrebu
5.1 Uključivanje/isključivanje i kontrola brzine
- Početi: Press the ON/OFF switch (trigger). The integrated LEDs will illuminate the work area.
- Podešavanje brzine: The speed of the impact driver is controlled by the pressure applied to the ON/OFF switch. Pressing lightly results in lower speed, while pressing fully increases the speed up to 2300 RPM.
- Zaustaviti: Otpustite prekidač za uključivanje/isključivanje.
5.2 Smjer rotacije
The direction of rotation (forward/reverse) is controlled by the selector switch located above the trigger.
- Rotacija prema naprijed (uvrtanje): Push the selector switch to the left.
- Obrnuta rotacija (odvrtanje): Push the selector switch to the right.
- Položaj zaključavanja: When the selector switch is in the middle position, the ON/OFF switch is locked, preventing accidental activation. Always engage the lock when not in use or when changing bits.
5.3 Using the Impact Driver
- Select the appropriate impact-resistant bit for your screw type and material.
- Position the bit firmly on the screw head.
- Start the tool by gently pressing the trigger, increasing pressure as needed. The impact mechanism will engage automatically when resistance is met, providing additional torque.
- Maintain a firm grip on the tool. The low reverse torque design helps reduce strain on the user.
Figure 3: An individual demonstrating the use of the Einhell impact driver for driving a screw into a wooden surface, highlighting its practical application.
6. Održavanje
Redovno održavanje osigurava dugotrajnost i optimalne performanse vašeg udarnog odvijača.
- čišćenje: Nakon svake upotrebe, očistite kućište alata mekom,amp krpu. Ne koristite jake hemikalije ili abrazivna sredstva za čišćenje. Osigurajte da su ventilacijski otvori čisti od prašine i ostataka.
- Skladištenje: Store the impact driver and battery pack in a dry, secure location, away from direct sunlight and extreme temperatures. Ensure the battery is removed from the tool before storage.
- inspekcija: Periodically check all screws and fasteners for tightness. Inspect the power tool for any signs of damage or wear. Do not use a damaged tool.
7. Otkrivanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Alat se ne pokreće. | Battery not charged or improperly inserted. Selector switch in lock position. | Charge battery. Ensure battery is fully inserted. Move selector switch to forward or reverse. |
| Smanjena snaga ili performanse. | Low battery charge. Incorrect bit for application. Overheating. | Recharge battery. Use appropriate impact-rated bit. Allow tool to cool down. |
| Bit ne drži sigurno. | Chuck sleeve not fully released. Bit not fully inserted. | Ensure chuck sleeve snaps back into place. Push bit in completely. |
8. Specifikacije
| Feature | Detalj |
|---|---|
| Brand | Einhell |
| Broj modela | TE-CI 18/1 Li Solo (4510034) |
| Izvor napajanja | Napajanje baterijama (18V Power X-Change) |
| Maksimalna brzina rotacije | 2300 RPM |
| Maksimalni obrtni moment | 140 Njutn metara |
| Bit Mount | 1/4" (6.35 mm) Hexagon |
| Voltage | 18 Volts |
| Težina artikla | 1.18 kilograma (2.58 funti) |
| Dimenzije proizvoda | 7.8 cm D x 3.03 cm Š x 6.65 cm V |
| Materijal | Rubber, Aluminium |
| Uključene komponente | Akku-Schlagschrauber (Impact Driver Body Only) |
| Baterije uključene? | br |
| Baterije su potrebne? | Yes (18V Lithium Ion) |
9. Garancija i podrška
Einhell Power Tools come with a standard 2-year warranty. An additional 1-year warranty is available upon product registration, extending the total warranty period to 3 years. For warranty claims, technical support, or spare parts, please contact Einhell customer service or visit the official Einhell website.
The intelligent ABS Battery Electronics and high-performance Li-Ion cells in Power X-Change batteries ensure efficiency, reliability, and durability.
