JBL ST 450 TRIO Super Tweeter Instruction Manual

1. Uvod

The JBL ST 450 TRIO Super Tweeter is designed for high-frequency sound reproduction with efficiency and low distortion. This component is suitable for various audio applications, including PA systems, automotive mini trios, and general sound reinforcement systems. Its phenolic diaphragm ensures a clear high-frequency timbre, while the aluminum ring magnetic assembly provides definition and efficiency across its operational range.

2. Sigurnosne informacije

Please read all safety instructions before installing and operating this product. Failure to follow these instructions may result in injury or damage to the product or other equipment.

• električna sigurnost: Ensure all power connections are made correctly and securely. Disconnect power before making any connections or disconnections. Incorrect wiring can cause electrical shock or damage to your audio system.
• Zaštita sluha: Dugotrajno izlaganje visokim nivoima zvučnog pritiska može uzrokovati trajno oštećenje sluha. Budite oprezni prilikom podešavanja nivoa jačine zvuka.
• Instalacija: Always mount the tweeter securely to prevent it from becoming a projectile in case of sudden stops or accidents. Consult a professional installer if you are unsure about any aspect of the installation process.
• ventilacija: Ensure adequate ventilation around the tweeter to prevent overheating, especially during extended use at high power levels.

3. Sadržaj paketa

Provjerite da li su sve stavke prisutne u paketu:

• 1 x JBL ST 450 TRIO Super Tweeter
• Tehnička brošura
• Garantni list
• Bearing (as included component)

4. Postavljanje i instalacija

Proper installation is crucial for optimal performance and safety. If you are not confident in your ability to install this product, seek assistance from a qualified professional.

4.1 Montaža

The ST 450 TRIO is designed for flush mount installation. Choose a mounting location that provides adequate space for the tweeter and its wiring, and ensures it is securely fastened to a stable surface. Avoid locations where the tweeter could be exposed to excessive moisture or direct sunlight.

Slika 1: Bočna strana view of the JBL ST 450 TRIO Super Tweeter, illustrating its flush mount design and connection terminals.

4.2 Ožičenje

The tweeter has a rated impedance of 8 Ohms. Connect the tweeter to an appropriate amplifier output, ensuring that the amplifier can handle an 8-Ohm load. Pay close attention to polarity (+ and -) to ensure correct phase alignment with other speakers in your system. Incorrect polarity can lead to reduced sound quality.

Slika 2: Pod uglom view of the JBL ST 450 TRIO Super Tweeter, highlighting the robust magnet structure and clearly marked connection points for wiring.

It is recommended to use a high-pass filter to protect the tweeter from low frequencies, which can cause damage. Refer to your amplifier or crossover unit's manual for proper filter settings. The system frequency response for this tweeter is 4000 to 20000 Hz.

5. Uputstvo za upotrebu

Once installed and wired correctly, the JBL ST 450 TRIO Super Tweeter is ready for operation.

• Rukovanje snagom: The tweeter has an RMS Power of 300W and a Peak Power of 600W. Ensure that the amplifier's output power does not exceed these limits to prevent damage.
• Kontrola jačine zvuka: Start with a low volume level and gradually increase it to your desired listening level. Avoid operating the system at excessively high volumes for extended periods.
• Podešavanje zvuka: Use your audio system's equalizer or tone controls to fine-tune the high-frequency output to your preference. Remember that the tweeter is designed to reproduce high frequencies, so excessive boosting of treble may lead to harsh sound or potential damage.

6. Održavanje

The JBL ST 450 TRIO Super Tweeter requires minimal maintenance to ensure long-lasting performance.

• čišćenje: Use a soft, dry cloth to gently wipe the surface of the tweeter. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the finish or internal components.
• inspekcija: Periodically check the wiring connections to ensure they remain secure. Inspect the tweeter for any signs of physical damage.

7. Otkrivanje problema

If you experience issues with your JBL ST 450 TRIO Super Tweeter, refer to the following common problems and solutions:

• Nema zvuka:
  • Provjerite sve ožičenja od amplifier to the tweeter for proper contact and polarity.
  • Osigurajte ampLifier je uključen i radi ispravno.
  • Verify that the audio source is playing and the volume is turned up.
• izobličeni zvuk:
  • Smanjite nivo jačine zvuka. Izobličenje se često javlja kada amplifier or tweeter is overdriven.
  • Check for proper high-pass filter settings to prevent low frequencies from reaching the tweeter.
  • Inspect the tweeter for any physical damage to the diaphragm.
• Isprekidan zvuk:
  • Check for loose wiring connections at both the tweeter and the amplifier.
  • Ensure there are no shorts in the wiring.

If these steps do not resolve the issue, contact customer support or a qualified service technician.

8. Specifikacije

Slika 3: Vrh view of the JBL ST 450 TRIO Super Tweeter, displaying the brand and model details.

9. Garancija i podrška

This JBL product comes with a limited warranty. Please refer to the included Warranty Leaflet for detailed terms and conditions regarding coverage, duration, and claims procedures.

For technical support, service, or further inquiries, please visit the official JBL webweb-mjesto ili kontaktirajte njihovu službu za korisnike. Sačuvajte račun kao dokaz o kupovini za reklamacije u slučaju garancije.